-
Purchased S88 MK3 a month ago. Turns out the inverted Sustain pedal wrong recall is not fixed.
Hello. I was pulling my hair because the pedal randomly inverts on my MK3 on each keyboard boot. I checked with MIDIOx and can confirm it does that. I can never know if the pedal is going to work correctly and often I need to either reboot the keyboard or fix it in the MK3 OS. Is there any ETA for a fix? It is quite an…
-
Roland RPU3 comaptible with S88 MK3?
Hi there, Scrolling through many discussions, I have not found a clear answer, whether the 3 pedal unit of Roland RPU3 is compatible with S88 MK3. there are 3 continuous controlling pedals in the RPU3 and I wonder that one of them can be assigned as a sustain with half pedaling.
-
Konplete Kontrol Template and Sustain Pedal MIDI Channel
Hi guys, I’ve been having a problem with the sustain pedal on my S61 MkII; it’s a standard Roland DP10 Piano Style pedal, and as far as I can tell the pedal is working perfectly. I switch between 4 saved templates when playing live, they’re all pretty similar with each transmitting on a different MIDI channel depending on…
-
Sustain Pedal Not Releasing Properly on Some MIDI Files in Kontakt 7 Player
Hi, I generated some piano MIDI files using different versions of Musescore (mainly 3.x and 4.x). When I import them into Reaper or any other DAW, these MIDI files play seamlessly on Decent Sampler or Labs Spitfire with almost all my piano samples. However, when I use Kontakt 7 Player, the sustain pedal does not release…
-
Trying to set up Yamaha FC3A pedal - what am I doing wrong?
Trying to get a Yamaha FC3A pedal working with my S61 Mk3 - and so far no joy (other than a random moment that it started to work but then it stopped again). Having tried to trouble shoot with the manual and instruction vid, there seems to be a discrepancy with the way the pages are laid out for me. Essentially I'm seeing:…
-
Pedals with Komplete Kontrol 3.3.1 cannot be changed separately
On the newest version of komplete kontrol 3.3.1 i have the problem that i cannot use sustain pedal and expression at the same time (pedal a and b) with a S61 mk2. i have a sustain pedal in pedal a configured to switch . when i change to pedal b for continous controller configuration pedal a is continious too . It seems…
-
My sustain pedal is not working for Kontakt
I use Kontakt 7 as a plug-in for mainstage. when I load up a library, the piano is sustained the whole time. I tried to look for the problem but I couldn't seem to find the solution for it. My MIDI keyboard is an Arturia keylab essential and my sustain pedal is proline universal with a polarity switch.
-
KK S61 Mk3 sustain pedal invert problem
Since it seems that you can't contact support on NI website (thanks), I'll list my problem here: Every time I fire up my new KK S61 Mk3, the sustain pedal behaves wrong, meaning that it sustains the sound when it's not pressed. I have to go into settings each time and change whatever value is there (normal/invert) in order…
-
Pedal for S61 Mk3?
I'm wanting to add a pedal to the S61 Mk3 that I've had for six months now. However, I am wondering if there is a pedal that would give me more than 'sustain' that I should look at? I have the list from the website, but I admit to only having used pedals on a piano before so I was wondering if there were other things you…
-
Kontrol S61 mk3 incorrect sustain pedal values
After power on of the keyboard the sustain pedal always trigger cc64 value 0 when sustain pedal is pressed and value 127 on release. This is independent on invert or not invert setting. As soon as I modify any setting for the sustain pedal (for instance change off value from 0 to 1) the values sent are reveresed and the…
-
Foot Pedal with Native Instruments?
Hello, I own a Komplete Kontrol A49 from Native Instruments and recently bought an M-Audio SP-2 sustain pedal. I plugged it into the "Foot Pedal" input at the back. However, the pedal does not seem to work. In various programs, such as the Basic Piano from Native Instruments, nothing happens when I press the pedal.…
-
Sustain Pedal issue with A49 keyboard
I have owned an A49 for several years but never connected a sustain pedal to it. I just bought an M-Audio SP-2 and for some reason I just can't get it to work. I have tried the following: The sustain pedal works fine when used on other keyboards, and I have tried with the polarity switch in both positions With a MIDI…
-
Noire CC64 Controller (Sustain)
Hello. I tested the behavior of the CC64 controller in VST Noire because the sustain of the instrument seemed unnatural to me. (See table). The behavior was measured from note A1 - A7. Normally, you would expect the behavior of a piano pedal to be even. This is not the case with the Noire VST. The measurements result in…
-
MK3 Keyboard with 2+ Pedals MIDI CC not working properly?
Does anyone else have an issue with MK3 Keyboard sending the wrong MIDI CC when using multiple Continuous Control pedals? I have a MK3 88 and Roland RPU-3 triple half-damper pedals (3 TRS cables) connected as continous controllers sending MIDI 64, 66, and 67 to my Hydrasynth desktops modulation matrix and Kontakt. When 1…
-
roblem with my sustain pedal MK3
Hello, I have a problem with my sustain pedal. I have the Komplete Kontrol S88 MK3. For about 6 days, the Komplete Kontrol software has not been recognizing my sustain pedal anymore. Other programs like Opus and Halion Sonic recognize it without any problems. I think it is a routing issue within the software. When pressing…
-
S88 Mk3 controller/sustain pedal
I hook up my S88 MK3 to Ableton via my computer USB but was also hoping to connect an external keyboard to the controller for purpose of using S88 Mk3 sustain pedal to work with my external keyboard via midi cable. My Novation keyboard allows this but so far, I only have read where it's either USB or Midi cable out of the…
-
Sustain pedal ports no longer seem to be working.
I'm reviewed both of these: https://support.native-instruments.com/hc/en-us/articles/115005166305-How-to-Configure-Sustain-Expression-Pedals-on-Kontrol-Keyboards https://community.native-instruments.com/discussion/5234/tips-how-to-fix-sustain-pedal-issues-on-our-mk2-keyboards Issue occurs on either macOS or Windows.…
-
Script: Virtual Sustain Pedal From Pitch Bend
Here is a little script I wrote that I find really useful: https://gist.github.com/shcipwa/1050ac04e295dee1a6c2767eeef8a766 I originally wrote this for playing Piano using Native Instruments Maschine without a sustain pedal, but should work with any keyboard with a pitch bend wheel. It works great because the Maschine MK3…
-
Does sustain pedal work on The Gentleman?
My Maschine session is loaded with sampled instruments and Kontakt's The Gentleman. All sampled instruments respond fine to the sustain pedal attached to my MIDI keyboard. Gentleman does not. Even though the 'red light' for PEDAL does lights up when pressing, I release keys and sound goes off, just like if no pedal is…
-
Continuous sustain pedal still works in opposite way
I have tried to connect my Yamaha continuous sustain pedal to my S88 mk3. With all the settings according the manual and calibrated. It seems to work, but regardless of whether Invert mode is on or off, it still works in the opposite direction. What did I do wrong