Help, Learn and Connect

Recent discussions

Why is my VST taking a long time to install?
I have recently purchased NOIRE and downloaded it through Native Access. It downloaded for about an hour, but it's now stuck on the "Installing" phase for well over 20 hours at this point. How do I fix this?
Any Kontakt 8 update to NOIRE?
With Claire being released, will we see an upgrade to NOIRE? The instrument already looks a bit old compared to Claire even though it is part of the same series of Pianos. In the life cycle product plans why are we not seeing consistency in product looks? These are sibling instruments. Would like to see an updated Kontakt…
Unsolvable problem with Native Access 2 Error: "Error while mounting disk image"
I can not install my new bought pack "Noire" and will recive the Error: "Error while mounting disk image". I already tried to follow the step by step guide provided by NI https://support.native-instruments.com/hc/en-us/articles/5446176600081-Native-Access-2-Error-Error-while-mounting-disk-imageUnfortunatly I cannot find…
Noire needing 35x library size to install. What are my options?
With the Noire library listed at 16Gb, I expected to need up to 4x for install. But it's requiring 560Gb (35x). I planned to get an external drive if I needed it, but I now understand that the local space requirement remains for install, even if the library is stored externally. Is there a workaround, or do I need to…
NOIRE 1.2.0 with High Sierra?
Any possibility to use NOIRE on High Sierra? There MUST be solutions … Thanks ….
How to save repedal and half pedal settings in Noire?
I have recently changed to a continuous sustain pedal. I was able to change the pedal settings in Komplete Kontrol and it works when I enable repedal and half pedal in Noire. Otherwise, it turns the pedal on and off constantly at the bottom of the range. Every time Noire loads, it resets to repedal/half pedal "off", and I…
Noire can no longer load on Kontakt 6
I just bulk updated my plugins and can no longer load Noire. Kontakt is on version 6.8.0 and Noire is on 1.2.0. I'm getting the message "Your version of Kontakt is too old to load this file. Please update to the latest version." I'm on the latest version of Kontakt 6... is NI really expecting me to buy the latest version…
Noire CC64 Controller (Sustain)
Hello. I tested the behavior of the CC64 controller in VST Noire because the sustain of the instrument seemed unnatural to me. (See table). The behavior was measured from note A1 - A7. Normally, you would expect the behavior of a piano pedal to be even. This is not the case with the Noire VST. The measurements result in…
Volume on Noire
Good day One Question to Noire. Will you ever adapt the volume of the Kontakt samples so that they roughly have the same loudness than all your other instruments? Noire always opens up very quiet and I always need to turn the volume up in order I can hear it kind of as loud as any of your other instruments/patches... Would…
loud clicking in some Noire samples and not others
There is a very particular CLICK on the attack of some higher notes that cannot be lessened with lower velocity or with any of the controls in the plugin UI. It is not mechanical or pedal noise or particles. Any tips? (see Noir Vibrant Felt ~ F#5) Here is an example, especially in the second half (sustain pedal is turned…
Instruments and Maschine + in standalone mode : some questions
Hi NI Users, I will be glad if some of you could help me on the following points _that might be raised by other Maschine plus users. Thank you very much for any answer! 🙏 I've bought my Maschine Plus one week ago and received it four days ago. My initial wish was to be able to record some finger drumming in standalone…
Pitchbend error in Kontakt 7 "Noire"
Hello, I have a problem with the pitch band. I go via MIDI OUT from Ezkeys 2 into MIDI IN of Kontakt 7 into the VST "NOIRE". Every time the 4 bars are finished in FL Studio and the loop starts from the beginning, Tune automatically moves down by 2 points. Unfortunately, I don't know which software is causing this error. I…
Cant download ''Noire'' in Native Access
I have bought noire and got it into the program but when I try to download it (on an external usb) it always stops at 4.29gb. When I look in the USB, there is an iso file that is 4.29Gb. What is going on? Do I have to download it to my hard drive? Because I tried it first but then it said I don't have enough space. I have…
Is there a defect in the Noire piano samples?
I recorded a song at the beginning of the year that used the Noire Pure - Dark preset. When I had it mixed/mastered by a 3rd party, they boosted the mid-high frequencies because otherwise, the piano would be impossible to hear behind other instruments that are strong in the low-mid and mid-range frequencies. I decided to…
Your version of Kontakt is too old - How do I solve this problem?
When trying to load Noire and several other instruments in Kontakt, I get an error message that says "Your version of Kontakt is too old to load this file. Please update to the latest version." I have re-installed both Kontakt and Noire and the problem persists. What is even stranger is that when I open a project that had…
How to extract Noire's particles engine in a midi track in Logic ?
Hello, I bought Noire and the sound is amazing. However, something is bothering me. I can record the MIDI FX output in Logic Pro (like an arpeggiator). But I can't record midi notes that are generated by a plugin in Kontakt, like the particles engine within Noire. Any idea how I could do that ? is it even possible ? The…
Does Noire Work on IOS 10.14.6 ?
I downloaded a version of Native Access 3.2.3 (Intel) so that it can run on my IOS. It runs well, but when I go to download Noire (along with the Kontact application that it needs to run the software) Noire does not download. I tried downloading Kontact 6 player separately into the applications section of my Mac, under the…
Noire VST / AAX ?
Hey guys, I was wondering if any of you know how many instances of Noire can be downloaded for one purchase? I'm assuming most Native Instruments plugins allow you to download the plugin on max two separate computers. Is that the case for Noire as well? And can it be used in Protools? Thanks!
Noire keeps making a pedal sound even when I turn it off
I'm dealing with this frustrating bug where Noire still keeps playing the pedal sound even though I turned it off in the software. It makes the software completely unusable, and I hate it when I'm playing live and I press that pedal and everyone stares at the speaker confused by that pedal sound. How do I fix this bug??…
Noire - Issues with harmonics / overtones / resonant frequencies
I have been using Noire for a while now, and I really like it. But the more I produce, the better my ears get .... and I'm now beginning to hear very strange things happening with a lot of the samples notes in Noire - especially in the higher registers. Very strange .... "noises" I guess. They sometimes sound like…

Sign in to unlock member-only content

New questions

Not seeing Komplete Kontrol in my library
Hello! I purchased a S61MK2 last February, downloaded Komplete Kontrol, and am using it. I now am trying to set it up on my laptop but when I log in to my Native Acess app I do not see Komplete Kontrol in my library. I read that there is a limit of 3 computers that you can install on, but this is only my second computer.…
software Maschin
hello very good, I have bought the MASCHINE MIKRO 3 and in the Native access application it does not come to me to download the Maschine software for free, so I cannot use my drum machine. Does anyone know why it doesn't come to me to download? Thank you.
native access will not work
native access will not work i have done all of the sugg things now it just hopless is there any resolve in site
Should I uninstall previous versions of Gtr Rig, or Kontact 7 & 6?
If it matters, I'm using the S88 Mk1 with KK2.9.6.
Set loop length for clips
I love arranging my songs using only clips. I use "double/duplicate" and in-place editing events, but how can I increase the loop size (end point) on the CLIPS screen? It only loops the first part of the inserted clip M+ standalone mode question
Cremona Quartet compatibility Kontakt 7 - product mentioned Kontakt 6.2
Hi I bought Cremona quartet through NI and upon installing it says I need kontakt 7. On the product page it said I needed 6.2 at least… I have 6.8 and I cannot update to 7. How do I open a ticket and/or what do I do? thanks!
Feature Request : Get names from Synth like Akai VIP does ?
Hi, Is there any sort of way the developers can add the simple feature, " Get Names from Synth or Effect " ? This was possible in AKAI VIP software many years ago and made saving new sounds a breeze. Thanks
Traktor 4 - new control vinyl and cd dvs issue
Hi, I recently purchased new control vinyl and cd's from the NI store and am experiencing calibration issues. Screenshot below is cd top left and vinyl bottom right. The interesting thing is I managed to dig out my 12+ year old traktor cd which appeared to be doing much better Any idea on what could be causing this and how…
How do you find a NaN with only one specific note pitch?
hello community, I'm trying to convert my extremely power-hungry primary FM synth (https://www.native-instruments.com/en/reaktor-community/reaktor-user-library/entry/show/14617/) to core as much as possible. (The fact that the primary version barely runs on the Intel i7, but runs very well on the Apple Silicon M1, and that…
Session Percussionist Demo
Morning, I bought the app percussionnist. But it still shows me a demo