-
NTKDaemon requesting login details every time I turn on my Mac. Have followed previous steps
I'm still receiving login requests to NTKDaemon whenever I turn on my Mac. I've followed the steps in the previous post listed below: The steps I've followed are: Open your Mac's System Preferences and click Security & Privacy. Under the Privacy tab, choose Full Disk Access from the side bar. Click the lock icon in the…
-
How do you get NA to see NTK Daemon is running?
I have had no issues using Native Access for a while and then it auto-updated from 3.17 to 3.18 and now it does not work and I have no access to add my purchases to the library. I am running Kontact 8 and that still works, as well as all my other programs like Pulse. When I open Native Access it runs 5 or so powershell…
-
Another NTKDaemon installation topic
Since yesterday im trying to install Native Access 2, but i couldnt pass the NTKDaemon part. I think i tried every solution i found about this problem, including official articles on support page. I tried installing with/without "run as administrator", i ran gpedit.msc and added a lot of users (a lot of, because i wasnt…
-
How do i install NTKDaemon?
I'm a first time customer, and i have issues with downloading NTKDaemon for Native Access. It starts downloading for a little bit, but then it shows the error message "NTKDaemon Setup has failed: "FALSE". Please check your settings and try again." I looked on these forums, and someone had the same issue, but the…
-
NTKDaemon has failed to start. I have done EVERYTHING!
I have done everything from reinstalling multiple times to going into gpedit and adding user policy privileges, I don't know what else I can do! Has anyone run into this issue before?
-
Native Access, now with Uninstall!
Hi everyone, Been a long time coming, but as of version 3.6.0, Native Access now allows you to uninstall instruments and expansions! If you navigate to your installed product, you'll see an option to uninstall. There you will be prompted if you're sure, and then proceeds to uninstall your products. However, not all…
-
NTK Daemon ''Error Service' NTK Daemon Service' failed to start
I cannot install NTK Daemon which is needed to download Native Access. The same message appears every time: ''Error Service' NTK DaemonService' failed to start. Verify that you have sufficient privileges to start service. '' I've tried many things but nothing works. Please help. Thanks, Kornel
-
Native Access installation issues
(Windows 11) I am unable to install Native Access 2. Even though I am running the installer as an Admin, I keep getting the warning; "Service 'NTKDaemonService' failed to start. Verify that you have sufficient privileges to start system services." When I try to start the service manually, I get a warning saying "the system…
-
Can't install NTKdaemon
I was told to install NTKdaemon to fix my access grant problem on Native Access. However, I get this error whenever i try to install NTKdaemon. I
-
Impossible to instal Native Access 2, cannot install & use products I have bought
Good morning, I have recently bought Vibe Rewind VST and it specifically said I have to upgrade to Native Access 2. I went to Native Access app to check if I do not already have version 2, it offered me an update, I clicked yes and that is where it all went to sh... NTK Daemon failed to start and from that time I am not…
-
NTKDaemon for Native Access won't install
Hi, I would be grateful if anyone is able to help. I previously created a tech support ticket for Native Access. I'm currently working on a timeline and have purchased products last week and was looking to install the products purchased. I am getting the following error messages shown in the pictures and can no longer get…
-
Can't install anything with Native Access, Tried EVERYTHING for HOURS
Using : Sequoia 16.1.1 - Mac M1 Ultra 4TB I am LOOSING MY PATIENCE with this for real. Spent about 5 hours trying to get Native Access to install ANYTHING. NOT WORKING YES I have NTK Daemon and Native Access added in Full Disc Access I have removed Native Access and the NTK Daemon so many times I am not getting anywhere. I…
-
Dependency Installation Process is taking longer than normal while installing Native access
When trying to install Native Access.exe file I downloaded from the official NI site the app says "Dependency Installation Process is taking longer than normal" and it loads forever. I checked some solutions online and these are the thing I tried and it still doesn't load: I tried running native acces.exe file as an…
-
Native Access refuses to install, tried just about everything, any suggestions?
Tried uninstalling, reinstalling, replacing NTKdaemon.exe, etc. Now I have a headache.
-
NTKDaemon on Mac, have to grant permission to install helper
Every time I restart my iMac (2017 macOS13.7) I have to grant permission for the NTKDaemon to install a helper tool. I've followed all NI instructions to grant access to all NI apps but it continues. What am I missing?
-
Why does NTKDaemon want to run as a login item?
Hi, this question is more to NI itself, then to the Community but anyways. Why NTKDaemon wants to install itself as a login item every time I start Native Access app (which is a horrible behemoth by itself, btw)? It is really required to download files from the Internet, to have a daemon app running for all times? I am…
-
To all users who experienced crashes with Native Access 3.11.0.
Hi everyone, Native Access recently released 3.11.1. This is a hotfix to address the situation where some users are no longer able to open Native Access. This was caused by an update to our build systems that unintentionally wasn't actively supporting MacOS 11 anymore. We managed to recover the issue and tested it with a…
-
Native Access Update failed - Fix it by Using Task Manager to Stop the Running Process NTK Daemon
Hi NI Team and Community Members, i open my Native Access to check for Updates for my installed Products. Since Yesterday it want to Update NTK Daemon but had an Issue to deleting running Services. So i tried again to Install NI-Access after i removed it over the Control Panel. While the Install Process is running and it…
-
The NTKDaemon install wizard is failing.
I am trying to launch my native access and the dependencies won't install becuase the NTKDaemon install wizard says ERROR and that I need to verify that I have sufficient priviliages to start the system services, and then I'll click on "Retry" and it will do the same thing. What are my "privileges" and how can I fix this?
-
Native Access - failed installation (with full disk access)
Hello, I am unable to install any effects from my library via Native Access. Version 3.9.1 (92457bd / 1.16.0.0) I receive the error message that NTKDaemon requires full disk access - but it does have this according to my System Prefs, as does the app. I have undertaken full uninstallation and new installation several times…
-
Native Access - Q3 Update
Hi all, Since we did a mid Q2 update post announcing our plans to better support Native Access and address the myriad of issues that have been appearing lately, I wanted to briefly create an update post to let you all know how we're progressing on this commitment. First Release Native Access shipped 3.12.0 at the start of…
-
NTKDaemon Service not running/closing itself | Native Access Trouble
I am having problems with Native Access and I am pretty sure that the NTKDaemon Service is the origin of that. What happened: I have reset my computer fully, installed windows 11 and downloaded Native Access which worked fine until yesterday. The NTKDaemon Service was running in the background and Native Access worked, I…
-
Native Access 3.12.1 Windows Unable to Start
After updating to the latest version of NA (3.12.1 as of this post), I was stuck on the “Please grant permission to Native Access to install dependencies.” page. Native access has worked fine before the update, and I haven't changed any settings. The usual uninstall-reinstall didn't help either. I have tried updating to…
-
Native Access - Mid Q2 Update
Hi all, Q2 is almost done, so I understand this post comes late. I had a DevTalks article prepared for after the subscription launch to discuss the topic of Onboarding, but given the state of Native Access at the moment, it didn’t feel right to publish this at this moment. Instead, we’ve reconvened and readjusted our…
-
NI Help- Private consultation or real person.
I've granted access to NTK Daemon and everything else that's recommended, but Native Access is still telling me in needs access permission. This is getting so frustrating. Looking for private consultation or a real person for help.
-
Please grant permisson to Native Access to install dependencies...
What should i do to fix this? I've tried to reinstall NTKDaemon several times, to reboot my pc and to reintall Native Access. Nothing worked out
-
Known issues
Hi everyone, Native Access 3.11.0 is out. As many of you know by now, we've begun rolling out the 360 subscription offering. 3.10.0 was our first release to address some enhancements to the subscription launch experience, but we're aware of the regressions that have been caused since then. I want to acknowledge the…
-
NTKDaemon Winow pops up every time i start my Mac
This Window pops up: I cannot install cancel it. I tried both options. Next start the window pops up again. How can i fix this ? ✌️ Macbook Pro, M12, 16GB, Sonoma 14.5
-
NKTDaemonService failed to start.
Hello! I bought Kontakt, than when I tried to install it I have this problem with NTKDaemon "NTKDaemonService failed to start. Verify that you have sufficient privileges to start system services". I already tried to start it as an administrator and change the permition to direction but problem is the same. NTKDaemon don't…
-
cant install native access (NTKDaemonService)
I recently accidentally uninstalled something from NI and now when I start my machine software (1.8) my controller (MK2) is no longer recognized
-
Native Access 3.1.0 and dependency / dependencies installation
Hey all, The new version of Native Access (3.1.0) should address some of the following issues: Please grant permission to NTKDaemon to install Dependencies (Mac and Win) Dependency Installation is taking longer than normal (Mac and Win) Since auto updating is not possible in these situations, please download the latest…
-
Native Access installation failed NTK Daemon installation failed
Hi All, I have problem to install native access. It turns out that NTKDaemon service doesn start... I´ve tried already all the official Native Instruments steps Win 11 Pro 64 bit Processor Intel Core i7-10850H 32 GB DDR4 RAM Any help is aprechiated! Thanks
-
How Do You Fix NTKDaemon & Native Access Full Disk Access to Resolve Failed Installation
In Native Access I'm trying to reinstall/ update the machine 2 app because the application was removed from my computer and Native Access is requiring, It and NTKDaemon + NIHardware to have full disk access in order for the installation to work. However I have granted them the full disk access and I am still receiving the…
-
NTKDaemon still using too much CPU time
I am getting sick of this. It stays at close to 5 % (typically 4.6% to 4.9%) usage for a very long time when I start my computer and again when I open Native Access. This has been happening for a long time - over a year, but I'm not sure exactly which version of NA it started with. Also, NA constantly gets stuck on…
-
NTKDaemon installation issue
When trying to install Native Access 2, I am being blocked by this message: "A more recent version of NTKDaemon was found. Installation will quit." I have already installed NTKDaemon and re-installed Native Access 2, but it's still not working. What should I do?
-
Why does the installer require Rosetta?
I am trying to install Native Access on my Macbook Pro with M3 Pro chip, but during the installation process I am required to install Rosetta. I therefore doubt that the installer does not yet have a native version for Apple Silicon while the Native Instruments programs themselves do. Is that correct or is there something…
-
Native Access Q1 Update
Hi everyone, Welcome to another quarterly update! Before we jump into things, I want to deeply apologize for the service instabilities on January 22, thank you for your patience, and remind you that our services are back up at usual capacity. I’ll follow up with more information after our postmortem to share what happened…
-
NTKDaemon
Hello, NTK daemon did not install when installing Native access and so I was wondering where to download NTKDaemon ?
-
How to fix: NKTDaemonService failed to start. Verify that you have sufficient privileges to start…
Hey community, I tried to delete all data from NI from my Windows computer. I wanted to re-download everything onto a new drive and deleting everything one by one was too much of a hassle. That's why I deleted the entire hard drive, searched for NKTDaemon etc. in the task manager and deleted them as well. Also searched for…
-
Native Access 3.8.0 now live!
Hi all. 3.8.0 has finally been shipped! This is the release that we hope should address some download issues, and officially supports Sonoma for MacOS. We did a lot of work on the tech behind the scenes, so we're monitoring this version very closely. We welcome any bug reports through our support workflow here, so we can…
-
Issues with Native Access - 22nd and 23rd of January 2024
Hi everyone, PM of Native Access here. We had some scheduled maintenance slated for today. Unfortunately, we encountered a severe issue in some of our underlying services that we’re still busy resolving as a result of these efforts. Sadly, none of these issues occurred on our internal infrastructure during testing. As a…
-
Can't open Native Access 2 "grant permission to Native Access for installing dependencies..."
I installed NTKDaemon & Native Access successfully but when I try to open Native Access I get the "grant permission to Native Access for installing dependencies..." & then freezes. I tried gpedit-enabler.bat but it won't install on my Windows 10 Home. Does anyone have a solution for this problem? Thanks, Domenic
-
Native Access Install Windows 8 NTKDaemon fails error
I'm trying to install Native Access on my Windows 8 PC so I can use the Luke Holland plugin I got. Windows 8 is old and sucks, I'm fully aware. While installing, I make it to the point where it runs another installer for the Native Instruments NTKDaemon. This fails. I have full administrator privileges. I right-clicked…
-
Native Access - Q4 Update
Hi everyone. Apologies for the delayed post about our Q4 plans. Today I want to give you all an update on the progress on our existing workload, and share a bit about what we have coming up. Q3 Review Last quarter was dedicated to addressing our user base’s top feedback points, which were: Download Manager stability issues…
-
NTKDeamon using high amounts of my cpu while not open.
Hi, I've looked pretty much everywhere and couldn't find the answer to my problem. I saw a post on here where a NI PT said that they are trying to fix the NTKDeamon issue in march... Anyone knows how to fix this problem?
-
I have problem using KOMPLETE 13 ULTIMATE COLLECTOR'S EDITION
Hello, I have bought Komplete 13 Ultimate collector's edition and installed the sounds in an external drive. Since I bought it, whenever I am using one of it's sounds I always encounter problems. Sometimes Logic Pro crash, sometimes I get a message telling me that there is problem with sample and the sound I play sound…
-
NTKDaemon installation failed issue
Hello, I'm trying to install Traktor Pro 3 on a Mac running on Mojave, to activate it I needed to install Native Access, et in the start-up of NA, the installation of NTKDaemon starts & fails every time, is this a commonly known issue ? I tested the multiple solutions I found in the discussion below without much luck :…
-
Problems updating/installing to an External Hard Drive
Hi All, I've just updated to Komplete 14 Standard and Native access fails to install to an external hard drive (although Komplete 13 had no problems using this very same drive). I get the Installation Failed error message every time. I have given Full disk access to Native Access and the Daemon. I have no problems…
-
NTKdaemon
I just installed native access 2 and it said I need to install NTKdaemon. I use Mac, it showed up in my system preferences as an item to open at login. I decided to not have it open at login, is this bad? Also every time I open native access it asks me to put in my password to "install dependencies." Can anyone explain…
-
Known issue: Windows Defender flagging products as Trojans
Hi all, PM of Native Access here. Just wanted to let you all know we're aware that Windows Defender is deleting installers and flagging it as a Trojan, and are investigating the matter. We'll keep you posted on what we find and what actions we're taking. To start with, we've assessed that many products are affected, but…