-
Expression pedal volume value not 0 at s88 mk3
Currently using s88 mk3 and xvp-20 expansion pedal. I'm trying to adjust the volume using the expansion pedal in Complete Control, but the volume doesn't go to zero even if I lift the pedal altogether, but it's making a little noise. I set the minimum volume value to 0 in the expression pedal and even if I look at the MIDI…
-
S4 MK3 stops sending audio while everything contineus
hi, My MK2 is at repair shop and received a MK3 for replacement. MK3 suddenly stops sending audio to speakers and headphones while tracks continue playing. It start when the buttins suddenly respond very slow. Any button starts to respond very slow and few minutes after the sounds stops. Restarting solves the issue but…
-
Can i run a macro stored in cubase on a S88 MK3?
Hi all I have a komplete kontrol S88 mkIII connected with Cubase 14 pro on a macbook. My question: can i run a macro stored in cubase on the midi keyboard? Thanks for help Gerald
-
Another iteration issue
I have an issue here with iteration The iteration count is selectable between 13-32-64 up to 512 , done with buttons and value modules . These defines the length of each iteration ( and thus length of envelope ) It's then split by an order module , the first output going into a counter to create succesive iterations by…
-
Purchase date changed on registered product
Bugs purchase - I got an email today asking for review feedback on a product I supposedly purchased today. Turns out that NI's records show that it's just a date change, to today, in the historical records on something that I actually purchased and registered last year. I've asked NI to explain how it might have happened,…
-
Maschine 1 still usable?
Hello - We're dusting off an older Maschine Mk1 and wondering if it's still a usable piece of gear. I've tried downloading the most recent drivers from the website, but I keep getting error messages. Hope to use it with LUNA. Any info or suggestions much appreciated. Thank you! Is this piece of hardware too outdated to use?
-
Z1 and x1
What do people use for the pitch sliders? I would like to be able to use a couple of knobs for the sliders.
-
X1 MK3 Hub bricks Traktor / dead hub after 11 months
Suddenly after year of use integrated hub totally bricks Traktor. Settings which was working till yesterday: - Macbook Pro (OS latest, T4 latest) connected (with UDG USBC-USBB Cable) to X1MK3 - Z1 MK2 connected (with NI cable) to powered X1MK3 hub - AUDIO 6 connected (with NI cable) to powered X1MK3 hub Now: - if is…
-
Massive Prism Monark not loading in Maschine
Hello, I recently purchased a Maschine MK3 and I am having trouble running the following plugins with it on my MacBook Air (M2 chip, macOS 15.6 Beta): Massive Prism Monark The plugins either fail to load or show errors when I try to use them inside Maschine. I have installed everything through Native Access, and my…
-
issue with Traktor Pro 3
Dear Committee, I am currently facing an issue with Traktor Pro 3 when attempting to import a .tsi mapping file created for my Allen & Heath XONE:K2 MIDI controller. Each time I try to import the file via Preferences > Controller Manager > Import, I receive the error: "Error while parsing settings file on import"
-
Anyone have any luck with mapping and X1 mK1 to control the patter player?
I'm just trying to midi map the FX2 side of my mk1 Kontrol X1 to control the pattern player instead of using the onscreen/mouse option. I'd like to utilize the knobs and buttons on my X1 on the FX2 side of the controller. Im running Traktor Pro 4 , and have a F1 set up as a remix deck on deck C. Forgoing the fx2 channel…
-
iMac sequoia 15.5
Hi guys, So I finally decided to upgrade the software and computer since 2020, this is when I 1st purchased the S2 mk3, which came with TP2. I’ve upgraded from iPad to iMac Air and downloaded TP4. Here’s the issue, TP4 is not recognising the S2, so I’m unable to do any firmware updates etc. I also noticed that my product…
-
Aliciakeys no more not show in kontact8's select product
Hi everyone. I already use aliciakeys. But it no more not show in kontact8's select product list So. I have to load handly open aliciakeys.nki file. Then i use aliciakeys. How to show automatically product list in kontact8?
-
Guitar Rig 7 opens only on second plane
When I open Guitar Rig, I start to hear the distortion working, but no window appears. I can only find it running on task manager on second plane tasks. This issue started hapenning after I tried to test it as a plugin in Cantabile 4.0 (x64). This program crashed, so I didn't try again. I tried reinstalling Guitar Rig,…
-
Having trouble with license transfer for Traktor DJ 2 for TRAKTOR KONTROL S2 MK3
I just sold my Traktor S2 and I am trying to transfer the Traktor Kontrol license. In my version of Native Access, I have Traktor Pro 2 and Traktor Pro 3. When I went to transfer the license. Only Traktor Pro 2 showed up as an option. Question 1 - why can't I transfer the license for Traktor Pro 3? I went through the…