-
Looking for drum pad instrument
I cannot seem to find an instrument/ensemble that mimics the ubiquitous drum pad interface found on the Novation Launchpad, AKAI MPC, etc. A simple grid of pads (say 4x4) that can each be clicked to initiate a sound, whether that means triggering a sample or sending a MIDI note to a synth. A pad should light up while the…
-
Impact Soundworks Chro Nyx (JP-8080 Emulation)
Anyone tried this beast? With 31 oscillator engines, waveshapers, effects, 18 filter types and a complete mod matrix. it looks really serious and powerful. If so, how it sounds, compared with the Usual Suspects emulation? https://impactsoundworks.com/product/chro-nyx/ Note: Companies still invest in Reaktor. This means a…
-
Can someone verify that this works.
This is a simple VSTI. It has no sound but is suppose to get input velocities to match 4 various curves. I think it's sending out midi notes and is 128 voice polyphony but I don't know how to test it. Does anyone have a DAW that lets you chain VST instruments so the one following this responds to it's midi out? I think the…
-
Have you really given up on Reaktor, NI?
2025… Reaktor refresh one day ? it used to be one of my favourite tool in the NI ecosystem … This GUI is a true nightmare to work with … on a 5k display it's just impossible … look what the competitors do … resizable GUI for instance … Even M4L does it better … I'd love to see an update one day …
-
Who would build a midi velocity curve tool for me
Dear All, Anyone here to develop a Reaktor VST3 instrument preset which modifies the velocity of incoming midi notes (polyphonic) by a user definable velocity curve, and sends them to midi out? This way, I could have another instrument track in Cubase with the first track's midi out used as an input for any VSTi. There is…
-
[UGC] Super 8 Reaktor users rejoice! All Super 8 R2 (VST) presets are here!
I've decided to take the time and meticulously "convert" all missing 201 Super 8 R2 (VST) presets to its Reaktor counterpart... by recreating them from scratch 🥴 But instead of keeping them for myself, I want to share them here. Wave 3 is now available and consists of the presets below. This final release marks the end of…
-
Is reactor development dead? GUI needs an overhaul
Hi, since there's no way to contact the support other that talking to a sh*tty AI bot first which can't help anyway, here's a question some might be able to answer: For quite a long time I avoided using Reaktor blocks because it seems to be too complicated for me. But now, since I wrapped my head around it, it really…
-
How do I "fix" the paths so Reaktor updates work?
Hello, I've found similar problems to mine, but still no fix. I've emailed support but so far they have not been able to assist in resolving this. It must be something simple. Basically, I opened Native Access late last year and everything updates except certain files related to Reaktor. I also can no longer see the…
-
Help me work out the UI concept for a sequencer.
I'm building a sequencer. I'm working out note/time divisions and how to best represent them visually to make programming easy and straight forward. I have no experience with existing sequencers that are visually and practically based off of a hardware sequencer and how they work. Hence i am working out something workable…
-
I have a two instrument ensemble, is there a way to not save the two instruments together.
I have an ensemble with 2 instruments. One is for bass and guitar and the other is reverb. I'd like to be able to prevent the reverb patches from changing when I select a new guitar patch. It seems that once a patches is resaved then it also calls up the reverb patch that was selected when saved. So far the only options I…
-
Reface, bug fix, interface lifting of all R3,4,5 libraries....
I’ve always been in love with LazyFish, DaDash, Leboz, Brinkman, etc., but as time goes by their interfaces show more and more bugs. Is there a way to bring them up to date? Has anyone already started some kind of conversion or redevelopment? Thanks in advance! 😊
-
Reaktor player goes in demo mode when added an free ensemble from the Reaktor forum
My question is: Why goes Reaktor player in demo mode, as if it is the full version, after installing a free instrument (.ens file) from the Reaktor Forum. That would be ridiculous. I don't need the full version of Reaktor. Just want to experiment with it. Thanks in advance for answering!
-
Modal Resynth Feedback Problem
Hi! I took this EasyFFT resynthesis ensemble by Jan Brähler and replaced the sine bank with a modal bank to do a vocoder like thing https://www.native-instruments.com/en/reaktor-community/reaktor-user-library/entry/show/6729/ But there is a problem When the resynthesized sound is dynamic, if you set a long delay, it seems…
-
Searching easy to use drag&drop sampler for intense sound design.
Hi, I just want to drag and drop my own (non-musical, more noise / real environment samples like a "driller"!) samples into a sampler without spending too much time adjusting modulation connections, sources and amounts. For example I downloaded the free Korn, this instantly changes the sound of my samples. But on my system…
-
Octatrack Style Morph Between musical tracks?
Hello there folks, anyone here have a octatrack? When you switch between tracks it literally morphs between songs, the same processed is used with its mixer. Is sound amazing when it does that, I dont have one anymore to listen to but that morphing effect is not really mixing, it is like it slows down or speeds up the…
-
Does Flesh work properly? I'm getting confusing parameter changes
I'm using the Reaktor patch, Flesh. It allows you to specify harmonies and assign them to MIDI notes. When I press a single note that should trigger a chord (with it's corresponding settings), it automatically changes the root values within mono and poly. To my understanding the Root value should only change of the…
-
Reaktor synths december 2025 updates. What's new ? Any issues ? What's NICNT ?
I noticed there are plenty of new updates for Reaktor synths, dated beginning of december 2025. But the release notes are not updated. I only noticed that for some synth it says "NICNT file for optimized Native Access experience", so I guess this is what all these updates are about. Any infos about that ? Any issues…
-
Advanced Guide: Native Access installation problems and how to fix them manually
IMPORTANT NOTE: This guide is for experienced users only and only for Windows! Hello dear members :-) I decided to make this guide in order to help, at least the experienced users, fix Native Access installation issues, until our dear developers find (finally) a way to deal with them. This guide is for two Reaktor…
-
Why isn't Aerobic visible in the stacked macro?
I'm trying to build an ensemble that allows me to have all (well most) of the factory grooveboxes available, toggled on and off by midi keys. I've got the individual grooveboxes modified to work correctly, allowing them to operate either in auto mode (the way they work out of the box, producing sound whenever the playhead…
-
Upgraded Reaktor from 5 to 6, AAX plugin not showing up in Pro Tools
I've had Reaktor 5 for a long time (from a very old Komplete bundle), but I decided with the sale to upgrade it to Reaktor 6. I bought the upgrade, opened Native Access, and it installed 'Reaktor 6 Application'. If I look in my Plug-Ins folder for Avid, 'Reaktor 6.aaxplugin' is there, right about the 'Reaktor5.aaxplugin'…
-
Modyfing Meta Physical Function to make Automation recording mappable
hi everyone, I’m trying to modify metaphysical function to make the automation recording process mappable and control it completely from a midi controller. I’m not very experienced in patching in reaktor by myself, and would need some help here… tried to get to my goal with AI but that didn’t work. Can someone help me…
-
Why doesn't midi gate work in Krypt?
I've been working on modifying the factory grooveboxes so I can control whether and when they play based on midi notes. I got all of them working except krypt and krypt apparat. When I paste in the code to control the audio output based on the midi input, the midi gate control always returns 0. I checked that the…
-
Need help with the Snap Value module.
I trying to store a set of random values using the "Snap Value". It does work but it doesn't change the output when a new value is input to the module. I created a triggered event with the button which does latch a random number but it does not pass thru the snap value module. My guess the snap value won't pass incoming…
-
Stick Position : realistic drum sounds wiht levels of drum modes driven by the stick hit position
Hello On real drums the sound of the drum change with where you hit the drum skin. But on public information there is nothing , as far i know, that says how each modes of the drum evolves with the hit position. And after some research based on some pictures of the modes, and a map of real amplitudes of a drum skin , i have…
-
No more kernel panics with macOS Tahoe 26 (so far)
It seems that macOS Tahoe 26 has solved the kernel panic problems many users had with NI software. I’ve been using Reaktor on my M4 Pro MacBook Pro with macOS 26.0 daily for over a week now, and I haven’t had a crash yet. The same setup inevitably crashed macOS 15 after a few hours. I’m growing cautiously optimistic that…
-
How to Build a Reaktor Sampler with Polyphonic Playback, Real-Time Time-Stretching, and Retriggering
Hello everyone, I'm representing an electronic music artist who is a live act using Maschine Plus. He is struggling with a problem, Sampler unit in Maschine Plus has a very low quality real time streching, in order to bypass this he is using Audio unit. But the problem with Audio unit is, it doesn't have a retriggering…
-
Is this a joke?
I remember when I got Komplete 9 back in 2014 and one of my favorite things in it was the Reaktor engine, with all its weird synths, especially the Carbon 2. Today I realized it had been too long since I had played around with it, so I created a track with Reaktor 6 as the instrument, and I get this: And when I click on…
-
Why does a panel lamp that is set to continous mode go black when switching from A to B view.
Any ideas, if I set the panel lamp to non continous mode it works correctly but doesn't fade out like I wanted, it just switches between red and green. In continous mode it fades between red and green. It's in view A and if I switch from view B back to view A, it's black instead of Green. Is there some sort of…
-
Trying to reinstall Toybox for Reaktor
Hi! I just installed Reaktor on a new computer and I'm trying to reinstall Toybox (aka "Free Pack") from Toybox (https://www.toyboxaudio.com/products/toybox-user-blocks-free). Is anyone here using it? Where should I put it? I copied it to my "User Blocks" directory, as per the instructions, but Reaktor doesn't seem to see…
-
How to synchronise REAKTOR ?
Hi every one. This is my 1st question : I have a Korg D1600 Mk2 multitracks recorder on which i'm able to synchronise Cubase (the Korg being in slave motion) but i'm not able to synchronise REAKTOR (standalone/ NOT via Cubase nor any DAW) I have tried every set up in REAKTOR
-
How to reset the delays with an event from the delay time.
This macro resets the delay and clears all buffers without clicks. https://us.v-cdn.net/6034896/uploads/1D8LBI5Z4NQB/how-to-reset-a-delay-with-the-delay-time-macro.ens Hope it comes in handy. The gate shuts it off while the delay time only momentarily shuts it off while the delay changes, eliminating pitch changes when…
-
Enabling the wire debugging tool will also clock and latch a modulation macro's a input.
When you enable wire debugging, it also latches the current value at the a input of this modulation macro all by itself. This produces false wire readings which are confusing. Who else thinks it should be fixed. I feel we shouldn't have a debugger that interferes with the logic as in this example. Talking about the wire…
-
Reactor Some instruments don't work
There was an error rendering this rich post.
-
Are newer versions of M+ more or less CPU efficient? How is stability?
I've been using M+ since it was first released and I love it. Because I have read the complaints of others on here, and because I haven't been interested in most of the newer features, I haven't updated my M+ for a long time. It has been really stable and only crashed in use once, and I don't feel like it's missing…
-
Tone generator request
Looking for someone to build me a simple reaktor instrument that does the following: -Mono sinewave tone generator with midi CC-automatable frequency (20hz to 1khz) -midi CC-automatable secondary frequency fine tuning of +/- 20Hz Goal: to be able to smoothly glide between sine wave frequencies using midi CC Problem: All AU…
-
Just uploaded an update to Agent Orange 1.5
Just uploaded Agent Orange 1.5.4. A fresh new set of knobs and added new filters (Pro52, Notch, Butterworth2 LP4, LP6, LP8), a flanger, an invert switch & new waveforms for the ModLFO's (ramp and whitenoise). Also added a bunch of new snapshots. I'm very open to suggestions to lower the overall CPU consumption, which can…
-
Sampler Loop Waveform Display
Hi guys Is there any way to make the sampler loop waveform display not play continuously ? It only seems to see gate on. Best Matt ;-)
-
Komplete Kontrol presets inside Logic
So I'm in Logic, and I have a Reaktor user ensemble loaded into Komplete Kontrol (so I can use my KK S61's knobs to control it, rather than just Reaktor because the S61 knobs don't seem to work that way), and I wish to scroll through the presets tagged in the ensemble - in this case Agent Orange v1.5… but I CAN'T! Whenever…
-
Calculating how to attenuate inputs for multiple channels
OK, I'm starting to plan a project, that will be an Infiltrator-style stepped gate for multiple effects. I can't know in advance how many effects the user will choose. I want to mix together multiple channels so that the combined signal is the same as the original dry signal. How do I calculate what the levels should be,…
-
Trouble animating steps in sequencer
I'm a relative newbie at reaktor (though a seasoned programmer). I've been working on building a general-purpose 16-step sequencer, and I've got it mostly working. It can vary step length from 1 to 16, allows users to set levels with the mouse (mouse area & multi display), saves values (snap value array), working pretty…
-
Anyone use an X-Y surface controller with Massive X Play (or any other NI product with an X-Y pad)?
I purchased a ROLI Songmaker Kit, which comes with the ROLI Lightpad Block, Seaboard Block, and a Loop Block. I mainly purchased this to use the Lightpad as an X-Y controller. Is there a way setup Massive X so that the X-Y Play surface is controllable for a surface MIDI controller, like the ROLI Lightpad? There's also a…
-
Reaktor Feature Request
Can we please have the Reaktor Community built in to the Reaktor for fast access to the ens and latest release by users.? So we can download .ens and other files within Reaktor and it can stay organized according to the Reaktor Community within local drive. Thanks,
-
Where to put downloaded Instrument-Files
Hi Guys, I am new on Reaktor 6. I recently downloaded an Instrument-File. But where do I have to put this File? In "Documents/Native Instruments/Reaktor6Ensembles"? Or is there another Folder for Instruments? Thx for help, LIMCA
-
Probing in Structure View
how can i enable viewing the ongoing values of connecting lines (hoovering the pointer on the line) they way r5 did in r6?
-
HOW TO convert Bento Box LFO output to MIDI CC data and verify it
Hello everyone, I am coming to Reaktor 6 from a MAX / MSP background, and am trying to achieve the following: Use the Bento Box LFO to output MIDI CC data to control a parameter of Monark. I would also like the LFO waveform to reset when a specific key on a MIDI controller is pressed. I have read that multiplying the LFO…
-
Monark how to find assigned MIDI CC values
Hello eveyrone, I am using Monark within Reaktor 6 inside of ProTools. I'm struggling to find documentation online as to whether MIDI CC is pre-assigned to Monark parameters when loading it up in Reaktor 6? When doing this type of thing in ProTools, users need to manually allow / activate individual parameters to be…
-
Script language for Maschine or Reaktor? Lua, Python Rust?
Is there a way to address Maschine or Raktor using a script language?
-
My Reaktor 6 requires the installation of Native Access. But I've already done it.
I'm new to music production, and I'm currently installing plug-ins using vouchers from my hardware. Here is a video of my problem: https://drive.google.com/file/d/1zcp6X-5-C9bU67GHs0zsDfGeh-_4_1BZ/view?usp=drive_link Error window 1: Error window 2 Has anyone here encountered anything like this? I'd be glad if you could…
-
I can't install Reaktor libraries on external SSD
External SSD has all my Komplete 15 Ult. libraries but as far as Native Access is concerned, you have to reinstall the libraries and CANNOT connect them like Kontakt libraries. Nonetheless, I keep getting an error for the libraries. I have allowed all my NI instruments to install on main drive but libraries on external and…
-
Generalized "Player Layer" for Maschine+
Hello together. We need one layer only to shrink the selectable modules for the Maschine+. I call it the "Player" Layer. For Reaktor we need this soon, because if the M+ have a selection from Reaktor Moduls which run stable on the M+ hardware, will increase the selling of the M+ drasticly. One idea of a good solution for…