-
Reaktor factory patches only in Demo mode
Hello, I recently purchased the full version Reaktor 6… but the 19 factory patches (listed below) only open in Demo mode. Reaktor Blocks and Blocks wired are also only visible as Demo inside Native Access. The support is telling me that Reaktor Blocks and Blocks Wired were discontinued with the 6.3.1 update from Reaktor……
-
Delay compensation in Machines
But Native Instruments had promised to insert the delay compensation in Maschine 2 and 3 as soon as possible? It's been a year since the promise but I don't think there's any movement. Now with a new audio plugin it is essential to compensate for delay and all daw even the simplest ones have it. Force NI a little effort…
-
Machine is not opening up and stuck here.
Will not open past this point. The Machine Mk3 is showing busy. I tired to reinstall Machine 2 and it did not do anything. Even tried to open it up with Mk3 not connected. Any help will be greatly appreciated!
-
Maschine 2 Essentials - can't uninstall and doesn't show up?
I have this issue for a while now. Native Access wants to update something called "Maschine 2 Essentials". It lists me as having "Maschine 2 Essentials", "Maschine 2 Factory Library", and "Maschine 2 Selection" as installed. Every update fails because it claims it cannot uninstall the old version of "Maschine 2 Essentials"…
-
Disable the Accessibility Helper in Maschine - Solved
I don't know what happened, but all of a sudden in Maschine 2.18.4, the NI Accessibility Helper is active on my Maschine Studio and S61-Mk2. I have tried double pressing shift on the S61 and shift-play on the Maschine Studio, but she just keeps on chattering away. I can at least get it to say training mode on and off by…
-
Update to 3.0 with Maschine 2 HW?
Hi, can I upgrade to Maschine 3 software while still using the MK2 hardware controller? Thank You
-
Maschine 2 Plug Ins not loading from library bar but load manually.
Recently picking up Maschine after a hiatus and am struggling to load plugins from the Library bar. These load fine when adding manually. Rhe issue i'm faching and appears to be that when seleting an instrument say "Drum Lab" from the instrument library (Picture SS1) I then get an error message (Picture SS2) saying that i…
-
The direct connection of Kontakt in the Maschine software gone in 3.4 version
Hello! I've got Kontrol MK3 for Christmas! What a gift that is. I've been pretty happy with it so far - this thing is a solid unit and looks impressive when you open the box. However, there is one thing that is a bit disappointing. When Kontrol MK3 first launched, people said that you could open Kontakt inside the Maschine…
-
At some point will we get real time time stretching in the Sampler?
not even sure why I’m even asking? I mean live been using it since v1.xx Been faithful through the v3 software rewrite that was supposedly done so they could bring that feature. It has been the #1 request and probably the biggest reason users jump ship to other platforms yet here we are headed into 2026 and still have to…
-
Maschine MK2 not showing Maschine 2 in Native Access after Windows 11 reinstall — any help?
Hey everyone! 👋 I just upgraded my PC to Windows 11 and reinstalled Native Access, but now Maschine 2 is completely gone from my product list (only Maschine 3 shows up). I own a Maschine MK2 Black, which doesn’t work with Maschine 3, so I really need Maschine 2 to continue using my controller. I still have my hardware…
-
Future Audio Workshop - Notes
Notes from FutureAudioWorkshop This is a very clever plugin, and I think still on introductory pricing. instrument/Chord generator, and a bit more. Midi Out is already in beta after only a week of release, and coming soon. The Mapping here is a basic overview, because I think this needs NKS2 to function properly, with…
-
Can't save favourites in machine?
I just discovered that I can't save plugins in my software anymore? I just opened it and when I click on the star, it glows as it is being selected but nothing happens when I click , full disk access is on as usual, no major changes. I have heard that you can delete the favourites db file in shared but my god, I have…
-
The ConvertWithMoss
Hi, do you know this converter? It allows you to convert multisamples from various formats, even in Machines 2-3 (*.mxsnd).
-
How do I figure out the genres of my expansions?
Hey guys, random question maybe. I love my expansions however it can be hard to figure out which genres they are, in terms of browsing. Anyone have a way around this? I've been checking the NI website and searching for genres in the descriptions but I would love if there was a easier way to find a minimal tech house…
-
Best way to handle importing midi files to sound slots
I’m wanting to import midi files that contains only one track (drums) and have those midi notes get mapped to separate sound slots within a group. If I drop the midi file onto the group, Maschine will auto-split the midi data and put each row of midi notes onto its own sound slot which is what I want. The problem however…
-
Maschine browser issues and more...
Has anyone ever experienced their Maschine 2 software suddenly not showing all of the projects you've saved in the "All Projects" user view in the browser? I recently opened Maschine 2 on my MAC M1 Pro and for some strange reason, the browser will not show all 1500+ projects I saved over the years, only about 50 of them…
-
Surface pro 7 & Xreal & Maschine software experiences ....
I've been patiently waiting for a portable Windows solution to become affordable! i've just a few days ago purchased a second hand surface pro 7… to see how much milage i can get out of it, using maschine software and hardware combo's now im aware laptops being the typical, portable solution for windows… and they are quite…
-
Single Notes effecting
Hey Everyone Is it posible to load Plugin effects on Single Notes and if yes .How ✌️
-
I can't activate Maschine 2 .6.9 in Native Access.
Hi everyone, I have a Maschine MK3 installed on an HDD and everything was working fine until I installed an SSD in my laptop. But when I went to reinstall everything, I realised that I can't reactivate Maschine 2. I don't know if it's because my operating system is Windows 10 and apparently Native Instruments no longer…
-
Maschine 3 compatibility with Output Arcade
Hi All, So I don't feel alone anymore, are there any Arcade users (from Output) who are experiencing the same problem as me since version 3 of Maschine? Namely, it's no longer possible to add multiple instances of Arcade as a plugin (whether in VST or VST3). I opened a ticket several months ago about this (March 2025 -…
-
Liveplaying Swing with Maschine
How can I use Swing with Maschine Mikro MK3? The manual says it can be used when playing with Note repeat and live: https://www.native-instruments.com/ni-tech-manuals/maschine-mikro-mk3-manual/en/playing-on-the-controller.html#swing-on-the-note-repeat---arp-output BUT It doesn't work in my case. When pushing swing on the…
-
Why can't we put maschine 3 in fullscreen mode ?
Why is isn't there a fullscreen button anymore ? Second wy do we have less space to draw modulation now ?
-
NimBank Tool Release - Custom User Library
NimBank is an open source tool to custom the Maschine user library (modify name, add bank, sub-bank, ... ) You can find the v4 release here : https://denivel.blogspot.com/2023/01/nimbank-tool-update-40.html And a tutorial here : https://denivel.blogspot.com/2016/03/add-product-and-bank-to-your-own-librar.html Enjoy...
-
Play series for Maschine 🚫Play series for Mpc✅
Yet again, Native instruments has made even more of their play series expansions available to the mpc ecosystem. Maschine+ has yet to see a single play series made available to it after 5+ years. At this point i just laugh. Thankfully I got my Maschine+ secondhand at a dirt cheap price. But this has to feel like another…
-
Stock Compressor
Hello everyone, I’m trying to learn more about how the Maschine stock compressor works because I’d like to build something similar in Reaktor. I’ve noticed that many of the compressors available in the User Library don’t quite match the same controls or “feel,” and often there are glitches—especially with the attack…
-
How do I upgrade my old maschine 1.8 software to version 2.8?
Hi everyone, and sorry if this has been asked before. basically I have a Maschine mk2 that I bought over 10 years ago, and just recently decided to get back to my old hobby, but I can't seem to upgrade the 1.8 software to 2.8. I'm aware that discontinued because of the new MK3, but my MK2 controller wont be compatible with…
-
😤 Maschine 2.18.4 can't open NI Instrument (Massive could not be laoded) plugin
No way to load any NI instruments (Massive,Reaktor,Monarc,prism) on Maschine 2.18.14 (Intel x86). All installed trought Native Access (on default locations) Always get the same error when trying to load some NI instruments from browser. Fails with Massive, Reaktor, Monark VSTs can be loaded on right click from sound slot I…
-
Big automation issues in Maschine 3 / latest Maschine 2 update
Can I really be the only one having this issue since I can't find any post regarding this? After installing Maschine 3 and updating Maschine 2 to latest version some weeks ago, the automation seems to have broken quite badly. The mod wheel automation especially seems to be affected, no automation I draw with the pen tool…
-
raum, phasis, and replica not visible on maschine
I installed raum, phasis, and replika using native access, but they're not visible on Maschine. After trying several times, I discovered that the xml files for raum, phasis, and replika are not visible in the service center folder. Could this be the cause? Strangely, only these three plugins are having issues. Could you…
-
Maschine 2 and S25 - content scanned but not showing
I've loaded Maschine 2, because I want to use my S25 for more than just keys…… None of my content even shows up in the browser.
-
Maschine+ can it run on USB...
im curious about the maschine plus… as i was querying the chatGPT, and the response is i think questionable but i would love to get this clarified… so i can identify any shortcomings.. as some ardent Maschine+ users know… im very critical of the Maschine+ so my question… is Can the Maschine+ run on a USB cable… paired with…
-
Transfer of id and no mk2 control software download available
I bought a second hand maschine mk3 over a week ago and i have the forwarded email with the transfer id codes for komplete select too. I trasferred the komplete select no problem, but in order to transfer id the maschine mk 3 I need to download the mk2 maschine kontrol software before trasnsferring the mk3, but it dd not…
-
product serial number taken
I have a Question about a Mischine 2 i got from a pawn shop. but im trying to get it on my computer and its saying the product is already beimng used by another user. plz help me out. thanks and be blessed
-
Bank/Program Change Bug
Apologies if this is not the place to post a bug report, but I did not see a post type for bugs. The details and screenshots are too long for a post IMHO, so there is a pdf attached with all of the details. The basic issue is that bank and prog changes for external gear does not appear to function properly depending on the…
-
How to record multiple samples with scratches from different songs in Traktor?
hello all, I’m new to recording in Traktor and was looking for any information on how to set this up. I’m trying to record specific samples from different tracks, that I’ve generated stems for.i have muted everything except for the vocals in each stem. I’m trying to record this in a sequence (like notes on a timeline in…
-
Looping in Sample Editing
Hello everyone Although I have mixed and released several tracks using Maschine, I normally sample my portable grooveboxes and/or use short one-shots that I play and mix together. I recently switched to Mk3 and tried sampling a loop, cutting it up properly so it would loop well, all from the MK3 screens. Normally what I…
-
Why my serial number can't be found?
When I'm on Native Access my serial number can not be found. I've tried everything the site tells me to do but to no avail.
-
Native Instrument must seriously address the browser loading issue of NI and third-party plugins
Hello everyone, I see a large number of Maschine 2 and 3 customers complaining about the problem loading NI and third-party plugins from Maschine's browser. Although the plugins are present in the correct folder, the serious browser loading problem persists, with errors reported. They either fail to load or the inability…
-
Maschine 2 serial problem
hi! I have a maschine mk2 not used for the past 5 years. I try to install an activate maschine2 software , i add the serial write on the DVD and native access say to me it's ok. But maschine software isn't add on my "products and serial section" in my account. I try to install maschine with the legacy download, it open but…
-
Komplete Kontrol S-Series Mk2 vs Mk3 keyboard controllers for Maschine 3 dilemma
Hi! I plan to buy Maschine 3 software as DAW, Maschine Mk3 pad controller for playing drum VSTs and also Komplete Kontrol S61 Mk2 (used) or Mk3 for playing melodic VST instruments. The libraries I will use will mostly be Kontakt ones loaded in Komplete Kontrol software and then loaded into Maschine 3 software. Now, I've…
-
used Machine Mikro 2 serial is already registered
I bought the machine mikro from reverb knowing that it was used. I want to know how to get this fixed with native instruments so I can use it in my studio.
-
Maschine 3, Live Looping, clicks and pops
Hi guys! I have been preparing a Live Looping set in Maschine 3 using Idea View, i am on a Macbook running Sequoia, CPU usage is fine, mainly mixing loops and samples, only Stock Plugins, I do have set up 2 perform effects to add movement. Transition is set to re trigger, scene. The question is what your best advice to…
-
[Guide] Cubase + Maschine MIDI Routing & Integration
https://www.youtube.com/watch?v=_dV3G7wlGTY This guide will have as an example a simple pre-existing project with 3 groups: 🟧 A1 - Only One-Shot samples (Drums) 🟨 B2 - 0nly one Sound, an Instrument on Pad-1 (Bass) 🟩 C1 - 2 instruments, one on Pad-1 and another on Pad-2. (Keys) Here is the routed and fully integrated Cubase…
-
Bought from a second hand store and cannot find a way to get it registered again.
hello I recently bought a Mikro MK3 from a second hand store but my serial number is already registered. I’ve went through countless Reddit forums and all. It almost seems impossible to get it registered buying it second hand. Can anybody help me out on what I should I do.
-
Problems with Maschine 2 FX and VST Live - unknown plugin after project reload
Hi. Im on a MACbook and using VST Live 2.2 latest version. Loading Maschine 2 FX into an plugin slot for stacks inside of VST Live, it loads absolutely fine and I can load, play sounds and loops whiteout any problems. But after a project reload VST Live cannot find the plugin any more. As a result every sound, loop or…
-
Traktor S4 MK2 --> Steinberg UR22C
Hi Folks, some time ago I got Maschine and a SteinbergUR22C running. That's very OK … several connections possible —> latest choose the Yamaha Steinberg Asio (shared) ports … so that I can use also my NI Keyboard with Komplete CC…… Now gettin the Traktor running…. using the Traktor same way → Steinberg UR22C…
-
In need of Maschine 2 software license
Hey guys, I have just bought a maschine mk II in a great shape. Unfortunately the owner told me that he is not able to transfer the license to me. So, since Maschine 2 software is now deprecated and cannot be purchased from the NI website, I was wondering if anyone is willing to sell the license to me. I am also open to…
-
Piano Roll
Hi People, I was looking for the "Ableton midi note stretch", it means, if you write notes you can expand or reduce over the clip. Is it Maschine developed to do this? https://www.youtube.com/shorts/qpO3YpsFq4s
-
MacOS & ios users with maschine... YAM display... "yet another monitor" display
Maschine users who run their maschine application on macOS… might find the Yam display/air very useful you can run your MACOS computer completely headless, quite simple to setup… with ipad's or even an iphone if you wanted to… but it has some usefulness when using maschine or DAW's in general, given the touch aspect is…
-
Can't route VST outputs (XO) to separate channels in Maschine
Hi everyone, I'm trying to route the individual outputs from XO by XLN Audio to separate pads or mixer channels within the same group in Maschine. Here's my setup XO is loaded as a VST on one pad (e.g., Pad 1) in a group. Inside XO, each lane is routed to a different output (Out 1–8). Normally, in Maschine, I should be…