-
Maschine mikro m3 integration with Ableton 12
hi, i am trying to integrate my maschine mikro mk3 with ableton for live sets. I want to trigger the clips from maschine but in the options for midi controllers I can see my komplete a61 but not maschine. I also downloaded some third party midi remote scripts but they are for mk2 or other maschine variants but not for…
-
I cant register my MK3 that i purchased last year
Hi, It's been a while, but im trying to get my Maschine Mikro MK3 set up going again. I also have the mk2 but for the life of me I can't remember the email address I used to register the mk3 under, nor password. NI support site has me going around in many circles. Is there any way I can come into human contact with their…
-
Feature request: Pad Flip Mode (For left handed players)
I'm left handed and it is without a doubt a right-handed world 😭 For all of the preset drum kits that come with and can be purchased for Maschine, I have to go through each one and re-arrange the pad layout then save it. for most kits it's a simple case of swapping kick and snare with the hi hats. It makes the whole…
-
[v1.6.1] MASCHINE PLUS/MK3/MIKRO MK3 Ableton Live 11+ & 12.1+ MIDI Remote Script
MASCHINE PLUS, MK3 & MASCHINE MIKRO MK3 total integration with Ableton Live 11+ & 12.1+ (Windows & Mac OS) Introduction: This Control Surface/MIDI Remote Script, providing total integration for Ableton Live 11, 12.1 and up, was exclusively built for MASCHINE MIKRO MK3, back in March 2021, but compatibility and same…
-
Sincerest flattery? Alphatheta Slab
Anyone else thinking the Slab that has just been announced by Alphatheta (for Serato Studio) resembles our beloved Maschine Mikro?
-
Cannot unlink faders and pan
I cannot unlink the faders and pan controls! It's driving me nuts. I'm using the plugin inside of Pro Tools with a Mikro Mk3. I can select tracks one at a time but still the faders all move togther. I've restarted the Mikro and Pro Tools, reloaded the session etc and even tried without the micro connected. Still the damn…
-
Multiple velocity zones in MIDI mode
I use a Maschine in MIDI mode in combination with drum software. For one pad, I want to be able to trigger an open snare hit on lower velocities and a rimshots for higher velocities. Is there a way to have multiple velocity zones for one pad in MIDI mode with a Maschine? If so, which Maschine has this? I have a Mikro but…
-
Liveplaying Swing with Maschine
How can I use Swing with Maschine Mikro MK3? The manual says it can be used when playing with Note repeat and live: https://www.native-instruments.com/ni-tech-manuals/maschine-mikro-mk3-manual/en/playing-on-the-controller.html#swing-on-the-note-repeat---arp-output BUT It doesn't work in my case. When pushing swing on the…
-
Move the playhead with Mikro MK3
Hello, Why Native Instruments didn't implement the playhead movement with the Mikro MK3 hardware ? Is it possible to implement this functionality with, for example, SHIFT + ENCODER rotation to move the playhead forward or backward ? Unless I'm missing something to do this ?
-
Maschine Mikro MKIII with Traktor S2 MKIII
I want to use my Maschine Mikro MKIII with Traktor S2 MKIII Ideally like this: Traktor 4 Pro as the Master, using Traktor S2 MKIII as the sound card Maschine Mikro MKIII and Maschine Software synced to Traktor I would like to preview stuff in Machine on headphones, before they are sent to the main output. I also have…
-
Maschine 2 Essentials and Maschine software not showing up in Native Access.
I bought an used Maschine mikro mk3, the seller have already transferred the serial numbers and all the other stuff to me, I also registered all the serial number I got. But after downloaded the newest version of Native Access, I didn't found Maschine 2 Essentials and Maschine software in my Native Access. I already tried…
-
Share your no. 1 Maschine tips
Maschinerists, how do you use your gear? We've been sharing our own Maschine tips and tricks lately, but we all have different workflows and we want to hear from you. Whether it's the tried-and-true way to fatten up your drums or the best way to use modulation, share the hot tips for Maschine and Maschine+ you can't live…
-
Why do NI instruments not have an XY pad?
I am curious why none of NI's products have an XY pad on them given so many of their software products to have XY elements built into them. And key functionality and playability of these functions is lost when you don't have an XY pad. Products like Massive X Player, which is, essentially, entirely build around an XY pad…
-
New User Unable to use Kontakt 8 with Maschine 3
I'm new to this and I am trying to set up a group that uses Kontakt 8 with Piano Uno loaded. I have a drum track recorded and want to add a simple piano pattern. I really just wanted to record a pattern with a Piano Uno sound controlled by Micro Mk3. When I set it up I can click on the Kontakt 8 keyboard and I see the…
-
Bought from a second hand store and cannot find a way to get it registered again.
hello I recently bought a Mikro MK3 from a second hand store but my serial number is already registered. I’ve went through countless Reddit forums and all. It almost seems impossible to get it registered buying it second hand. Can anybody help me out on what I should I do.
-
maschine mikro mk3 - playback, patterns, waveforms
a couple of questions…. if i have multiple patterns in a group, can i play them back concurrently? Also, is there a way of seeing the waveforms of all the patterns from different groups together during playback, as in a DAW? Aaand, if i have the maschine routed into Reaper, can I play a pattern in the maschine software and…
-
Maschine 3.0 does not show up in Access
When my N.I. Mikro MK3 arrived, I followed the directions per the card insert...and connected it to a Dell Latitude 3500. I also have a FLX4 Controller connected to the Dell 3500, but not at the same time as the Mikro MK3 is connected. This MK3 to me, is complicated; it has me confused most of the time. But I was able to…
-
Can't drag and drop/import in sounds from PC files directly to MASCHINE 3
I've been using MASCHINE 3 for a while now and wasn't having technical issues that reopening or doing a reinstallation couldn't solve, lately i haven't been able to drag and drop (import in) sounds from my pc folders into pads unless it's through the libraries, which also requires me to rescan every time I add in new…
-
Remix deck mapping for Maschine Mikro mk3
I'm a beginner in Traktor. Is it exist a working mapping for Maschine Mikro mk3 for use it as a controller for remix decks in Traktor pro4?
-
Is it still possible to get the Full Maschine Library (Maschine 2)?
Hi! Before Maschine 3 arrived, Maschine Micro Mk3 users had an option to purchase the full maschine library, so they could have the same material than the Maschine Mk3 users: https://web.archive.org/web/20230325163049/https://www.native-instruments.com/en/products/maschine/maschine-accessories/upgrade-your-library/ I would…
-
NI Controller Editor display cut off after a random amount of time
I have a Maschine Mikro MK3 connected to a Windows 10 Pro machine. When I open Controller Editor, it opens normally and I keep the window minimized, but after a while if I restore the window it only displays a portion of the left side of the window. If I exit and restart the program, it appears normally. A reinstallation…
-
Sample repetition without overlapping
Hi guys, I recently got gifted a Maschine Mirko MK3, and I'm trying to flip some vocal samples. I created a group of samples, but I cannot understand how to repeat a sample without a sound overlapping. I would love to share an example video, but I can't add links in my discussion. Does anyone know how to do it? I'm using…
-
Anybody bought second hand units and received user and password?
Hi! I'm thinking about purchasing a second hand Maschine Mikro Mk3. My friends have Maschine Mk3 with the v2 of the software, and I would like to have this for now (I know I can purchase the rest of the samples and instruments apart to get the same with Mikro than with the normal version). However, I'm sure that most of…
-
Way can't I see Machine SW in Native Access after adding a serial number?
Hi. I bought a Machine Micro MK3 controller that was shown as B-Stock on Reverb. I created an account at native instruments.com, downloaded Native Access for Mac silicon, added my serial number and see it in my account properly. In the Native access library I only see the Kontact/Reaktor Player apps and Controller Editor…
-
Maschine MK3 Mikro user chords
Hi! Other than creating a json file, is Mikro MK3 capable of creating user chord sets? Maschine 3.11
-
Is it possible to hybrid live Traktor X1 mk3 and Maschine Mikro mk3?
Hi! I want to use Traktor X1 mk3 and Maschine Mikro mk3 for hybrid live. I'm using Windows. I made pref for both controllers the same audio (ASIO4ALL) and enabled LINK in both Traktor pro4 and Maschine 2. I can see that the link is ok because the tempo changes on both devices. But I can only hear X1, Mikro is silent. What…
-
maschine 2
My download isn't processing
-
Syncing Traktor and Maschine for live performance
Hello, I am trying to figure out how to use my Maschine Mikro Mk3 with Traktor for live performance reasons. All the videos online are quite old and the settings interface seems to have changed. Thank you for any help. -Jake
-
maschine mikro m3 not working no mattter what i do
i want to use maschine mikro 3 , every time i plug it into my macbook it flashes for one second and then nothing. It doesnnt come up with anything . I have maschine 2 installed. im using mac os 10.13 high sierra . I have used 4 different usbs and all of them have the same result.It doesnt recognise the hardware in maschine…
-
Cant access old account to transfer license
Hey, I have a Maschine Mikro from a few years ago and am trying to register it to my current account. The problem is that it is registered to my old email and native instruments account which I don't have access to anymore. It seems I have to transfer the license but I can't do that when I can't get into my account at all.…
-
I want to start another useless Nerd debate.
I don’t know if anyone remembers, but a while ago, I started a 'pointless' discussion just to hear other enthusiasts’ opinions. Today, for the same reason, I’m opening another equally 'pointless' discussion haha. This time, the question is: What do hardware devices actually do better than a digital platform? 'Warmer' is…
-
Mikro MK3 won't install in my new computer.
I looked around and did not find my exact issue or anything that worked for me. I apologize if I have placed this in the wrong area. I tried the auto-chat and could not get an email to Native Instruments support. The AI asked me some tech questions and may have sent that in. I don't know, it never acknowledged that it did.…
-
Maschine Mikro Mk3 Ableton template?
Does anyone know if Mashine Mikro Mk3 template/remote script is to be released soon? Maschine Mk3 is already released, does it works in mikro too?
-
Which Komplete expansion packs work with Maschine Mikro MK3?
Mainly I want to find out if Maschine will load the India expansion pack for Indian percussion instruments like tabla, dhol etc. from the India Expansion pack. They did show up in the Maschine software but I would like to know if the pads will map to the percussion sounds of the instrument selected. In general how do I…
-
Strange Behavior of 4x4 Maschine Controllers After Update 3.1
Hello Maschine heads, 😉 I'm experiencing strange behavior with 4x4 Maschine controllers after the latest update (latest Sequoia, M1 base MacBook Air). Everything works fine when the Mikro Mk3 and Jam are connected. However, when I try to create my own user chords (BTW, it seems that the Mikro Mk3 can only access pre-made…
-
Maschine 2 AND Machine 3 Software Running on the same computer?
The title pretty much says it. Currently I have both Traktor 3 and Traktor 4 installed on my Macs. Will I be able to install the updated Maschine 3 software while keeping the existing 2 installation of 2.18.4 or will 3 replace that installation. If it replaces it, at the current time I have no reason to upgrade until I see…
-
Control Setup Issues on Logic Pro 11 with Maschine Mikro Mk3 & Komplete Kontrol M-32
Hi there! Hope you´re doing well. I´ve been trying to setup my controllers (MM Mk3 & KK M-32) to Logic and only they keys and the pads seem to work. The Buttons aren´t automatically assigned. I´ve downloaded the latest firmware (2020) for both devices and even though I used Rosetta to open the Update Application, they…
-
Second-hand machine micro mk3
hi I emailed customer service around 12 hours ago. I don’t know how long it takes to get a response if anyone knows. But I bought a used machine micro mk3 on guitar center not knowing about the software I needed to download for it to be useable. I wanted to use this with fl studio. Is there any way for me to do that?
-
Edit copied pattern changes original pattern?
Hi, I'm new to Maschine (Mikro). I recorded a pattern in my drums group. I duplicated the pattern within the drum group in order to modify it for use in a different scene. Unfortunately all changes I make in the copied pattern change the original pattern as well. Thanks for advice how to avoid this behaviour.
-
X1 Mk3 + Maschine Mikro mk3 Traktor 4.1 function confirm
Can someone just quickly confirm: The X1 MK3 doesn't have a pre-loaded function to switch between decks, for full 4-deck FX, browser, and hotcue (AB, AC… to CD, DA…) without global reset The Maschine Mikro mk3 doesn't have a pre-mapped Controller Manager load-out for 2 remix decks (manual trigger deck and step sequencer…
-
No sound in midi mode
Hi all, I've had my Micro MK3 for a month now and I've searched through so many YouTube videos and threads in this community and others for answers but I still cannot get the sound to work in MIDI mode. I use the latest version of Logic Pro 11 and have updated the firmware on the device. I am able to play and hear sounds…
-
Maschine Mikro Setup: Factory Sounds not showing on Native Access app.
I just got the Maschine Mikro Mk3 and downloaded the latest version of Native Access. I was able to download the Maschine 2 Essentials software but the Maschine Factory Sounds download option does not show up on Native Access. I reinstalled the NA app and Maschine 2 Essentials but the issue persists. I have registered my…
-
How do I setup a microphone on Maschine Mikro Mk3?
Hi,I'm new to Maschine Mikro and want to know how to setup a microphone,so that I can use all the awesome FX in Maschine for vocals. I'm using a Behringer Xenyx Q1204USB Mixer and a TAKSTAR DM201 DYNAMIC MICROPHONE. Running windows 11.
-
Maschine Software won't show up after Hardware registration
Hello, I bought Maschine MIKRO MK3 and registered the hardware in NA. The instructions says that the software serial should show up in NA after registration of the hardware and I've refreshed NA several times now. So far only Massive, Monark and Prism show up but the MASCHINE software not. How can I resolve this issue?
-
Maschine sound expansions for POP/Rock/Funk music
Hello community, I would like to precise that I'm a complete beginner in Maschine software and in music production in general. Considering that I'm try learning finger drumming, recently I bought a Maschine Mikro MK3 mainly for the famous quality of their Pads ignoring the fact that the system is a lot more than this. So,…
-
Issues with Maschine 2 Plug-In and Maschine Mikro MK3 in Logic Pro
Hi there, I'm experiencing an issue with the Maschine 2 Plug-In in Logic Pro and the Maschine Mikro MK3, which I haven't been able to resolve yet. In my project, I've set up a bussing system to route each pad to a separate track (similar to the tutorial I watched - https://www.youtube.com/watch?v=-e9kAilOzOU&t=1s).…
-
Slice Option Missing from Maschine2 UI
I'm following a video tutorial (image on the right) and when I click the Sample Edit button, I get no slice options (image on the left). Any reason why? Thanks!
-
i have registered the serial of my maschine but i don't see the software in native access
I bought the mikro mk3 machine and I registered the serial number on native access and so far everything is ok. In my profile among the serial numbers compare that of the machine but in native access the software does not come out
-
Clips can't move free from grid in Maschine 3.0 with Mikro Mk3？
Thank you for reading! I recently started using Maschine 3.0 with the Maschine Mikro MK3. I watched a video explaining how to make sweeps and risers with Maschine, and it introduced a shortcut for freeing a Clip's position from the grid. The video demonstrated pressing SHIFT + FOLLOW + PAD16 on the Maschine MK3. I'd like…
-
MY Mikro is not recognized?
I'm trying to setup a mikro maschine, but even after installing maschine 3 the software can't recognize my hardware, any recommendations ?