-
Swiss Army Chord Pack - DOWNLOAD LINK
free download here
-
the link button is missing
hey everyone i try to connect traktor pro 3 with the maschine software over the link function and in traktor pro 3 it is missing a few months ago or so i had it all running through this function and now its complete gone… the option in the settings is still there but the button dont show up i want to use the maschine as an…
-
Any new Maschine hardware coming this year?
Sorry if this is off topic, but I'm curious if there might be new Maschine hardware coming? Seems quite awhile since a new unit has been seen. Peace.
-
How to stop Maschine3 software from sending the scene to the hardware while I audition
Hello, First post here. Forgive me if I am posting in the wrong section. I must be missing something here as Maschine 2 (Software) does not do this. I have installed Maschine 3 software. When I select groups and click on a kit to hear the audition, Maschine 3 immediately loads the scene and sends to the hardware and…
-
Maschine 3 visual lag. Why is this happening?
Hi everyone, I recently purchased the Maschine MK3 hardware and the Maschine 3 software and noticed that there is a huge visual lag of the cursor while recording, which messes up all visual cues while recording. This is without any instruments loaded, hardware connected directly to the PC, CPU usage @1%, Memory @ 29% and…
-
Nagivation to Pitch/ Envelope and Reverse
Hello Experts! I've been trying to follow the video tutorial for the MK3 and can't display the same settings to show Pitch/ Gate | Tune | Start | Reserve | Type. Under Sound, it instead shows Playback | Mode | Tune | Pitchbend on left screen and Audio Engine Source and Length on right screen. I've looked at the manual and…
-
Piano Roll
Hi People, I was looking for the "Ableton midi note stretch", it means, if you write notes you can expand or reduce over the clip. Is it Maschine developed to do this? https://www.youtube.com/shorts/qpO3YpsFq4s
-
[v1.6.1] MASCHINE PLUS/MK3/MIKRO MK3 Ableton Live 11+ & 12.1+ MIDI Remote Script
MASCHINE PLUS, MK3 & MASCHINE MIKRO MK3 total integration with Ableton Live 11+ & 12.1+ (Windows & Mac OS) Introduction: This Control Surface/MIDI Remote Script, providing total integration for Ableton Live 11, 12.1 and up, was exclusively built for MASCHINE MIKRO MK3, back in March 2021, but compatibility and same…
-
Is it possible to import Maschine 2 library to Maschine 3?
I have a lot of expansionsnd such in Maschine 2. In my Maschine 3 software there is nothing except one sound. Can I add my library to the new Maschine software?
-
Why is there no special offer for hardware for Komplete Ultimate+ Customers?
I wonder why I never saw any offers for very good customers of NI Software Products, like "Komplete users" are. It its only the other way round with e.g.: Summer sale: Get additional free software with a hardware deal. Is there no support or benefit for us reliable NI users?
-
Performance issues with Maschine+ and a small 3d-party library + questions
Hello, I just received a brand new Maschine+ and tried to play a 3d-party Kontakt library, but having issues with high CPU usage (70+ %) and audio drop-outs even at low polyphony - 2-3 notes played together. At higher polyphony it might clog the CPU totally. The library in question is "Deepflight 2" - sampled best Roland…
-
Can't route VST outputs (XO) to separate channels in Maschine
Hi everyone, I'm trying to route the individual outputs from XO by XLN Audio to separate pads or mixer channels within the same group in Maschine. Here's my setup XO is loaded as a VST on one pad (e.g., Pad 1) in a group. Inside XO, each lane is routed to a different output (Out 1–8). Normally, in Maschine, I should be…
-
Plugin editor window showing a small part of plugin
Hi I just got around to upgrading to Maschine 3 software. Everything is installed OK although I did notice that many plugins, despite showing in scan and manager, as 3 install took Maschine 2 settings, had an exclamation mark next to them. This disappeared when I reselected the plugin through the right-click menus on each…
-
third party plug-ins and vendors not showing in Maschine hardware
I can see the variety of fx plugins like soundtoys and fabfilters and sonic acedemy inside the GUI in the software but not on the maschine hardware itself. When looking at my Maschine hardware, under instruments it just says All Categories. There used to be a selection for vendors too. I can’t get any answers that have…
-
Used MK3 no serial
so i just got a used MK3 with no serial number on the back of it im left on a production and preformance system screen any chance anybody knows of anything i can do
-
Multiple CC signals from external devices and CC values jump
I used a plugin called "Swam" on the Maschine 2 software. When CC11 and CC1 or pitch bend are operated simultaneously from an external device, the CC value jumps. I don't think there's a problem with the external device because I can run it simultaneously with another DAW without any problems. Am I forgetting to configure…
-
software limits
I don't understand, I'm new with the maschine, and I'm finding very important limits in the software. I hope I misunderstood, but I don't think so. How is it possible that you can write various patterns in every group of every scene, but you can use only one pattern for every group of a scene? And how is it possible that…
-
How do i use the Multi FX?
I just bought the PULSE WERK expansion and it has Multi FX's like Buss Slam, Drum Pump, Gate Vader & Drunk CPU. I would like to know how to apply it in the track. Thank You
-
Massive Prism Monark not loading in Maschine
Hello, I recently purchased a Maschine MK3 and I am having trouble running the following plugins with it on my MacBook Air (M2 chip, macOS 15.6 Beta): Massive Prism Monark The plugins either fail to load or show errors when I try to use them inside Maschine. I have installed everything through Native Access, and my…
-
Accessing Settings on Maschine
maybe someone knows the answer to this - I'd be very grateful :) trying to access settings on Maschine mk3. I can press settings on the device, I see it on the display and I can see the different sections. but I can't select btw the sections. encoder not responding. any idea why that is?