Output Routing (logic / ProTools)

Unity of Noise

Curious if anyone knows a work around for routing groups to muiltiple outputs into a DAW (i.e. Logic/ProTools) that would allow me to go beyond the 16 main outs.
Scenerio:
Created a song in Maschine and I have 5 groups in said song. all scenes / song structure is done etc.
I can Route the 16 pads on Group 1 and record them, thats not the problem. The problem occurs when I want to record multiple groups out simultaneously into logic. Im out of outputs on the Maschine Software.
I would prefer to be able to just hit play on my song and let my DAW record what I did as audio… that way I my performance down and can thus go about my mixing process.
anyone Know a workaround?

Unity of Noise

Found a bit of a work around but i'm still limited to 16 channels.

Group 1 (Drums) - go though each Patter you have and route ONLY the drums you are using to outputs 1 to whatever. for me this was 10 channels

Group 2 (Drums 2) - Do the same thing again on the next set of channels (for me this was 2 more so channels 11 and 12) witch left me with 4 open outputs

Group 3 (bass) - route the GROUP output to 13

Group 4 (keys) - Group output to 15

Group 4 (FX sounds) - Group 16

So as you can see if you are using a ton of stuff on your drum group it will hinder your outputs but if you are like me and tend to only use about 8-10 of the pads this will work.
it would be great if NI added additional soft outputs on Maschine in order to make this easier.