-
Escalation Required: Purchased Traktor Pro 3 License Missing From Account Despite Valid Invoice
Hi everyone, I’m hoping someone from NI or the community can help escalate this, as I seem to be stuck in an AI customer support loop without any actual resolution. Situation: My previous MacBook was stolen I now have a new MacBook Air and am trying to reinstall Traktor for my Traktor Kontrol S2 I purchased Traktor Pro 3…
-
Software Transfere
Hey Guys, i borrrowed a Traktor Kontrol s3 from my friend and bought the traktor play 4 but i didnt know that you coudnt link it with another account. So now he gave me his native instruments account but he doesnt have traktor play 4 on it. thats why i tried to transfere my licence over to his account but it sayd i coudnt…
-
X1MK3: Community Performance MOD (qml coding)
Latest (V.13): Scrolling Titles, Custom Mixer, Beatcounters, more Remix Deck controls, Stem/Remix Deck support (Superknobs), (optional) Browser Mode, expanded custom setup, screen feedback for every new feature, optional overmapping support (updated) for overlays. As has been suggested elsewhere, the new X1MK3 was in need…
-
Can One Kontrol X1 MK3 control 3 deck DVS?
Hi everyone! I was wondering if it is possible to control 3 deck DVS on one Kontrol X1 MK3?
-
Cannot Get Traktor S2 to Work With Any Software
Hi, I cannot get my Traktor S2 mk1 to connect to either Traktor software or Virtual DJ pro. I've downloaded all the latest drivers, updates, firmware and nothing. The software recognises the hardware on both softwares but nothing will active when using controls on hardware. Any Ideas? I'm pulling my hair out. Thanks, Rich
-
TRAKTOR 4 vs Traktor 3.11.17
From where i was kicked out of pro 3, the update with 4 sucks. Snap cues; hot cues - align with the beatgrid rather than placement of my choice. As a turntablist this is essential. If there’s a way to turn 4 over to the team from 3.11.17 to implement the parameters those of us that use turntables would be happier.
-
Monitor Output not Working
Hi All, II have an ongoing problem with the monitor out from my version of tractor pro 3. The main output filters through to the monitor output, whether the headphone icon is selected or not. Testing this with a Komplete Audio 6, It shows signal at output 1/2 and 3/4 without the monitor being selected. If I leave the…
-
What who and why is there maleficent behavior happening
IIve been experiencing some problems during twitch streams. Like a rat on a wheel. During mix sets every so often the record will spin out of control. For no reason at all. Same track next day will have that happen at a different spot in the song. On top of that there is snap cue drift. Latency problems and a slew of other…
-
Windows 11 on ARM / Snapdragon X Elite compatibility with Traktor Pro
Hi everyone, I am currently using a Surface Pro 11 with Snapdragon X Elite, 16 GB RAM, running Windows 11 on ARM. I am trying to use it with Traktor Pro 3 and a Traktor Kontrol S5. I understand that Windows on ARM is not officially supported at the moment, but I would like to ask about the current situation and possible…
-
Standalone Traktor device like Maschine+
https://cdm.link/devious-pocket-standalone-simple-digital-vinyl-from-any-turntable/ https://www.indiegogo.com/en/projects/nap/devious-pocket Not the first. Maybe not the best approach. Open Source 99% (almost). What do you think guys?
-
New update erased everything
Thread Title: Traktor Pro 4.5 "Silent Update" reset my 7-year user profile and collection Hi everyone, I’m writing this to see if anyone else has experienced a "silent" or automatic update to Traktor Pro 4.5.0 that resulted in a total reset of user data. I have been a consistent Traktor user for 7 years, and I am very…
-
Why does my Traktor Pro 3 shut down with unknown error?
My Traktor Pro 3 (3.11.1) randomly shut down with no warning 4 times over the course of 2 nights this weekend whilst DJ’ing at weddings. I use the Traktor S4 MK3 Controller. It just randomly shuts down with an unknown error. I wasn’t able to grab the error message but I was wondering if you are aware of this issue or if…
-
Traktor S4 mk3 and Traktor Pro 3 software no output through either XLR or Booth
Hi All, Never had this problem before. Tried output via XLR and Booth= nothing into 2 x JBL EON 715s. Didn't output into a small BOSE AUX speaker either. Therefore= Software/driver problem? Not speakers. They worked via Bluettoth easily. All JBL Firmware is up to date. Headphone output is working. MAIN output only ever…
-
How do you set Z1 MK2 to Deck C/A or B/D?
Hi Traktor community. Hoping someone has tried this out I am trying the 2 Z1 for 4 deck control and only native options possible seems to be A/B or C/D, but this is not convenient for a four deck setup. Am I missing something?
-
Possible SOLUTION to known issue: TR-572 Blurry Waveform Bug (April 2026 Update)
Happy to update that since Jan 2026, I have not had a single crash during a live set. Equipment: Hardware: 2021 MacBook Pro M1 Max 14inch (32GB Ram, 1 TB HDD)- no external HDD plugged in 2x CDJ 3000, CDJ 2000NXS2, CDJ 2000NSX, CDJ 900NXS2, in HID mode plugged in via 2x USB C ports DJM A9, DJM DJM 900 NXS2 (MacBook plugged…
-
Komplete Audio 6 MK2 with Traktor pro 3
English: I'm having a problem with my Komplete Audio 6 sound card. It's always worked perfectly, but recently it's been giving me problems. The sound is distorted and mono. Is there a solution, or is it burned out? I use it for playing with Traktor, since Native Instruments no longer makes sound cards for Traktor. If you…
-
Mapping DDJ SX2 on Traktor 4
hej wonderful people. Please help me. Is there any excellent mapping file ?
-
S4 Mk3 problem: playback slowdown, freezing, crashing..
Hello everyone! I've been using an S4 Mk3 controller almost from the beginning, but unfortunately, it hasn't been working well with the Traktor software for some time now. Currently, I’m using version Pro v4.2.0 build 36. At illogical intervals, either playback slows down and the sound becomes distorted, or the sound…
-
MX4 Update? (with apologies to Eminem)
Dear NI, I wrote you, but you still ain't callin' I tried Rekordbox but it's rubbish and I rate it at the bottom You gave me a Windows update back in February, the one before was Autumn Is there a problem with HID or OneLibrary or somethin'? I know updates take time or they're buggy once we got 'em But anyways, **** it,…
-
Product Missing from Native Access
Hi Team, I got a new macbook and installed Native Access and Traktor pro 4. My Traktor Pro 4 is isted but only as a demo. I previously used Traktor Pro 2 and paid to upgrade to 3. I then purchased an S4 mk3 second hand and I was able to use Traktor 4 with this. I am no longer to access Traktor, only the demo version of 4.…
-
Why does my track squeal when I change the speed?
Any time I change the tempo on a track in my deck A (sync the tempo to deck B), I get a horrible screeching sound. If I have the key lock turned off (so key adjusts with speed), this screeching doesn't happen. This is only happening on one of my decks, and it's within the Traktor 3 LE software. I am currently…
-
K2 Modifier Issue (likely a simple fix)...help please.
Hi everyone, Apologies for what may likely be a daft question. I picked up 2x K2's today for the first time, and I'm just getting started building out my first custom mapping from scratch. I'm setting up my first Modifier, and I seem to be encountering an issue. I'm trying to assign the bottom right "Shift" button on the…
-
Please revert MixerFX to post crossfader
Since some version of Traktor 3 mixer fx have not work postfader for crossfader (only channel faders are postfader) when using controllers. Not sure why they removed it.. Would be nice to have it back or at least have an option in the settings
-
[Feature Request] Playlist Length Always in Minutes
Currently if the length of a playlist is longer than an hour, Traktor displays it as hours with decimals (e.g. 1.1 hours). As someone who regularly compiles and records radio shows in Traktor, that have to be a certain length this is quite annoying because with one decimal place it's quite inaccurate and also unintuitive.…
-
How to get sound from Traktor to speakers
I connect my traktor kontrol S2 to virtual DJ, everything plays well, but when I connect it to Traktor pro, I get sound from the headphones, but no sound in speakers, no matter how I configure. Can any one help?
-
Any plans to add Link Audio in Traktor?
This would be a live set power house, I already use Link in Traktor and Abelton but the ability to bring in individual channels via this new 'Link Audio' in traktor would be AMAZING! Hopefully Abelton is friendly with an api on this one because it is so cool…
-
[SOLVED] Traktor S2 MK3 crackling after 20–30 min caused by Ableton Live 12 ASIO conflict
Hey everyone, I wanted to share an issue I’ve been dealing with and how I finally solved it, in case it helps someone else. 🔧 Setup Laptop: Dell Inspiron 14 (i7-8565U) Controller: Traktor Kontrol S2 MK3 Software: Traktor Pro Recently installed: Ableton Live 12 ❗ Problem Everything worked perfectly at the beginning of the…
-
Sync Maschine with Traktor
Hi Everyone I like to Sync my Maschine with Traktor wich Traktor as Master and Maschine as Slave also I like to Use the Traktor Remix Decks to load Maschine Project. I tryd with Abelton Link but it dont works.I think I have to do the settings on mac first but how . Thanks for all incoming answers.
-
Traktor Kontrol S3 - Low Audio Output Problem
Good Day To whom it may concern I just received my Traktor Kontrol S3 DJ Controller this past Friday, Took it for a proper spin on Saturday & noticed that the Master Output is Incredibly Low, Including the Headphones Volume Level, it starts getting louder as close to turning the Volume All the way to It's Max. This is an…
-
Traktor Bridge : free export NML Playlist to RecordBox Database, xml, m3u or directly on USB stick
Traktor Bridge Hello all :) As a Traktor user and lover for over 20 years, I've often been confronted with having to play on CDJs. For me Traktor is far superior for organizing my music, but I was missing a tool to facilitate my DJ ecosystem and the reality of having to play on CDJ setups. I developed Traktor Bridge to…
-
Licensing Issue.
Hi. New to the Traktor ecosystem. I recently purchased a used S4 Mk3. Which the seller provided a license transfer code. Yet it is for the "Pro 4" upgrade. Not the original "Pro 3" that originally came with the S4 Mk3 upon it's release. 1. Will NI provide me with assistance in getting Pro 3 as it was originally with the…
-
Transfer token not valid
Hello, I bought a used tractor S2 MK3. The seller gave me a license transfer code, but when I log into my account, I get a "Transfer token not valid" error. How can I solve this problem?
-
Traktor S2 MK2, Problem cue to jog
Traktor S2 MK2: Deck jumps to -100 when pressing CUE (Already recalibrated) Hi everyone, I’m looking for some technical advice regarding my Traktor Kontrol S2 MK2. Lately, whenever I press the CUE or HOTCUE buttons with a bit of force, the track glitches or freezes for a split second. During this "glitch," the deck speed…
-
Traktor compatibility with Apple M4 chips & CDJ 3000
I recently bought an Apple MBP M4 Pro laptop. I noticed on the Traktor 4 System Requirements page that the M4 chips haven't been listed as compatible. Could that be the case? I usually connect directly to 2x Pioneer CDJ-3000s, and use the Pioneer Aggregator. Has anyone tested this set-up, and does it work ok?
-
How to get into QML Mod development
I originally posted this into the hardware forum. But now I realize this forum here would have been more appropriate: https://github.com/lsmith77/traktor-kontrol-qml This is a guide I generated by letting Claude AI review various mods and forum threads with some hand-holding to make it hopefully useful for both humans and…
-
Traktor - CDJ 3000X Compatibility when ?
This is urgent for many users, Please tell us if and when CDJ 3000X compatibility with traktor will be ready ? Thank you
-
Traktor pour Denon mc 4000
Hello, comment puis je modifier un mapping existant pour faire une fonction beatjump avec les bouton du sampler tout en annulant les fonctions primaire du sampler? Je voudrais avoir le bouton en haut à gauche qui fasse un beatjump de - 4 temps le bouton en haut à droite qui fasse un beatjump de + 4 temps, le bouton en bas…
-
Which is the right controller?
Hello Native Instruments friends. I have a fairly old MacBook with Catalina and Traktor Pro 3. It works perfectly for DJing with vinyl, but I wanted to get a controller. I recently bought a used one, the S2 MK2, and I had problems with it. The buttons worked perfectly, but it couldn't produce any sound through either the…
-
traktor 3 pro
hello everyone ı re-install my Macbook after a long time and reinstall every app that I had.But on my product list I can't see Traktor3 pro. On my product list is : traktor 2 traktor 3 update traktor 4 pro Yes I have Traktor 4 pro as well but I like to use traktor 3 on my gigs.Could anyone help me out ?Don't know how and…
-
Random clean exits in Traktor Pro 3 and 4 on Windows 11 – no crash logs
Hi, I’m experiencing random, unpredictable clean exits in Traktor Pro 3 and now also in Traktor Pro 4 on Windows 11. The application simply disappears during playback — no freeze, no error dialog, no “not responding”, and no crash entry in Reliability Monitor. System: Windows 11 (with latest updates to 25.2.2026) HP…
-
Laptop crashes with error message everytime i start it
Hello all, I had the following issue some weeks ago. I have installed Traktor Pro 4.4.1 and drivers dor Traktor S4 MK3 on my windows 11 Laptop. It used to work fine, but after some months, my Laptop started to crash with a black screen and the error message: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED: I used the asio driver. The…
-
CDJ3000X Alpha Data Compatible Traktor PRO ?
Hello, I would like to know when the CDJ 3000X will be compatible with Traktor Pro.
-
Welcome to Traktor mapping community!
Welcome to the Traktor MIDI Maps community. Here, you can ask any questions about mapping your controllers to Traktor and share your custom mapping files with fellow DJs. Your moderators Sûlherokhh and Stevan (me) will make sure that all of your questions are answered in this section. If you're in search of a specific 3rd…
-
Why can´t I activate Traktor Audio 6 and Komplete Audio 6 together in Asio4all?
Hi, I´m having trouble to use the ASIO4ALL driver together on Komplete Audio 6 and Traktor Audio 6; always when I try to activate an channel it deactivates the other one. So i can only use 1 entry and one output channel per interface. I´m trying for days to fix this have done everything I found in the web but it still…
-
A Wireless TouchScreen Stem Midi Controller for Traktor for under US$ 30,-!
As a Traktor user myself I'm proud to announce that the ATGR DJ Touch 1 (DJT1) now also works with our beloved DJ software. In this tutorial I demonstrate the available modules quickly and I show how to install the midi mappings. The DJT1 is a wireless MIDI controller featuring a full-color touchscreen, purpose-built for…
-
The channel faders move by themselves or jitter in the TRAKTOR software.
The faders move by themselves or jitter in the TRAKTOR software.
-
I heard about the MX4 in 2026, IS TRUE?
I read about the exit of a new 4 channel console for traktor (MX4) in 2026, and i would like to know if that is true, only cause i want to buy an S4 but if the MX4 comes out, i'll wait. Thanks. Greetings from Italy.
-
Audio 2 MK2 with TP3
Hi guys, i´m looking for a new Interface. My old Audio 2 isnt´t working with TP3, surprise surprise. Will the MK2 work with TP3? Any other suggestions? Z1 yeah i know, but still like the simplicity of the Audio 2. Thx
-
Ableton Link Audio as Track input source
Use the new Ableton Link Audio as Input Source would be an impressive leap forward for Traktor ecosystem. I wonder also mapping a stream selector/switcher to a midi CC and change in realtime what Ableton Audio Link channel is processed.
-
Time Code Xone 23C Traktor3, problem soundcard
Hi everyone, I configured my 23C using Allen Heath's guide to use it with timecode with vinyl. The problem is that Traktor only detects one timecode. The audio card detected is the XONE 23C Core, but as inputs or outputs I have 1 Front Left - 2 Front Right - 3 XONE23C - 4 XONE23C. Channels 1 and 3 Front don't work with…