-
Komplete M32 and Logic Audio 11.2 update: very slow volume knobs (KBDSW-8067)
Good morning, Can you help me? I bought Komplete M32 and Maschine MK3. Before the Logic Audio 11.2 update (added longer volume sliders), everything worked perfectly. But since this Logic Audio 11.2 update, Volume potentiometers only on Komplete M32 increase or decrease very slightly. The race is too small. (I didn't see a…
-
M32 is soon forgotten about.
I have a Komplete M32. It is detected by various DAW systems and standalone sounds. However, after a while, some packages are quicker than others, it is still detected as being attached, but is either not selectable as an input source, or no midi data is received from it. I tend to blame the M32 because I also have an…
-
M32 Not Working After New Logic Update
I recently updated Logic Pro and after doing so my M32 stopped integrating properly with Logic, so none of the transport controls seem to be working, and when I remove the device in the control surfaces setup and then unplug and plug the M32 (at which point Logic usually recognises it and adds it to the list) nothing…
-
Issue with Komplete Kontrol M32 Serial Number and Device Recognition
Dear Native Instruments Support, I recently purchased a Komplete Kontrol M32 secondhand. On my previous computer, it worked perfectly without requiring any additional driver installation. However, after switching to a new PC, the device is no longer recognized by the system. I attempted to install the necessary drivers via…
-
M32, life span ? thoughts anyone ?
Thinking of buying an M32 for my niece to take to school/music lessons etc. (She's 12 years old) The worry is how long before it's dropped like a brick from the current Eco system? S-MK1 has been dropped, writings on the wall for Mk2 and the M32 was released in 2019 so it will be 6 years old by next Music Messe.... I don't…
-
Komplete Kontrol M32 stuck in MIDI Mode after updating Mac to Sonoma 14.3.1 last night
My Komplete Kontrol M32 is stuck in MIDI Mode after updating Mac to Sonoma 14.3.1 last night. The device also isn't being recognized by the KKM Updater. Is anyone else having this issue? Literally spent hours and just cannot get it off. It just says "Template 1 midi mode" Guessing an update might be needed after this?
-
M32 and Komplete Kontrol in Logic Pro X
PLATFORM: Apple MBP M1 Pro/Sequoia 15.1.1 Logic Pro X 11.1 KOMPLETE KONTROL app v 3.33 Komplete Standard 15 After years of drooling over the ads, I took the plunge and bought Komplete 15 and an M32 keyboard. Having had an Arturia Minilab Mk 1, which took a PhD to set up in Logic, I was hoping the M32 would be plug and…
-
Komplete Kontrol m32 half the keys not working
i plugged in my komplete kontrol m32 keyboard and the first 16 keys are not working
-
M32 Factory Reset?
My M32 has started constantly sending MIDI CC data for a couple of it's knobs. I'm not sure if this is a hardware issue or something else so I want to do a Factory Reset on the device to see if this makes any difference. I can't find any information anywhere on how to do this (if indeed it's possible). Does anyone know -…
-
M32 transfer
Do anybody know any contact details to NI where a used M32 can be released from a former account ? I am REALLY tired of wasting time on useless robotarticles, so hopefully there are still humans in the supportteam somewhere … 😉 A wellknown tool as a oldschool e-mail to someone would be awesome Cheers
-
Kontrol M32 stuck at 'Firmware Update in Progress' screen upon boot
As the title says - It's just stuck there with that message on the LCD display. Doesn't show up as a midi device in the daw. Unplugged/replugged usb etc with shift key held down to no avail. Messed around with updating some native access stuff too, same error. Totally frustrating. Anyone know how to solve? Thanks
-
Komplete Kontrol A-series and M32 controllers Arp and Note Repeat info
Hi! Please someone who owns Komplete Kontrol A-series controller (A25, A49 or A61) or M32 one and Maschine software, let me know if simple note repeats are possible to generate when pressing ARP Edit button on one of those keyboards. I mean if this is possible with Kontakt instrument/library loaded into Komplete Kontrol…
-
Should Maschine Essentials be bundled with the M32?
Hi, I just bought an M32, which may be a mistake as I see it is almost a legacy product now, anyway, from reading marketing blurb and the setup guide I expected to get maschine essentials bundled with the software. I did not I got Monarch Scarbee KK Does anyone know if maschine essentials should be there? I can find no way…
-
Where to buy original USB Cable for m32?
I have lost my original cable for m32 and can't find any suitable cable on market. All of them too big for m32 usb port.
-
Didn't get any discount or Komplete select after brought M32
Well…I have to say that after 4 years, when I want to buy the Komplete 15 Standard right now, I suddenly found that I haven't get any discount of upgrade also there's no Komplete Select in my account! I brought the M32 on Allegro website, the dealer information is available on the NI website. unfortunately I can't find the…
-
Komplete Kontrol used a plugin on Logic X won't reopen Massive X.
Hello NI Team, When using logic X and Komplete Kontrol as a Plug-in, Massive won't reopen correctly, I'll be able to play the notes and hear the sounds with my m32 controller, but I'll no longer see the parameters move on the plug-in window. This is very frustrating when I want to experiment with the parameters after…
-
M32 MIDI controller is not being detected
Hello members I am a new user of NI and bought M32. I recently changed my system and after installation of Komplete Kontrol, my NI MIDI device M32 is not being detected. I tried to update the firmware but the patch again is not detecting my MIDI controller. What should I do ? Really appreciate support to get this problem…
-
Mapping knobs of KKM32 to Ableton Live stock devices'
I just bought a KKM32 and it works perfectly fine The knobs only control the track volume (and panning with shift), really useful but I wish I could map them to Ableton Live stock devices' knobs; I swear I've seen a video of that being possible, but it might have been a different NI keyboard? Let me know how I could do that
-
M32 how to setup custom midi to use as standalone controller
Hi folks :-) I want to setup custom midi on my m32 in order to use it as controller without komplete software. I tried the controller editor but the m32 is not listed as target and the Komplete Software has no option to persist the settings on the device. I wonder how to do it.. is it even possible or is one stuck with the…
-
M32 sleep mode?
Other than unplugging the USB cable, is there any way to put my M32 in sleep mode when not in use?
-
Access MIDI Assignment Editor / Update Firmware
I have an M32. When I click on the button in Komplete Kontrol to for the MIDI Assignment Editor it says I need to update the firmware, but the instruction I see online say that firmware updates should be detected automatically when you launch KK, but I don't get any updates. So how do I update my firmware? Or do I really…
-
M32 loses a MIDI port constantly on macos
Hi, I have a Komplete M32, and I regularly can't use it on my DAW (DAW isn't important, I tested it on Bitwig, Reaper, Cubase and Reason with same result). I lose a MIDI port and so the keyboard isn't usable anymore in DAWs, neither the keyboard, nor the controller (play/stop/record/…). If I add a track with a Komplete…
-
The difference between KOMPLETE KONTROL and KONTAKT 7
Hello, I'm new to the Native Instruments ecosystem and have a few questions: What is the difference between KOMPLETE KONTROL and KONTAKT 7? Does KONTAKT 7 support the KOMPLETE KONTROL M32 keyboard? If so, should I use it instead of KOMPLETE KONTROL? Thank you for your help!
-
Komplete Kontrol only working as a basic MIDI controller
I bought a Komplete Kontrol M32 keyboard and it connects to my computer but it only seems to be working in MIDI mode. The quick setup guide shows that you should be able to load up the Komplete Kontrol software and then press Browser on the hardware keyboard, but mine just says "Instance - No Instances" and it cannot…
-
No auto Mapping of my M32 knobs since the last KK update ?
After updating to the last Komplete Kontrol 3.3.0, I have no auto mapping of the knobs on Komplete Kontrol, and the Controller menu doesn't show my M32 anymore (visible but disabled). I rebooted my MacMini M2, but nothing changed. Reinstalling KK didn't change anything. Am I missing something ? All was working OTTB before…
-
M32 mixing in Maschine
I can't seem to find how to use the 8 knobs on the M32 to use as volume/pan control in Maschine software. The FAQ on Native Instruments website says it's possible. Am I missing something? https://www.native-instruments.com/en/products/komplete/keyboards/komplete-kontrol-m32/faq/
-
Velocity issues with Keyboard Komplete Kontrol M32
Hi, I'm experiencing velocity issues with my Komplete Kontrol M32 keyboard. The problem is that the velocity sensitivity is "biased" towards the extremes: if I play softly, the MIDI note velocity is very low (e.g., below 10), and if I play hard, the velocity easily exceeds 110. It seems like the keyboard's velocity range…
-
Scale mode/Guide Mode: Komplete Kontrol M32
I was messing around with the scale modes on the M32, but I realized there is a "Guide" mode which I am pretty sure is there for the Komplete keyboards with keys that light up, of which the M32 has none. Is there something I am missing? Is there a reason this mode is still on the M32 even with the lack of guide lights?
-
FL Studio - A-Series and M32
Hi. My name is Duwayne I created a script of the A-Series and the M32 works with FL Studio. It's called the Fruity NILA. By using the Native Instruments Host Integration protocol instead of the limited MIDI mode Native Instruments provides, the controller acts as if it was connected to Ableton or Logic Pro X. The Komplete…
-
Fruity NILA - integration for FL Studio with S-Series, A-Series and M-Series keyboards
FRUITY NILA provides support for the Native Instruments M-Series, the A-Series and the S-Series with FL STUDIO. By using the Native Instruments Host Integration protocol instead of the limited MIDI mode Native Instruments provides, the controller acts like as if it was connected to Ableton or Logic Pro X. The Komplete…
-
Can I download komplete 14 before package arrives?
I've read the Q&A but it doesn't make it clear if a download product can be accessed before the keyboard it is tied to gets delivered? I bought the Komplete Standard & M32 keyboard offer and I'm just wondering if I have to wait for the keyboard to arrive before I can use Komplete Standard or not.
-
Auto filler put 2 different shipping addresses on my order, is there a way to change it?
I ordered Komplete Standard & M32 keyboard and quickly realized that the shipping address mixes up 2 addresses in which I live. I submitted a ticket with no answer yet, and i'm scared that the package will get delivered to a new address (combination of the 2 addresses I put) before I can get any help. I know this was my…
-
M32 Octave up button doesn't work
Has anyone had trouble with the octave buttons? My octave down button works and is lit up. My octave up button is dim and doesn't work at all. Any ideas what is happening? I've tried reinstalling komplete control but makes no difference. All other knobs work.
-
Maschine2 Mikro/M32 integration Idea...
You lose some functionality when you downgrade from Maschine mk3 to mikro. If someone buys say an m32. You should allow for all the knobs on the m32 to control the volumes and pans on the maschine2 software. Even Ableton automatically allows the m32 to control their volumes & pans on their software when using the m32. My…
-
M32 Kontrol, no Ableton Live 12 control functionality
Good morning. I purchased a second-hand M32 controller. In Ableton Live 12, the controller is detected, but there is no control functionality. Your support resources and tips are also not helpful. There's no "Komplete Kontrol M DAW" function, and the keyboard doesn't work. What should I do in this situation?
-
Is there no way to see Brand/Sound Type/Character at the same time on Komplete Kontrol ver.3.0?
Hi, I've used Komplete Kontrol M32 for a year with Komplete Kontrol ver. 2.9 software. However last October Native Instruments did a worse upgrade to ver.3.0, since the way to browse was radically changed without concerning those old devices. In Kontrol ver.3.0, we choose sound following below steps, 1, select types…
-
Cubase / M32 keyboard midiremote file
Hi, sorry but I'm struggling - does anybody have a *.midi remote file for Cubase for the Native Instruments M32 keyboard please? Or is there a central download area for these things?
-
Komplete Kontrol M32 MIDI Remote surface for Cubase 12/13
Hello, I've created a MIDI remote surface for the M32 and Cubase 12/13 which you can find in the link below, with more details on its setup and functionality. It works complementary to the official NI's DAW implementation and offers a relatively quick way of assigning our knobs in MIDI mode, to various components exposed…
-
native instruments host integration agent documentation
Hi Does that host integration agent have documentation? Can we expand or use it? Whats my use case? I am using the M32 with FL Studio. I've tried using the default settings for FL Studio but it's very tedious to get things done. If Its possible to have some documentation about that API then I could make something that just…
-
M32 velocity sensitivity
What is up with the velocity/sensitivity on the M32 keyboard? Just playing it normally, like you would an actual piano, it is only sending like 20-50 velocity (out of 127). If you play really hard to the point the keys are getting noisy and your fingers hurt, it might go to 70-80. You have to literally pound it as hard as…
-
Can NI Kontrol M32 be mapped to Arturia Analog Lab
Hey I just ordered NI M32 and wonder if I will he able to map it to Arturia Analog Lab to both browse presets and control them using generic midi control setting (9 knobs + 9 faders)? I know there is a paid NKS version of Analog Lab presets, but I just want to understand if I can map it directly to Analog Lab Thanks
-
Navigate Komplete Kontrol with M32
Hello When I try to navigate the Komplete Kontrol software via the M32. If I select browser mode and start to navigate between instruments, loops, one shots etc.. Once we select a sound, how can we back out? It seems like I will select an instrument can here some sample sounds but if I would like to back up a step and…
-
M32 Issue - garbage characters on display in MIDI mode and 1.0.1 firmware version!
I have had this issue with 2 brand new M32 units (returned the 1st one assuming a HW issue). When I run the latest firmware update app (140 MAC), it indicates the app firmware version is 0.4.5 but my units both had 1.0.1 so the app does not think it needs to update. Is this correct? - i.e. is the latest M32 firmware 1.0.1…
-
N.I. products with use of Imagine !
Hear Imagine in action ! Other than the obvious use of NI products then the performer use either Touché or Touché SE , but I don't know the exact model of GrooveBox or Grid Controller that is used !
-
Hitting a wall with Maschine GPU Usage (Clipping, Glitches)
Hello! I'm in a bit of a bind with my Maschine Mk3 setup. In particular, my full setup now is: a Maschine MK3, Maschine Jam, and a Komplete M32. I recently added the Jam and was really excited to have this complete Native Instruments setup for some recording projects. Unfortunately, I'm getting popping, glitching, system…
-
How come the Komplete M32 switches me out of midi mode when I switch tracks in my daw.
I prefer to use the keyboard in Midi mode because I find Komplete Kontrol to be a slower workflow than just using my daw. What would be cool Is if you could keep it in track mode but assign the knobs to cc or smart controls. But there is no way to change them from their locked in volume and pan controls which are really…
-
M32 as a Midi Controller - trash?
I'm using Cubase and use the encoders as quick controls. Problem is if you do anything in Cubase (select a different track etc..) the M32 instantly jumps off Midi Control mode. Then I have to press the SHIFT+MIDI button combination again (which on top of this all has to be done with 2 hands..). This in practice renders the…
-
M32 Keyboard - slow reaction
Hi, I am trying to learn a few simple piano chords, I have installed a VST called 'The Grand' by DSK Music inside Cakewalk. When runing up a scale - the reaction of the keyboard I find a bit limp, and a bit odd, like you really have to strike some keys- but not others, and changing note too quick - such as in a scale, the…
-
m32 and Bitwig/DAW Settings
Please see attached. When configuring the MIDI OUTPUT sections of the m32, following the guide, the M32 MIDI OUTPUT should be selected in the bottom of the list. Strangely, doing this causes the first error image above. To fix this issue, selecting None does not work. Only by choosing an Arbritrary MIDI Output Port, does…
-
Can I play all 88 keys from a M32?
Is there a way to play all the available keys from a M32? Like a scroll key option pr sometimes similar? thank you