-
S61mk2 keyboard is recognized, but keys not sending MIDI
Hi people. My S61mk2 is not functioning correctly with my new Win11 system, after having worked perfectly for many years with my old Win7 system. I boot Komplete Kontrol stand-alone, which recognizes the keyboard. Under Controller it correctly says KK S61 mk2. In Preferences>MIDI, the KK DAW-1 boxes are ticked for Input…
-
Anyone else unable to login in to Native Access 2?
Hi all, Is anyone else unable to login into Native Access 2? Support only asks if I have rebooted, VPN, etc. I replied to them explaining I have rebooted numerous times, no VPN was in use. They haven't responded with a follow-up, and I was wondering if someone else may have solved this as I see there is a closed thread…
-
Maschine MK3 won't let me switch to the correct device in the audio interface
Hey yall, I'd really appreciate your help if you can. Thanks in advance. My Maschine MK3 was working fine on Saturday. Today, it wont let me switch to the correct device in the preferences (see attached photo) When I attempt to change it to the 'Maschine MK3 WDM Audio', the program freezes & then shuts down. I've tried…
-
Should Mixing Mode sound level be the same for Internal vs External?
Newbie here and not sure if I really have a problem. I learned I need to set preferences Mixing Mode to Internal for S4MK3 and also set output monitor to headphones left in order to get split headphone sound when using the headphone Cues. I couldnt get the split headphones cues to work using External mixing mode. When…
-
Minimum Requirements for Maschine mk2 on Windows (and suggestions)
Hey all! I've been on Maschine for years on Mac. I have a new Dell Inspiron 5570; is this compatible? Can you suggest a PC that "plays nicely" with Maschine mk2 [mikro]? Thank you!!😀
-
Maschine mk3 not recognized
Hi all, Would greatly appreciate input on a problem with a Maschine mk3 which seems not to be unique, but I cannot resolve it with the fixes listed here or on other forums: I recently bought a second hand Maschine mk3 and installed the Maschine software. However, when I start the Maschine it does not go past the display…
-
Concerns About Closure of Sounds.com and Compensation for Credits
Hello fellow music enthusiasts, I hope you’re all doing well. Today, I bring up an issue that has been bothering me recently: the unexpected shutdown of Sounds.com by Native Instruments. Like many of you, I’ve invested a significant amount into this platform, accumulating over 2000+ credits that I intended to use over time…
-
SSD formated on windows on mac does not mount on traktor.
Have you tested this yet? This weekend, I had a surprise. even the mac reading ntfs files and having access to them, traktor doesn't " mount" the hd within the software. I bought a software where it is possible to edit and mount hds coming from windows. and I can't load folders from this hd. Traktor just doesn't show up in…
-
CAN'T REGISTER MY NEW MASCHINE
Hi, I bought a new Maschine Mikro MK3 on Amazon but when I try to register de hardware serial on the Native Access it says that it has already been registered. So I wonder if someone can help with that. Already create a ticket on the support section but not been contacted yet. Any solution to that? I can use the Maschine…
-
Traktor Kontrol S2 MK1 + Traktor Pro 3 + Windows 11
Hi everyone Apologies if this has been asked already but I couldn't find the info I was after. As per the title, I want to know if I can use a Traktor Kontrol S2 MK1 + Traktor Pro 3 + Windows 11 If not, I am not fussed in downgrading my Windows version to 7/8 in order to be able to get Traktor 2 Pro from my registered…
-
How to "Enable" NKS for IK Multimedia Products
I have quite the library of SampleTank products, and I was REALLY hoping I could implement NI's NKS protocol to use its tight integration with my new S88 Kontroller. It hasn't arrived just yet, but I want to be able to hit the ground running. So, how do I integrate IK Multimedia into the NKS protocol? BTW, I'm using Win11,…
-
Komplete Kontrol won't update
I've disabled all anti-virus and firewall. Native Access finishes and says installion was successful and then the Update button lights up again. The program will run natively but is no longer recognized in Studio One. Running Windows 11 and latest version of all programs mentioned. All other updates installed fine. Any…
-
Kontakt 7.3.2 not appearing correctly
I have brand new computer, windows 11 Kontakt 7.3.2 which does not appear correctly it is like it is still Kontakt 6 but it is version 7, I have re-install it in Native Acces, I have followed the tutorials on NI website but still the same. My DAW is Cubase 12 Pro.
-
"you may not access the item" error while attempting to install native access 2 on windows 11
My specs: Windows 11 Home Processor: AMD Ryzen 7 5700U with Radeon Graphics 1.80 GHz Installed RAM: 16.0 GB (15.4 GB usable) Any ideas?
-
traktor s4 mk1 download on Windows 11
I have a Traktor S4 Mk1 that works perfectly. I recently bought a new laptop which runs on Windows 11. I've loaded the software but Native Access does not make provision to activate the software. can anyone please help. I still have the original installation disc.