-
Help! Kontral S mk3 firmware update failure- I’ve tried EVERYTHING
Hi everyone! To my utter dismay I cannot get the firmware to update on my Kontrol s61 Mk3 keyboard. I have a MacBook pro max m2. I’ve tried everything! turning off the device and attempting a new port ensuring that all software has “full access” ensuring that the correct programs are running in the background at start up I…
-
Error Firmware update mode Traktor S2 Mk3
Hello, My controller S2 MK3 Keep turning on (lights etc) then 2 sec turn off directly. I ve uploaded the latest version of traktor pro but still ... So I ve tried to upload the update mode of my firmware on my S2 Mk3 traktor but i keep getting this mesage : What should i do ? what is exactly a power cycle ? Thanks a lot…
-
S49 Firmware Update Failed, "Looks Like Something Went Wrong" Firmware 0.0.1
I have had this issue on TWO different Kontrol S49s. The initial firmware update ran for 4-5 hours. I power cycled the keyboard, for a firmware update taking 4-5 hours is absolutely ridiculous. The keyboard then booted into the recovery mode pictured above, and now the installed firmware shows as 0.0.1. I followed all the…
-
S88 Mk3 - Firmware Update Failure
Hi, all. Finally got my S88 Mk3 (after waiting 3 months) and the Firmware Update continually fails. I opened a support ticket, but can’t find access to the ticket on the NI site. It appears their ticket system is one-sided and meant only for NI’s information. Note: the reply email from NI support does not include a working…
-
No Power / Dark Screen after Firmware Update from Komplete Kontrol MK2 S88
Hello everyone, this is my first post and I am very desperate and appreciate your help! Yesterday during working with Logic Pro suddenly a message plopped out that I should upgrade my Firmware of Komplete Kontrol MK2. When I updated something crazy happened - a Link opened to update my Piano and during updating I think I…
-
[Feature Request] Komplete Mk2 keyboards mod wheel/pitch bend/touch strip MIDI channel control
As discussed here https://community.native-instruments.com/discussion/4897/midi-channel-for-pedal-and-wheels, the Mk2 Komplete Kontrol keyboards currently do not support configuring the Mod Wheel, Pitch Bend dial, and Touch Strip to send data on any MIDI channel other than 1, even though the keyboard itself can be switched…
-
Leds don't light up
I bought an old S49 MK1. While using Komplete Kontrol, the leds should help locate the key switches, and instead they stay white. I try to update the firmware with the firmware updater, but it says the S49 MK1 is at version 73 and its latest firmware update proposal is at version 69 ??? How is this possible ? Any link…
-
Firmware update progress bar?
I just finished updating to the latest firmware from 0.2.8 to 1.5.3 and although it took a bit over an hour it was successful. I would like to suggest adding in a progress bar to provide some state of progress during the elapsed time. Maybe some messaging within the Updater along the way to help with the long update times…
-
any news about machine plus updates? or i just have to sell it?
maschine plus crashes and lack of basically most of native instruments products really pissing me off. any chance that we'll get a firmare update this year? 0. stability: it's not possible that this thing crashes this often it makes really difficult to plan to use live 1. align machine version with the desktop one so i can…
-
KKS MK3 stuck at "Get latest update" - no firmware updater launching
Wow, what a bad start. Just received the MK3 today and after registering the device and loading the Hardware Connection Service, it just sits there saying "Get latest update". The link provided on the display is wrong. Launching Komplete Kontrol 3.0.1 does not see the device however it is powered on and lightens up. Tried…
-
Update Firmware for S88 mk2 ?
How and where update firmware s88 mk2 0.6.0? Thanks
-
S61MK3 firmware/driver issue
Good morning, My S61 mk3 keyboard gets stuck on the “welcome add your serial in native instrument” page Also, firmware update doesn't work. I have the impression that a driver is missing. the keyboard is not recognized. What to do? Thank you all
-
Standalone midi mode on Maschine MK2?
To control external gear and programs on IOS/android it would be nice that you can upload your midi mapping to your Maschine MK2. So you can use it without connecting it to an MAC or PC to load in the midimapping. Can this be done with a firmware update? Or is it allready possible?
-
Maschine MK2 Firmware
Is it possible (or do/should I need to) update the firmware on Maschine MK2? I see plenty of links for MK3 series, but not MK2... thx
-
Have you ever seen that? komplete kontrol mk2 s: Strange LCD issue after firmware update...
Hello, after updating recently my s61 mk2, I sudently had my 2 screens washed out. The dark part are now light grey, like a serious lack of contrast, it's very unconfortable, what ever the settings of the light from the setup I try. 🤨 I try to find a way to re install the firmware, but with no success. For infos : - It's…