-
[FIXED] Maschine 3.1 - Full screen broken with DPI scaling
Full screen mode is broken in Maschine 3.1 when Windows has DPI scaling on. Size of the displayed Maschine is inversely proportional to the scaling: 200% DPI scaling = Maschine taking 1/2 screen width and height, 300% scaling = 1/3 etc. Tested in Win11 24H2 26100.3476 EDIT: This is fixed in 3.2
-
Remix Deck Captures wrong sample length
Traktor 4.1.0 146 Kontrol F1 Remix Decks Samples are captured with too much at the end... why?
-
NTKDaemon constantly tries to install Helper Tool after each reboot
My NTKDaemon on my Sequoia Mac constantly tries to install Helper Tool after each reboot. This has been reported by others as well: https://community.native-instruments.com/discussion/26968/ntkdaemon-is-trying-to-install-a-new-helper-tool-everytime-i-start-my-mac…
-
Can't route VST outputs (XO) to separate channels in Maschine
Hi everyone, I'm trying to route the individual outputs from XO by XLN Audio to separate pads or mixer channels within the same group in Maschine. Here's my setup XO is loaded as a VST on one pad (e.g., Pad 1) in a group. Inside XO, each lane is routed to a different output (Out 1–8). Normally, in Maschine, I should be…
-
Massive X Update Missing
I seem to be running into an issue where Native Access (v. 3.18.1, the latest as of writing) is downloading and installing the correct Massive X 1.5 VST file, but the 1.4.4+48 file for its VST3. I have no idea how or why it is doing this; it seems (based on some semi-corrupted projects) that it hasn't always and there was…
-
X1 MK3 Hub bricks Traktor / dead hub after 11 months
Suddenly after year of use integrated hub totally bricks Traktor. Settings which was working till yesterday: - Macbook Pro (OS latest, T4 latest) connected (with UDG USBC-USBB Cable) to X1MK3 - Z1 MK2 connected (with NI cable) to powered X1MK3 hub - AUDIO 6 connected (with NI cable) to powered X1MK3 hub Now: - if is…
-
How do I fully remove Kontakt 6 on Windows 11? Just shows Repair
Hello, I do I fully remove Konakt 6, it just shows "Repair" every time. I don't want Kontakt 6 Player (I have full version of Kontakt 8). Reinstalling (which will get rid of "repair") and then uninstalling (bring backs "repair") does not work via Windows "Installed apps". NI Uninstall RegTool_64bit.exe doesn't get rid of…
-
FX Button vanished
Hello, I did a gig with Traktor 4 Pro ( 4.20.34 ) and the controllers X1 MK3 and Z1 MK2 when suddenly the FX controll button for the deck 1 vanished on the screen. I could not toggle with the controllers nor did I find any settings which could turn it on or off. I did reinstall Traktor 4 but it did not help. Any ideas,…
-
M32 Not Working After New Logic Update
I recently updated Logic Pro and after doing so my M32 stopped integrating properly with Logic, so none of the transport controls seem to be working, and when I remove the device in the control surfaces setup and then unplug and plug the M32 (at which point Logic usually recognises it and adds it to the list) nothing…
-
DJM-900 NXS (first gen) configuration with Traktor Pro 3/4
Hello everyone, I’m having trouble configuring my DJM-900 NXS (first generation) with Traktor Pro 3 and Traktor Pro 4. I’ve followed several video tutorials and online guides, but I can’t seem to get it working properly. Has anyone experienced similar issues or knows the correct steps to set this up? Any guidance, tips, or…
-
Why suddenly is Live input on decks when starting up traktor pro3?
Since pro4 hasbeen released I decided for awhile to hold off changing over but now out of the blue when I open traktor pro 3 on my S3 controller Deck A&B are showing Live input so I go into preferences and have to change Deck A&B manualyy to Track deck A&B every time I open up Traktor, methinks there is a bug, I've updated…
-
Plugins Disabling Keyboard & Mouse Input While Plugin Window Is Open (and Other Conditions)
This originally was going to be a post about this behavior happening with just one plugin, but now I've experienced it occur with two. My computer specs are on the bottom of this post. The first is Guitar Rig 7 in Ableton Live 11 Suite. When pressing the space bar one too many times while the plugin window is open -usually…
-
BUG: Session Strings 2 loaded in KK freezing Reaper 7.39
What: Komplete Kontrol 3.5.0 loading Session Strings 2 library freezes Reaper 7.39 under certain circumstances. My specs: Windows 11 64 bit, Intel i7, 16GB RAM How to replicate bug: Load Komplete Kontrol on a track; Load Session Strings 2; Arm track for recording, in Session Strings select "Smart Voice Splits"; Unarm the…
-
Bug report
I tried to find where you file bug reports on any of Native instruments sites, I also asked the chatbot but it had no clue what I meant by the question "where do I file bug reports?" . So here goes. system: MacBook Pro with m4 pro 24gb ram Sequoia 15.5 DAW Logic Pro 11.2 Problem: If I open any reaktor 6 based ensemble…
-
"A newer version is already installed" - considered an error
Hi, This week I installed a new drive in my computer, one dedicated for my production software. Because I decided to just download the products instead of relocating, I ignored the update-tab. After the download, my Updates-notifications don't update. The tab says there is an update available for "Controller Editor". When…