-
Kontakt 6 - SV LP2 is popping
I have the world's simplest .nki with a few MIDI CC wired. In the Group Insert FX chain, I have (Pre-Amp)... 1) SV HP2, 2) Solid G-EQ, 3) SV LP2 This, the workaround, for a very simple 2-pole HPF, low shelf attenuate, hi shelf attenuate, 2-pole LPF. I'm using a single (inverted) MIDI CC modulator, hard wired, on the SV…
-
How do I associate Instruments with Kontakt 7 instead of Kontakt 6?
When I'm loading instruments from my Komplete Kontrol library it always tries to load with Kontakt 6, instead of Kontakt 7 and then says "Your version of Kontakt is too old". I have both installed and I understand it is okay to keep both. How can I fix this so I don't have to load the Kontakt 7 VST first and then open the…
-
New - E-MU Proteus 1XR, Proteus 2, Proteus 3, Orbit, Planet Phatt, & Vintage Keys NKS
The Proteus Legacy Library has been produced to preserve the authenticity of E-MU Sound Module instruments of the 80’s. Beginning with the original hardware sound samples, instruments are mapped and programmed to match this legacy hardware. Native Instrument’s powerful script programming integrates the hardware…
-
Using hard coded velocity as "sample selector" across multiple groups
Hey all! I'm trying to build something based on the Roland JD-990, where you have 4 "tones", or layers if you will. I'm using the velocity layers across two groups (as there are more than 127 waveforms) to hold the various waveforms for one layer. I was able to set up a waveform selector that allows/disallows group 0 and 1…
-
Pitch Bend Help on Kontakt 6 (SOLVED)
I'm not entirely new to Kontakt and I've seen many older posts about adding pitch bend mods to an instrument. I'm confused as to how to change the pitch bend from 2 semitones (default) to a broader range. I've read to add a pitch bend mod in the Tune wheel section when editing an instrument and to just "keep adding more…
-
Session Strings Pro 2- how to get notes to flow together smoothly
I apologize if this is the wrong forum but I'm not sure if my issue is a problem with how I'm doing string arrangements, Kontakt, Session Strings, or my PC. In Cubase, I've created a string arrangement with 3 violins, viola, cello, and bass. For all notes, a new note starts at the same point that the previous one ended…
-
Kontakt 6 Full/7 Player+ Mac Studio M1 Ventura 13.9 Instability in Logic Pro 10.7.9
Hello, I'm not sure if anyone else is experiencing this: Just 3-4 instances of Kontakt 6 Full or Kontakt 7 Player in Logic Pro 10.7.9 is causing severe playback issues in the form of glitching, crackling, and general erratic behavior. It's maxing out the last core of the CPU without utilizing any of the other cores. I have…
-
Kontakt side browser re-ordering resets other apps to stock form
Ever since I got an M1 MacBook Pro, Kontakt 6 and now Kontakt 7 have exhibited two bugs when re-ordering certain libraries in the side browser. 1 – Whenever I reorder these problem libraries (e.g. Jade Ethnic Orchestra, SonoKinetic Modal Runs, Symphobia 4 Pandora, etc.), then quit Kontakt, it causes nearly all of the apps…
-
Utopia not showing in Kontakt 6
I just bought Duets and Utopia together and installed them together. They both show up in Kontakt 7 Player, fine. But I have a version of Komplete which includes Kontakt 6 (and have built a template for it) where Utopia does not show up - BUT Duets does! In Kontakt 6, I have tried adding Utopia via the database but it…
-
DOUBLE CLICK ON ui_SLIDER TO RESET THE FUNCTION
Hi there, is it possible to reset my ui_slider to its default value with a double click? For example, I have a ui_slider mapped to speed which is 100% at frame 50, when I turn it up it is at 100 frames and the effect is at 800%. So that I don't have to turn it back to the 100% (50 FRAME), I would like to add the…
-
Beginner, is that I need ?
Hey ! I am a beginner in creating music with DAW software (I use Logic), so I would like to understand what Kontakt or Komplete is before making a purchase. My music is more orchestral, peaceful. I'm mainly looking for nice virtual solo instruments (violins, cello, flutes, clarinets etc...) but also ensembles (string…
-
OutputConfigs and other files
Should I be able to copy an OutPut Configuration file from Kontakt Player 6 to Full Kontakt (6 or 7)? How about Multis? I was unable to get this to work from KPlayer6 to Kontakt 5 I would like to avoid a lot of work if I decide to upgrade to Komplete 14/Kontakt 7
-
Kontakt Multiple Instruments to output but Pro Tools not seeing additional channels
I am running Pro Tools on Mac Monterey 12.1 with Kontakt. I am having trouble routing more than just one instrument onto its own track in Pro Tools. I load a NOIR Pure piano, set it to Midi Ch 1, by default it assigns output to Stereo Ch 2 and I can hear and record it just fine. I add Synth Pad and set Midi to Ch 2 and the…
-
"change_tune is not Allowed in this callback type" but the script is fine!
hey, im trying to "program" an neighbor round robin script, i had some help in a different forum but its still not working, here is the script: "on init declare $NewNoteID declare $RandResult end on on note ignore_event($EVENT_ID) $RandResult := random(1,3) select ($RandResult) case 1 play_note($EVENT_NOTE,…
-
Colours of upper/lower manual in Vintage Organs way too similar
Hello. Is there any way (by settings or by a workaround such as editing a configuration file) to change the Komplete Kontrol S keyboard's colour coding of the upper and lower manual of the organs? If there is no individual way, it would be really helpful if this was changed in the Vintage Organs Plugin by NI directly. The…