-
M+ Combine Scenes in scene mode (not arrangement)
M+ standalone, is there a way to take two scenes and combine them into one scene, without using the arrangement window. I don't want to build a song, I want to build larger scenes that combine different patterns from the same groups. ie: one drum group has two different patterns, one in each scene, and I want to append the…
-
Midi Sync Maschine + and KK61 to LM Drums
Hello My wife got me a Behringer LM Drum and i am trying to Sync them together by USB midi câble but i'm getting some issue that i couldn't résolve After few day of several hour trying ..… So i'm asking for your help please 🙏🏼 I need the LM Drums to play my drums and the + to play anything else i need / They have to share…
-
Maschine 3 Sync In Logic
Looking for help / walkthroughs on how to work with scenes from Maschine within Logic… selecting scenes and getting it to sync with a session in Logic that already has audio and/or midi seems a bit wonky / confusing. I've watched a ton of videos but they all really deal with multi-track routing, not the compositional side…
-
Maschine not syncing with cubase loop
updated to latest software, in song mode, loop turned on in maschine and cubase, 8 bar loop, at each cycle start maschine looses time and the sounds do not align, if I run just maschine with no cubase cycle turned on it works fine but that doesn’t work for work flow where I need to stay within a confined time to work on a…
-
Will M+ get support for Link Audio?
With Live 12.4 beta Ableton announced updated Link protocol to share audio streams between devices or software on the same local network (e.g. WiFi): Getting Started with Link Audio with the L12.4 Public Beta Seeing how M+ has (original) Link support, I wonder how likely it is to offer it for Link Audio as well?
-
Which clipper are you using inside Maschine?
Hi everyone, I’m curious what clipper plugins you are using inside Maschine. Because Maschine doesn’t have proper PDC (plugin delay compensation), the choice of clippers is quite limited if you want to avoid timing issues or phase problems in the project. I’m trying to find options that work well without introducing…
-
Struggling With Cubase 14 Integration & Routing
Hey guys - firstly, I really love the Micro Mk3. However, I cannot get it consistently working with Cubase 14. I've gone through all of the relevant YouTube videos I can find. I can get a partial integration, but nothing that consistently works. Is there a definitive guide somewhere? I did reach out to Native Instruments…
-
Upgrading M+ OS to Maschine 3 - was it worth it?
I'm still sitting on the fence regarding upgrade M+ from Maschine 2 to Maschine 3. I'm not sure i'm craving for any of the new implemented features, my main concerns are stability, performance and bugfixes. From reading the forum i've got an impression that the new OS is slightly more CPU-heavy. Is this really true? What…
-
Maschine 3 Custom Thumbnails/Images
Finally got the chance to import all of my Maschine 2 content over to Maschine 3 and have noticed all of the custom images for User Sounds, Groups, and Samples are now gone. So are the artwork from 3rd party vendors. Has anyone found a workaround to do Custom Images on Maschine 3 yet? Looks like editing the images folder…
-
[v1.6.1] MASCHINE PLUS/MK3/MIKRO MK3 Ableton Live 11+ & 12.1+ MIDI Remote Script
MASCHINE PLUS, MK3 & MASCHINE MIKRO MK3 total integration with Ableton Live 11+ & 12.1+ (Windows & Mac OS) Introduction: This Control Surface/MIDI Remote Script, providing total integration for Ableton Live 11, 12.1 and up, was exclusively built for MASCHINE MIKRO MK3, back in March 2021, but compatibility and same…
-
Browser previews get cut off after less than half a sec
“Maschine 3.4.2 on Latest Sequoia—browser previews cut off after half-second on mouse/(typing) keyboard when scrolling through browser, but plays full with controller? (Prehear, normal behaviour) Loop icon on bottom left makes the sound preview cut off after not even half a second.when off and preview on, plays normally as…
-
Maschine Mk3 control surface for Ableton 10 not working
I can't for the life of me get my maschine mk3 to show up as a control surface in ableton 10. I've followed all the steps over and over 20+ times from these instructions (https://support.native-instruments.com/hc/en-us/articles/4413367278097-How-to-Install-Maschine-Templates-for-Ableton-Live). Its not working….I just want…
-
Some Maschine expansion updates larger than others
I've been updating my Maschine expansions over the last few months (I have every expansion released) and notice that some updates are on the order of 4.5GB where others are 2MB. The release notes for t state: "NICNT file for improved Native Access performance and integration". Why such a large difference for some and not…
-
Playhead immobile for copy/paste if Midi clock present
When I have the Maschine+ connected to my computer via the Midi In, I get into a situation where I cannot use the shift+D knob to move the playhead around for copying and pasting. I have Logic sending midi clock - although I'm not syncing the Maschine to it, and I'm not even playing anything in Logic. However I believe…
-
Group vs. Pattern
Hello, another two related questions about M+: (1) I read somewhere that M+ is limited to 8 Groups - is that correct? Is there only 1 bank of Groups? (2) If I have a drum kit loaded in e.g. Group A, do Patterns concern all sounds within that Group, or each sound separately? For instance can I have 1-bar Pattern for kick,…
-
Audio In Not Working Anymore
Maschine + in Software Mode (latest update) To be clear, the audio coming in, in STANDALONE, does work. Its when I switch to CONTROLLER MODE, it doesnt work. It did at one time. No audio input Everything is set correctly - Ive sampled my hardware in the past. The audio cables are fine, sound is coming out of hardware. All…
-
EXT LOCK
It's a real shame. I just discovered that EXT LOCKS aren't supported in Maschine3, Maschine Studio, or Micro. I was really looking forward to this feature, and the more I was excited about the new version of Maschine3, the more disappointed I was that I couldn't use it on any of my devices. Is this a temporary issue that…
-
Maschine Hardware: Design That Endures
Proven Design Philosophy The Maschine hardware series, maintaining roughly the same number of buttons and navigation aids for over ten years, clearly proves it's on the right track with design decisions. This is evident in Akai's MPC XL choice, which the company presents as the flagship standalone and adopts similar…
-
Third Party Plugins Not Showing Up
Hi! I am trying to use the Vital (Free) synth within the Maschine 3 software (Not even worried about trying to mess with it on the Maschine Mk3 at the moment) and I just cannot get it, or any other third party plugins, to show up within the software. When I go to File → Preferences → Plug-ins, it shows up as a Plugin, it…
-
Maschine MK3 assigning the same soundcard channel to several Maschine MK3 stereo outs (Ext1, Ext2 e)
Hi all, My Maschine MK3 is connected to a Audient EVO16. Let say I have the following assignments in the Maschine 3 software, Preferences, Audio, Outputs: Ext1L to analog 1 of EVO Ext1R to analog 2 of EVO Ext2L to analog 3 of EVO Ext2R to analog 4 of EVO But as soon as I set: Ext3L to analog 4 of EVO Ext3R to analog 1 of…
