Help, Learn and Connect

Recent discussions

Up to date Maschine 3 manual anywhere
Any up to date Maschine 3 manual anywhere? Ideally 3.2/PDF but I'll take whatever. I own a Maschine Studio, sure, legacy(ish), only Maschine 2.8 manual there. So I look at Maschine 3.2 MK3 manual, in song arranger view, instead of pattern it shows clips as button 2 on the screenshots. Workflow seems different, screens…
Maschine Jam does not sync up with Maschine studio - piano roll/step sequencer
Hi Please check the video commentary. One thing I forgot to state, with both controllers the notes/events show up in the software as normal. Windows 11 / Maschine 3.2 Thx!
Maschine pitch preview
If I change the pitch by moving event/note up and down with my mouse (I need to press that speaker icon before of course), I can hear a preview as I move it up and down. If I go to the Keyboard/Events view on Maschine Studio controller I can't seem to do the same. Big bummer! Does MK3 work? (Using 3.2 Windows) Thx
Mashine lights up then goes dark...how to fix
Mashine Studio lights up and scrolls colors then goes dark...how to fix? Software works fine, but the hardware has quit on me
backup libraries
Hello, I would like to know if there is any way to backup the libraries so that later, if you format and reinstall Windows, you don't have to connect to Native Access to download the libraries again.
Seeking tutor for Maschine Studio Black in greater SF Bay area
Hi I am in the greater Bay area; I have a maschine studio black controller and wanted to find someone who is well versed with that device. Can someone refer me to someone or a source that can assist me with mastering this beast? thanks
Why Maschine 2 only has demo mode available in NA 2 even though I have full mode serial registered?
Had an issue with my Fujitsu laptop equipped with i3-4300m processor and 16gb RAM so I had to reinstall Windows 10. Loggged into Native Access 2 and proceeded to reinstall all NI products. Traktor 3 and 4 installed and worked great but. Maschine 2 only allows me install Demo. Even though I have full version and have been…
Select/deselect multi channels on Maschine Studio
On the Maschine 3.2 application I can go to the mixer view and multi-select and deselect channels by clicking on them and holding the shift button or control button or CTRL-A or whatever. They will turn light grey when selected, and when I move one fader, all the selected channel faders with all move at the same time.…
Maschine Studio view/edit notes in ideas mode only
In ideas mode (not arranger/song mode) is it possible to view the notes being played so they can be edited? (Nudge/delete etc). I can do it in song mode/arranger. Maschine 3.2/Windows 11 The question here is specifically to do with the Maschine Studio controller not the desktop application Thanks.
DrumLab Mapping for Maschine/MPC?
Hi, I'm checking out the MPC3 Desktop beta and I'm loving the fact that I can load VST3. I've got DrumLab loaded in Komplete Kontrol and I've noticed that the Kick, Snare, etc. aren't loaded in the usual/traditional places that they would be on a drum-machine. I see there's a mapping page, and I've tried Default, GM,…
Maschine Studio and Maschine v2 updates? Turorials for Maschine Studio and Maschine v 3?
Hey all, I'm an old dude so I confuse easily. Please be gentle. System: Windows 10, Ryzen 7950X, 96GB RAM, SSD Drives all around Kit: Maschine Studio, Maschine v 2 & 3 Questions: 1) Can I update Maschine (and/or Maschine Content) any higher than v 2.1.8? 2) Are there any tutorials out there for Maschine Studio and Maschine…
Ableton Live 12.1 Controller Remote Scripts update
We need new controller Scripts for Ableton Live 12.1 for Maschine Studio, Jam, Mk2, Mikro Mk2!!!!! All controllers. Would be great if NI could update their scripts and even add some more screen integration. I think that would sell much more devices if the Ableton live integration was deeper on the KK keyboards similar the…
Machine Studio. Can I still upload komtrol products ?
I have an option to buy machine studio. Can I still upload komtrol products. Etc ?
Upgrading old MK1 projects?
I know already my Mac is too new to install MK1 but I have a few old Macs laying around I need to to access my MK1 files but I have Maschine 3. I already know I need to install MK1, update it, add version 2, update the files then open the files in version 3. The problem is, where am I gonna get the version 1 of Maschine?…
Can only see patterns on MStudio when pressing the Pattern button.
I'm trying to edit a pattern from the Studio controller but I can only see them (the events) while holding the pattern button. The online manual seems to have omitted most information about controllers.
Maschine Studio controller and 3.1.1 software - User Chords not working.
User Chords appears broken in Maschine Studio controller and 3.1.1 software. There doesn't seem to be any documentation on how to do this on the studio, but I've seen a video with the the MK3 and still can't can't get it to work. Steps to repro. Use FM8, goto PAD mode, make sure "keyboard" is selected, select "Chd Set"…
Maschine Studio - sending MIDI notes not working
Hey all, Been trying to set up my Maschine Studio to send MIDI notes to my Behringer MS1, but for a weird reason, i'm not able to do so. As i run Ableton Live, with it's external instrument I don't have any problems with that, but for a reason beyond me, i can't do it via the Maschine which is my studio centerpiece.…
Maschine studio in 2024?
Hi all. Does anyone have any experience with maschine studio? I wondered if it would be a good or bad idea to buy one used as I have maschine 2 software. Would it be compatable with the newer software? And how would the features stack up against the MK3?
Maschine 3 MIDI Out: Random Freezes
Hi, I've created a ticket, but am wondering if anyone else has experienced this? Maschine 3 + Maschine Studio: Maschine stops sending MIDI out on port 1 at random times. I cannot reproduce. The only way to fix it is to restart the software. Restarting the hardware does not work. I'm going to switch to Port 2 and see if…
Maschine Studio Maintenance - Pads Triggering Other Pads/Pads Sticking
Hey All, I've determined that its probably time to get under the hood of this here Maschine Studio and give the ol' gal a good cleaning in an effort to resolve the aforementioned issues I'm running up against with the device. I'll be doing the work personally. The device is no longer under warranty and I'd like to learn…

Sign in to unlock member-only content

New questions

Why Can't I drag and drop from my expansion packs
I used to be able to drag and drop onto my projects I'm using the latest version on FL Studio and I'm not able to drag and drop loops or one shots can anyone out there help with this issue? It would be very helpful if I could get some help or at least an answer of why, Thank you in advance
Reloading sounds after away periods
When using my Native Instruments sounds, either through my DAW (Logic) or the dedicated Komplete Kontrol or Kontakt 8 apps, if I have a break for a few moments, the sounds appear to need reloading? To make it clearer; I'm playing and everything sounds great, I take a break for a minute or two, come back I play and the…
Removing Serial Number from MPC
I am using a Windows PC to upload Native Instruments Expansion packs. I recently purchased two of them and mistakenly registered the serial number directly to my AKAI Pro MPC instead of registering it directly to my inMusic application software via Windows. As a result every time install and download and extract the…
Traktor S4 MK2 --> Steinberg UR22C
Hi Folks, some time ago I got Maschine and a SteinbergUR22C running. That's very OK … several connections possible —> latest choose the Yamaha Steinberg Asio (shared) ports … so that I can use also my NI Keyboard with Komplete CC…… Now gettin the Traktor running…. using the Traktor same way → Steinberg UR22C…
Error while mounting disk image
Hello everyone, I purchased some products from Native Instruments and I’m not able to download it due to that mounting disk image issue, I’m using Windows 11 Pro and I did most what of the internet that can be done but I’m still getting the same problem, I should be working by now instead of doing IT, I repaired Windows 11…
dc offset
Hello, does izotope rx 11 standart have dc offset and how do I enable it?
The master control knob no longer seems to work on my Traktor Kontrol S4 MK2 Controller
I have been using a Mac (OS Sequoia), and the master volume knob on the Traktor controller has been working fine with Traktor Pro 3 software. I have re-installed both Traktor 3 as well as trying out Traktor 4, all the knobs and buttons work, except for the master volume knob. I have also added in Master Volume adjust in…
Noire Piano trouble
Hello, Since I have got Noire Piano from Native, working with Cubase Artist 8, when I record in one channel, sometimes the notes in the playback automatically change half note higher without any reason, is a big problem because make me crazy. With the other pianos I have prom Native like Grandeur, The Gentleman, The…
Graphic error in Traktor Pro 4 4.2.0 34 (ARM64)
I did a zoom because from the screenshot you can see less than in reality, but do you also see this bar under Traktor?
X1 MK3 is not recognized
I just purchased the X1 MK3, and I am running the S8 controller. I was running Traktor 3 but purchased the upgrade to 4 a couple of days ago, then purchased the x1. I updated everything, then opened native access, entered the serial, and then checked my native instruments account to make sure it's listed. It was. I then…