-
Longer backspin with Kontrol S2 MK3?
Hey there! I'm the proud owner of a new S2, but one thing that's been bugging me is that I can't figure out how to get a nice, long backspin like what happens when you use the mouse on a track or like you can easily do with the S4. I've tried adjusting the jogwheel sensitivity, but that didn't change backspin length like I…
-
Reloop rp-8000 mk2 + Z2 traktor
Setup: 1 single reloop rp-8000 mk2 turntable 1 z2 traktor control mixer +Traktor v3 latest update Use of setup: DVS+ANALOG VINYL I would like to know: -Should I plug the reloop rp-8000 into the "phono" input or into the "line" input of the Z2 mixer? Which is the best connection between the two for optimum latency response…
-
Traktor Cruise Mode and Hardware Faders: Is there a way to disable manual transitions?
Cruise mode is great, but I have messed up badly in two gigs now, because of accidentally triggering an auto-transition by touching the faders. I think there are two points of confusion: When cruise mode is activated, it takes control of the software faders and now they are out of sync with the hardware faders (can't…
-
I just won a 9th gen ipad and want to use it with my rig
I have a traktor Kontrol S4 mk 3 and I'm running Traktor Pro 4 (stem mixing) and I'm wondering if this ipad will even support Pro 4 or even 3 or lower? I'm getting mixed results online. I'm reading that Virtual DJ or Djay Pro might work….I am fairly sure rekordbox would work but I don't know if ANY of those would work with…
-
Traktor 3.9 Randomly Freezing and losing audio output
When Traktor freezes and you have to force close, does it still keep a traktor log to help figure out why it happened? I submitted a ticket but wanted to try here too. I've been with traktor for 6 years and never had a freezing problem like this before. I've been on 3.9 since the official release and haven't had any issues…
-
Akai Apc40 Mk2 new mapping version
Hi group, A new version of my Traktor mapping for the Akai Apc40 Mk2 is available. It contains serveral improvements and fixes. Enjoy.
-
it's about Audio interface "MOTU Ultralite mk5" and old OS.
Hi all, I am a deejay, I use TRAKTOR PRO3 for deejaying and MASCHINE for production. I recently lost my Traktor AUDIO10 sound card, given my needs I want to turn to a MOTU Ultralite MK5. My question is about OS compatibility, because I have two setups, a first with a late 2011 mac OS10.13 (which I take with me for gigs)…
-
Looking for a good mapping for XDJ-RR and XDJ-XZ
I have Traktor Pro 3 and I am looking for a GOOD mapping to make it work properly with Pioneer controllers XDJ-RR and XDJ-XZ. I have seen some mappings from other people in other places, but seems like none of them (as far as I have found) work 100% ok with these controllers. Anyone could help with this?
-
Yet another external tool to create Stems !
Hello NI community, and hello to the Stem fans and users. My context first: I own some old hardware since 15 years : an old Macbook Air with Traktor Pro 2 installed, along with a Traktor Kontrol S4 MK1. Luckily this setup enables me to mix Stems. Unfortunately, I cannot run the software stack necessary to separate tracks…
-
having a problem getting Traktor 3.5.3 to output to bluetooth speakers on a Mac
i am running an olde Mac and an olde OS (OSX 10.13.6) withTraktor 3.5.3 i have a bluetooth speaker connectedm which works with everything but the Tracktor programme i know i am a decade and a half out of date, but i think it is just a preference setting i have missed, though i have the following set up ….. Output Routing:…
-
How to stop cue audio from going to Monitor AND Master? - Traktor Pro 3, MS Windows 11 Home
When I press the cue audio button (the headphones button), Traktor Pro 3 sends the audio signal to both the Output Master and the Output Monitor. How do you send the audio to just the Output Monitor? This question regards a Traktor Pro 3 install on a Windows 11 Home OS. Below is the Output Routing. Output Master is a set…
-
A little Rant, regarding being Trapped in the NI Ecosystem for 5 years now
I was DJing some years before I found Traktor as THE software to best fit with my flow. When I bought myself a Maschine Mk3 in 2018 including the Komplete bundle, it was promised that the sync of Traktor Pro and Maschine, using Windows should be working seamlessly. The statement I got from an NI Represantative was "We're…
-
Drag and Drop Problem
Since I have Windows 11, I can no longer drag and drop songs from Explorer into Traktor!Can anyone help me??
-
TraktorPro 3 Update License Transfer
Hi. I have Traktor Pro 3 Update, used to upgrade TRAKTOR SCRATCH PRO II Software Upgrade, in turn used to upgrade TRAKTOR SCRATCH PRO UPGRADE, that upgraded TRAKTOR SCRATCH DUO - I believe 😅 I want to transfer Traktor Pro 3. My question is: do I have to generate a transfer code only for “Traktor Pro 3 Update” or also for…
-
Exporting STEMS from Traktor 4 Pro
Hi everybody, I have two macbooks and use Traktor 4 on the newer one and Traktor 3 on the Older one (limited at High Sierra OS). Both versions could play stems, but Traktor 3 don't could generate them. It is possible export the stems from Traktor 4 and import them on Traktor 3. Thanks.