-
Traktor Cruise Mode and Hardware Faders: Is there a way to disable manual transitions?
Cruise mode is great, but I have messed up badly in two gigs now, because of accidentally triggering an auto-transition by touching the faders. I think there are two points of confusion: When cruise mode is activated, it takes control of the software faders and now they are out of sync with the hardware faders (can't…
-
I just won a 9th gen ipad and want to use it with my rig
I have a traktor Kontrol S4 mk 3 and I'm running Traktor Pro 4 (stem mixing) and I'm wondering if this ipad will even support Pro 4 or even 3 or lower? I'm getting mixed results online. I'm reading that Virtual DJ or Djay Pro might work….I am fairly sure rekordbox would work but I don't know if ANY of those would work with…
-
Traktor 3.9 Randomly Freezing and losing audio output
When Traktor freezes and you have to force close, does it still keep a traktor log to help figure out why it happened? I submitted a ticket but wanted to try here too. I've been with traktor for 6 years and never had a freezing problem like this before. I've been on 3.9 since the official release and haven't had any issues…
-
Akai Apc40 Mk2 new mapping version
Hi group, A new version of my Traktor mapping for the Akai Apc40 Mk2 is available. It contains serveral improvements and fixes. Enjoy.
-
it's about Audio interface "MOTU Ultralite mk5" and old OS.
Hi all, I am a deejay, I use TRAKTOR PRO3 for deejaying and MASCHINE for production. I recently lost my Traktor AUDIO10 sound card, given my needs I want to turn to a MOTU Ultralite MK5. My question is about OS compatibility, because I have two setups, a first with a late 2011 mac OS10.13 (which I take with me for gigs)…
-
Looking for a good mapping for XDJ-RR and XDJ-XZ
I have Traktor Pro 3 and I am looking for a GOOD mapping to make it work properly with Pioneer controllers XDJ-RR and XDJ-XZ. I have seen some mappings from other people in other places, but seems like none of them (as far as I have found) work 100% ok with these controllers. Anyone could help with this?
-
Yet another external tool to create Stems !
Hello NI community, and hello to the Stem fans and users. My context first: I own some old hardware since 15 years : an old Macbook Air with Traktor Pro 2 installed, along with a Traktor Kontrol S4 MK1. Luckily this setup enables me to mix Stems. Unfortunately, I cannot run the software stack necessary to separate tracks…
-
having a problem getting Traktor 3.5.3 to output to bluetooth speakers on a Mac
i am running an olde Mac and an olde OS (OSX 10.13.6) withTraktor 3.5.3 i have a bluetooth speaker connectedm which works with everything but the Tracktor programme i know i am a decade and a half out of date, but i think it is just a preference setting i have missed, though i have the following set up ….. Output Routing:…
-
How to stop cue audio from going to Monitor AND Master? - Traktor Pro 3, MS Windows 11 Home
When I press the cue audio button (the headphones button), Traktor Pro 3 sends the audio signal to both the Output Master and the Output Monitor. How do you send the audio to just the Output Monitor? This question regards a Traktor Pro 3 install on a Windows 11 Home OS. Below is the Output Routing. Output Master is a set…
-
A little Rant, regarding being Trapped in the NI Ecosystem for 5 years now
I was DJing some years before I found Traktor as THE software to best fit with my flow. When I bought myself a Maschine Mk3 in 2018 including the Komplete bundle, it was promised that the sync of Traktor Pro and Maschine, using Windows should be working seamlessly. The statement I got from an NI Represantative was "We're…
-
Drag and Drop Problem
Since I have Windows 11, I can no longer drag and drop songs from Explorer into Traktor!Can anyone help me??
-
TraktorPro 3 Update License Transfer
Hi. I have Traktor Pro 3 Update, used to upgrade TRAKTOR SCRATCH PRO II Software Upgrade, in turn used to upgrade TRAKTOR SCRATCH PRO UPGRADE, that upgraded TRAKTOR SCRATCH DUO - I believe 😅 I want to transfer Traktor Pro 3. My question is: do I have to generate a transfer code only for “Traktor Pro 3 Update” or also for…
-
Exporting STEMS from Traktor 4 Pro
Hi everybody, I have two macbooks and use Traktor 4 on the newer one and Traktor 3 on the Older one (limited at High Sierra OS). Both versions could play stems, but Traktor 3 don't could generate them. It is possible export the stems from Traktor 4 and import them on Traktor 3. Thanks.
-
Traktor Kontrol S2 MK2
I'm thinking about purchasing the Traktor Kontrol S2 MK2 and I have the Traktor PRO 3 software on macOS Sequoia. Do you know if it works well? Could I have an incompatibility problem?
-
Traktor Kontrol S3 - Low Audio Output Problem
Good Day To whom it may concern I just received my Traktor Kontrol S3 DJ Controller this past Friday, Took it for a proper spin on Saturday & noticed that the Master Output is Incredibly Low, Including the Headphones Volume Level, it starts getting louder as close to turning the Volume All the way to It's Max. This is an…