-
Managing user content between Maschine Plus standalone and controller modes
Apologies if this is covered elsewhere, but I'm having problems figuring out how to manage samples between Maschine Plus in standalone and controller modes: I have several non-NI sample packs comprising breakbeats, pads, and sound effects (etc) On the Maschine Plus in standalone mode, it seems better to manage these with a…
-
Yamaha DX200 Maschine Group
This is something that i made for me and like to share with you, i am not sure if here is the right place, or it is the Sampling Room, however i read that there, all contributions must be made with the auto-sampler, so since i used the Audio module and not the Sampler, i post here. As far as i know, this instrument was…
-
Maschine 3.0 desktop software update not available for M+ license owners (FIXED)
Dear @Matthew_NI Starting a new question as it looks to be a new issue. I tried to buy Maschine 3.0 update license on NI web site (the $29 option). However, it says "Wrong License", so to say I don't own the necessary license. I own a Maschine+ and thus I have Maschine 2 license included already. But I can't update, it…
-
Does the Komplete Kontrol S61 MK2 Keyboard work with the Maschine 3.0 software?
When I try to use my Komplete Kontrol S61 MK2 keyboard with the Maschine 3.0 software the KK S61 MK2 goes in to midi mode. I read complaint from other Komplete Kontrol MK2 uses that are having the same problem. So… does the Komplete Kontrol MK2 keyboards still work and have tight integration with the Maschine 3.0 software?
-
Maschine MK2 software not in Native Access?
I am trying to use my Maschine MK2 on my new computer. Years have gone by since I used it last. I still have my old serial numbers and I inputted them into Native Access. Although I "successfully registered Maschine" on Native Access, the Maschine software still doesn't show up. Kontakt, Massive etc. all show up and…
-
i cannot find the maschine 3 in native access
so i got a used maschine mikro mk3 today and they transferred the license to me but once I register the serial number in Native access i can't find maschine 3 there here is a screenshot of my native access i tried the stuff in product support tab and refreshed it and reset the xml file in the service center folder too but…
-
Maschine pad repair , how ?
Hi everyone, I have a maschine mk and before 4 pads did not register any information but now it has gotten worse all the pads have a problem, I consulted a technician but without an electrical diagram of the main board it was impossible to measure the tracks and components to replace them.... I would appreciate any help…
-
i don't find the software
Hi everyone, my name is Giulio. Yesterday I bought a used Mikro MK3. I registered on the NI website, installed and opened Native Access for Mac, and entered the serial number of the Mikro MK3. However, I can’t find the software in the Native Access library (I assume it’s Maschine 2 or Maschine 3) to make my Mikro work. I’m…
-
Error changing pad color?
As I am working through a project, I will select a pad and change its color when I add the instrument/one-shot to it. Randomly, unless I am activating a setting that I don't know about, instead of changing the color of the selected pad, it changes the color of every pad in the group. I will provide 2 images to show what is…
-
Maschine 3.0 Feature Requests - more External MIDI control for live performance
New Maschine (Mikro MK3) user here, loving the Maschine Ecosystem so far and hopefully upgrading to 3.0 soon. A core feature that would open up the Mikro MK3 to an entirely different kind of live jamming and performance would be the ability to set the active Group via external midi control. I get that the bigger Maschine…
-
New Maschine+/Mk3 purchase comes with Maschine 3 software ?
Regarding the release of Maschine 3 software, I have a few questions : If someone buys a Maschine+ or Mk3 today, does it come with the newly released Maschine 3 software or do you still have to buy the upgrade ? What about Maschine Central Expansion, is it included or is it an optional add-on purchase ? If neither are…
-
Maschine 3.0 and older devices?
Hi guys! So we have a 3.0 update coming in November, kind of excited and… worried. I own a Mk3, a Kontrol m32 and a Maschine Jam, haven't found any official news that states that Maschine Jam (and Mk1, Mk2, Studio) will be supported on 3.0 On the contrary "words of the streets" say that Maschine 3.0 does not support older…
-
Hard Industrial Techno in Maschine Plus
Hello machine friends I have a general question. I've had my Maschine Plus for about a year now and so far I'm really impressed. I love the workflow, I love the sound of the internal synths and especially the quality. I myself love and produce Hard Industrial Techno and I would be interested. Does anyone have any…
-
How many scenes per project do you really can load in Maschine 3 software? I'm a bit confused.
Hello everyone! I've just checked the Maschine comparison page which says that the number of scenes per project is limited to 64 for all three models. There is no clarification about software/hardware difference like it is for some other parameters in the chart. This makes me assume that even for Maschine 3 software the…
-
How to get MASCHINE software?
I bought MASCHINE MK3 but the MASCHINE software is missing. REAKTOR, MASSIVE and MONARK downloaded correctly but MASCHINE did not. How to get MASCHINE software ?