-
NI Branded ARM Kontroller
Hi Folks, Is there any change that NI would release an add on ARM based Kontroller than runs all of the software of Maschine+ but with updated hardware? I am thinking about a modded Orange Pi 5+ that connects via USB to Maschine MK3 and Maschine+
-
Machine 1- Compatibility Issues/Options
I have the Machine 1 and was using it on an old macbook pro. The current software is 10.15 Catalina. I'm curious as to my options as this config won't work moving forward, If i'm reading this information correctly. Am I just out of luck with this and need to upgrade? Is there a workaround while on this OS? Due to other…
-
Maschine Mikro MK3, shift button sticks?
So, I'm not quite sure what is happening here, or if it's something I'm accidentally doing? Basically, if I'm jamming on the Mikro, hitting SHIFT + Any Button, let's say SHIFT + Record to count myself in; sometimes the shift button gets stuck to its engaged position. It isn't lit up, but the controller starts responding as…
-
Using Maschine MK3 or Maschine Plus as a Dawless Performance Setup
I'm interested in using the Maschine MK3 as a DAWless live setup for performing long and extensive house or techno sets. Typically, this is done using Ableton Live with a Launchpad and LaunchKontrol XL. However, I want to see if a similar setup can be achieved with the Maschine MK3. I got the idea after watching Native…
-
Maschine with external effects on a send
While Maschine offers flexible routing options for sending sounds to external hardware effects, it can be useful to keep all your effects, including external ones, in a single group and access them via aux sends. You can route an effects slot within your effects group to an external effect. However, Maschine won't…
-
Maschine MK3 + Komplete Audio 6
Im using the MK3 to create beats. Let’s say I’m playing live: I start with adding a kick loop that sounds in the speaker. And when I start browsing for a new sound to add, I don’t want the audience to hear that, it should only be in my headphones they should only hear the first kick loop. Then I record a new sound, and…
-
Trouble migrating my NI products to Macbook M3
I know this topic has been discussed at length before, but I think I may be an edge case so unfortunately, I'm doing it again. I upgraded to a Macbook M3 running Sonoma 14.5 and migrated all of my apps and documents using Apple Migration assistant to find that my NI products weren't working. All of my Adobe and Ableton…
-
Feature Ideas Section: Format Questions and Clarifications
Hey all, I see that there have been some questions around the what, why and how of the "Feature Ideas" section. In order to not clutter the feature topics themselves with a meta discourse on the format, I thought we can take it here. Some people have been asking why we use this format, what it is for and how we intend to…
-
Kontakt 7 won't load in Maschine 2 anymore?
For some reason, I'm unable to load Konkakt 7 into Maschine 2. I used to be able to by going to the VST3 group menu and selecting it from the list of options, but it no longer appears. Kontakt and Kontakt 7 both appear in the list of plug-ins in the Plug-In Manager under Preferences, and I've tried reinstalling Kontakt 7…
-
Help Needed! Cant open Maschine projects because dropouts
Hey! I have a problem where i cant open almost any of my projects because maschine does dropout without any error messages or crashlogs. I have a backup in my SDD and Onedrive but i cant open these projects even from there! Already contacted NI support but with no solution yet. Really hope someone can help since there are…
-
Maschine HW changes Scale?
Don't know why I didnt ask over the years in the Community. For years on the MK HW if I set Root Note/Scale Type go into Chord Set, lay pattern then switch back to Keyboard mode. I get W-H Dim as TYPE for my scale. Not the SCALE that was set prior to going into Chord Set. The Maschine SW/HW and KK S-series manuals do give…
-
Maschine Mikro MK3 Stuck on ‘Busy… Loading?’
Hey all, this is an issue on two separate PCs (windows 10 and windows 11). I think I’ve drilled it down to Kontakt instruments.. Basically, when I try to load a Kontakt instrument from the browser on Maschine 2, my Mikro MK3 screen shows ‘Busy… Loading’ forever, and I have to close Maschine 2 and relaunch to get it…
-
M32 mixing in Maschine
I can't seem to find how to use the 8 knobs on the M32 to use as volume/pan control in Maschine software. The FAQ on Native Instruments website says it's possible. Am I missing something? https://www.native-instruments.com/en/products/komplete/keyboards/komplete-kontrol-m32/faq/
-
Does anybody has experienced Mashine Mikro mk3 Frezzing?
I been experienced hardware freezing since i bought the Maschine Mikro MK3, i been trying with 2 computers and it keeps happening, the NI suport tool couldnt track the problem y the suport was not enogh, a friend of mine also exp the same problem. This makes me doubt about jaming o performing live with it
-
External hardware midi sequencer is glitching the M+ out when REC is enabled
Hi everyone, Back again for more of the same. I'm using a Polyend Tracker as the master sequencer for all my gear. I've got everything running well and as it seems it should on the Maschine+ only for one issue. I think the best way to explain this is thru an illustration: I have Group B set to receive MIDI channel 2 and…