-
Maschine plus pad problem
Hello everyone, I want to tell you about my experience buying maschine plus. I've used the maschine mk3 for quite some time and the pads are amazing. Then I decided to buy maschine plus since I wouldn't need to use the computer. The problems started when pad 1 in maschine plus had a different texture than the other pads,…
-
Maschine + Stuck on Start up screen
Hello Everyone, I have a Maschine Plus that I have had for less than a year now and it will not boot past the start-up screen in Standalone mode. It works fine in Controller mode, but for some reason, it will not load up in standalone mode. I have tried just about everything. I have reached out to NI Support, but have not…
-
M+ Crackling noise, bpm decrease and sound loss when switching scenes
I have a new Maschine+, fully updated to latest firmware and software versions: System 1.4.4.0 Maschine 2.16.0 (R112) Firmware 0.1.9 I was browsing through example projects, playing around and I would like to know, if anyone has stumbled upon this issue which can be reproduced like this: select projects -> Mother Board ->…
-
Why very slow? Sometimes I lose the output in the headphones. I have to turn it off and on.
I have a problem with the Maschine, it's getting very slow. when it loads a new project it can get stuck like this for several minutes. right now I'm waiting for it to unlock and it's already been 15 minutes. Sometimes I also lose the sound in the output, everything seems to continue to work, mixer levels move, the pads…
-
Maschine Plus update 1.4.4.0 no longer opens any projects
Now, after the update 1.4.4.0, Maschine Plus no longer opens any projects, only the associated samples but no longer the patterns😒
-
Feature Request: Convert single pattern to a clip using Maschine MK3/+
Before anyone says anything I know you can convert an entire scene to clips from the hardware but I want to be able to convert a single pattern to a clip from the MK3. Its weird that this is not possible considering most everything else can be done on the hardware. I don't want all patterns in a scene to be clips because…
-
new plugins for maschine plus?
Just scored a Maschine plus and enjoying it so far, never used the Mk3 much, as I wanted to use it standalone. Having been out for 2 years now, does anyone know if the Machine is going to get any additional synth plugins, would be cool to have some CPU optimised synths specifically for the Machine Plus, it would also be…
-
i have a problem with my Maschine Plus 25th (Anniversary) I lose the signal to the headphones
I have a problem with my Maschine, loading two groups the CPU is already at 60%, and at some point, I lose the signal to the headphones, everything moves as if it was still working. then I turn the Maschine off and back on and everything works again. can someone give me some answers? Do I need to use a larger SD card? Is…
-
Maschine+ Request for basic fx
NI please include a proper de-esser in the basic fx. It’s essential for vocals. When you need it you need it. Thanks A box where you don’t have to open up a computer, “have to use knobs”, turn them with your eyes closed while listening and don’t have to look at a screen! This thing is a dream for mixing. There’s so much…
-
Native access - download failed
Hello everyone, my name is Marco I'm an Italian guy, I just bought a ‘’Maschine plus‘’, in the past I played in raves with a Korg emx1 and now I've gotten closer to the world of music, I'm new to all this. Why can't I install? What can I do to solve this problem? When I install ALL on native access, do I also have to…
-
The best USB soundcard Multitrack Mixer/Recorder compatible with Maschine+ ?
Hello all, I'm asking me as Maschine+ owner, what will be the best option for an AudioSouncard USB Mixer multitrack which will be able to handle as input all Maschine+ sources mapped to that audio soundcard mixer and vice/versa: to handle my external instruments as input towards Maschine+ tracks (for sampling matters). SD…
-
Known good config?
Hi, is anyone out there running Maschine software on a 2021 14" M1 Max MacBook Pro together with a Maschine+ with minimal issues that can share their software and firmware versions? I want to start a project on Maschine+ and then move it to the Mac for finishing touches, but can't do this with my current versions. Right…
-
Setting Maschine+ pads to switch Live Guitar FX tones
I'm trying to use the Maschine+ as a standalone FX pedal and want to be able to hit different pads to load guitar FX tones on the fly. I know I'd add the FX to the "sound" tab, but after setting up 2 pad tones both play at the same time. Individually I have to select a pad, go to Channel/Input/AudioSource/NONE to turn one…
-
Hello everyone some Italian with ‘’maschine plus ‘’ on this community?
Hello, I'm an Italian guy, complete neophyte, in the past I used to play raves with a kore emx1, 10 years ago, I approached this world again buying the ''maschine plus''' I'm looking for someone who can help me and give me a good foundation, I'm reading a lot about this community, YouTube videos from native Instruments A…
-
What happened with Native Instruments ??
Two weecks ago the Update for the Maschine plus was faulty... Two Weecks later nothing Happens ! I cannot understand why the dont repear this Update.... I am new with Maschine plus and i had a Lot of Problems with Installing Maschine 2 and the Plugins. Then i finisched the Installation and have new Problems with the…