-
Maschine+ User Samples Management
Hello everyone. I have a question about handling samples in the standalone Maschine or Maschine Plus. I’m using a USB stick with samples on it, around 50 or 60 files. When I open the library, I get a list of all the possible samples. However, I would like to have them organized so that, for example, I have a group of 10…
-
better support for external audio interfaces in maschine +?
hi, in the new update there will be better support for external audio interfaces? i am particularly interested in support for behringer mixers (xr18, flow8) with most external interfaces maschine starts but stops after a while and you have to reselect the interface to make it work again.
-
Possible to save default preset/setting for recorded audio?
Hi all, I know it's possible to save a default preset for the Sampler in Maschine. But when recording audio, it seems like Maschine uses a built-in preset which automatically sets the samples to ADSR, which is different to my already set preset. Is it possible to customize this? Thanks, Nico
-
NI Branded ARM Kontroller
Hi Folks, Is there any change that NI would release an add on ARM based Kontroller than runs all of the software of Maschine+ but with updated hardware? I am thinking about a modded Orange Pi 5+ that connects via USB to Maschine MK3 and Maschine+
-
Reaktor instrument crashes Maschine plus after updating to firmware version 1.5.1
Hello , I have an issue with a reaktor instrument on the Maschine plus after updating to version 1.5.1. The monophonic version works well i turn the same instrument into a polyphonic version, i load it into a "Sound", it work well but when i clear the "Sound" the Maschine plus crashes sometimes. That never happend on the…
-
Tips for moving projects back and forth between Maschine+ and Maschine
Hi there Machine+ experts … I'm part of an EDM outfit and we practice live at a rehearsal studio so I regularly need to move projects back and forth between the M2 software and my standalone Maschine+. The sad truth is that although you can move files project files to and from a host via Storage mode, that alone isn't…
-
Using Maschine MK3 or Maschine Plus as a Dawless Performance Setup
I'm interested in using the Maschine MK3 as a DAWless live setup for performing long and extensive house or techno sets. Typically, this is done using Ableton Live with a Launchpad and LaunchKontrol XL. However, I want to see if a similar setup can be achieved with the Maschine MK3. I got the idea after watching Native…
-
Maschine Plus Stuck at start-up
Does any one have any solution to this? This happens to me after installing the new update. I tried the one with .nut file downloading to the root directory of the sd card but didnt do anything..
-
Machine Plus connecting question
hi i recently bought machine + i own my imac /apollo tiwn mk2/ genelec 8030c so my question is my imac apollo genelc is hooked together fine and i want to use my maschine plus together the way i want is i want to use machine plus standalone but i want to connect to speaker also while speaker can have input of my machine…
-
NimBank Tool Release - Custom User Library
NimBank is an open source tool to custom the Maschine user library (modify name, add bank, sub-bank, ... ) You can find the v4 release here : https://denivel.blogspot.com/2023/01/nimbank-tool-update-40.html And a tutorial here : https://denivel.blogspot.com/2016/03/add-product-and-bank-to-your-own-librar.html Enjoy...
-
Error "FM8 could not be loaded on Maschine+", anything I can do about it?
As the title says, trying to load any sound from FM8 and I get this error "FM8 could not be loaded". I can pre-hear the samples but when I press the "LOAD" button, the error pops up. I did a quick search but didn't find anything specific on this error for Maschine+. Anyone can help with this? System Version: 1.5.1.0…
-
I’m going through the same problem
the pads went on my first plus after a year. I was able to get a replacement and sent the first one in. I received a brand new maschine plus and was excited as can be. Much to my dismay, since I first fired up the new unit. It gets stuck on startup. Usually after 1-100 restarts it fires up. Today it has been on startup…
-
Maschine plus Stops Working after Update FEB 2024
Good morning, I saw that I was not the only one who had this "stuck at splash screen" problem after the last Maschine plus update. I opened a ticket on customer service. They tried to help me by giving me the same procedure found on the forum (with the file to add to the SD card) So they sent me to the hardware service.…
-
Maschine+ transport control problem!
Hello! Just recently on the M+, I think since the latest update, I'm having this issue where holding SHIFT+TRANSPORT wheel says N/A at the top of the screen, instead of scrubbing through the track as you'd expect. It's intermittent, but it keeps happening. If I select something like the volume or swing tab, then back out…
-
We definitely need to easily edit Program and Bank Change in Maschine Plus standalone!
For those who work with external midi devices it's really essential! 🙏🙏🙏 Maschine+ could be a great sequencer at the center of a midi setup but the lack of this feature is a real dealbreaker for this use... :( I'm not sure where exactly this could be implemented (I guess at the pattern level it would be nice… In order to…