-
Save Settings för Fingerdrumming Hit Order and Choke
Hallo, I'm totally beginner and cannot find where to save the order of Hi-hats I changed on my pads and where to save the settings for the Hi-hat choke group I just made. I'm sure there must be a save possibility so that I don't have to do the settings every time, but cannot find it.
-
Libraries missing, "Kontakt 7 available"
Hi, Bought Komplete 14 and installed it. All libraries are updated/scanned. All latest version updated and no library errors in NI. Komplete Kontrol version 3.1.0 Kontakt 6 player version 6.8.0 Kontakt 7 version 7.7.3 My problem is that when I open Kontakt 7 standalone (From desktop shortcut) I'm able to see all libraries…
-
Which piece of hardware should I buy
I am a dj and am looking to get into producing. I could either buy the Machine studio (with software) for £140 (170$) (used) or the micro mk3 for £80 ($100) (used) with no software. or the micro 3 with all software brand new for £140. What should I do. I have logic and FL but want to use Maschine own software as heard it…
-
Maschine Mikro Mk3 Input lag in Cubase 12
Hello. Recently updated to C12, I like the changes so far but I have run into a annoying issue. I noticed that my NI Maschine Mikro Mk3 (+maschine 2 software) midi controller suffers from slight input lag in C12. So when you press the pad there is a slight lag before you hear the sound between 20-40ms I'd guess. I did a…
-
NI Branded ARM Kontroller
Hi Folks, Is there any change that NI would release an add on ARM based Kontroller than runs all of the software of Maschine+ but with updated hardware? I am thinking about a modded Orange Pi 5+ that connects via USB to Maschine MK3 and Maschine+
-
Maschine Mikro MK3, shift button sticks?
So, I'm not quite sure what is happening here, or if it's something I'm accidentally doing? Basically, if I'm jamming on the Mikro, hitting SHIFT + Any Button, let's say SHIFT + Record to count myself in; sometimes the shift button gets stuck to its engaged position. It isn't lit up, but the controller starts responding as…
-
Using the Smart Strip in Midi Mode
Hey, I'm using the Maschine Mikro MK3 in Midi Mode to control Ableton Live. Is there a way to use the Smart Strip to control different effects? For example I assigned the Midi command of the touch strip to my EQ frequency. Now I want to assign it to my Delay to, for example with a different combination. Is that possible?
-
Second hand MK3
Hello Team, A big question is how I can buy a new serial number for my second hand MK3 Willing to complete my access :)
-
How long does it usually take to register a used maschine?
Hello! I bought a Maschine Mikro Mk3 at a second-hand store. I have sent the hardware serial number and a photo of the card. It's enough? How long do they usually take to respond?
-
Maschine Mikro MK3 Stuck on ‘Busy… Loading?’
Hey all, this is an issue on two separate PCs (windows 10 and windows 11). I think I’ve drilled it down to Kontakt instruments.. Basically, when I try to load a Kontakt instrument from the browser on Maschine 2, my Mikro MK3 screen shows ‘Busy… Loading’ forever, and I have to close Maschine 2 and relaunch to get it…
-
Does anybody has experienced Mashine Mikro mk3 Frezzing?
I been experienced hardware freezing since i bought the Maschine Mikro MK3, i been trying with 2 computers and it keeps happening, the NI suport tool couldnt track the problem y the suport was not enogh, a friend of mine also exp the same problem. This makes me doubt about jaming o performing live with it
-
NI Maschine MIKRO MK3 software problems appear, who can give the anwser!
It's not compatible with Studio One6 platform? is it true? when i press this two button, the studio one6-maschine2 as VST, play and stop can't work in maschine2 !!!
-
Confused, Komplete Collection 14 does not include MASCHINE 2 FACTORY?
I purchased a Maschine Mikro, registered and the only new install was MASCHINE 2 "Essentials" … so I poked around and it looks like MASCHINE 2 Factory is a separate upgrade $99. I didn't expect to have to pay again for what I thought was in KOMPLETE Collector … am I missing something? Cheers, Rob.
-
Mikro Mk2 can out-sample Mikro Mk3 : Bring Back Maschine’s Signature Manual Sampling Mode
Okay, im sure youve seen my shortcut idea posts. I was looking for official notes on the Maschine 2.18.3 update, but found no literature. But, in order of priority, can we get the signature manual sampling back on the mikro? There should be no reason my mk2 can out sample the mk3. This is maschine’s bread and butter.…
-
SHIFT + * = Favorite Sound - Mirko Mk.3 / Does this work for you?
Hey, I just started using the mikro mk3. I watched all of the tutorials and read the owners manual. I wanted to favorite a sound (for the first time) today, but the “SHIFT + *” shortcut didnt work for me. Is anyone else running into this issue? The button works, it sends me to favorites list, but the SHIFT command isn't…