-
[v1.6.0] MASCHINE PLUS/MK3/MIKRO MK3 Ableton Live 11 MIDI Remote Script
MASCHINE PLUS, MK3 & MASCHINE MIKRO MK3 total integration with Ableton Live 11+ (Windows & Mac OS) Introduction: This Control Surface/MIDI Remote Script, providing total integration for Ableton Live 11, was exclusively built for MASCHINE MIKRO MK3, back in March 2021, but compatibility and same functionalities are now…
-
Routing Play Series Drums to Multi Outs
If you've interested in routing your Play Series Drum Kits to individual output channels...you're in luck! Load your Play Series Drum Kit on Pad 1 of a Group and follow the steps below VERY CAREFULLY in the Maschine software or your Hardware Controller (Maschine MK3, Maschine+, or Mikro MK3 : Step 1: Set up "Multi Outputs"…
-
Automation not working when using knobs on Komplete Kontrol mk2 in Maschine
Hi, I just purchased a Maschine Mikro I try to record an automation int he software. I can move all parameters with the knobs on my Komplete Kontrol 88 Mk2 in plugin mode. However, automations do not get recorded this way – only when I change the parameter using the mouse?! I enabled the Auto Button on the Maschine and…
-
Change Controller template without software?
I was wondering if there is anyway I could change the template I was using on my maschine mikro mk3 without the software. I would like to do this because then I could on the fly change octave in midi mode. If there's a way to change octaves in midi mode on the mikro without this work around that would also be cool too.
-
Maschine Mikkro Mk3 Stopped Responding
I was using my Mikkro for days now and everything was fine. I needed to relocate so I shut down the laptop, unplugged the cables, went upstairs, plugged it back in and now the device isn't working. Its 70 degrees out, there was no static electricity or anything unusual in my shutting down. The last thing I did is stills…
-
Mikro Mk3 pads no sound or tactile response
Mikro Mk3 Pads 1/3&4 do not work when pressed in any mode. All pads lit. Any ideas? Thanks!
-
dead pad on a Mikro MK3
I have a pad that does not light up when triggered. It seems to be dead. How do I do factory reset on Mashine Mikro 3?
-
My Maschine mk3 is triggering pad 11 randomly when I play... any suggestions?
When I play or record, my Mikro mk3 throws the sounds on pad 11 randomly into the mix... and I mean randomly. It is not happening after a certain amount of time or after hitting a certain pad. I am currently on MacOS 14 on both of my computers, but it happened on MacOS 13 as well. MacBookPro M2 16 RAM // MacMini M1 16 RAM.…
-
Is it possible to load the demo song from a kit?
I wanted to load the demo song a kit plays when selected to see how the pattern looks (if that makes sense) I appreciate any help, Thanks!
-
New Maschine Mikro Mk3 not recognised with Mac M1 Silicon Sonoma
Hi All I have just purchased a new Maschine Mikro Mk3, registered it and downloaded/installed the Maschine software. When I plug it in, the light demo flashes and the LED flashes for a few seconds, then all goes dark. I then run the Maschine software but nothing shows up in the hardware settings. The controller also does…
-
NIPatcher - Tool to modify Maschine (MacOS)
Hello! I'll try to keep this as short as possible: (KK video for now, will add a Maschine one later) NIPatcher is a tool to modify Maschine app and plugins to add functionality to hardware or improve annoyances of the GUI interface. The goal is to have an easy way for users to apply mods/hacks that have been shared on the…
-
Would you be interested in being able to navigate in Ableton's browser view using Maschine Hardware?
Hi, I upgraded the Native Instruments' Templates for Ableton to browse categories, folders, items and load them in tracks using main encoder on Maschine JAM/MK2/Mikro MK2/MK3/Mikro MK3/Studio. At first it was for my own usage, but would you be interested in getting this? If you have other feature requests that are missing…
-
What's the point of maschine mk3?
Hi all I'm looking at getting a groove box of some kind. At the moment it's between maschine mk3 and mpc one. I read that the maschine mk3 needs a computer with the machine software to work and it got me wondering. Why buy the machine mk3 for over £400 when you could get the mikro for less than half the price? You have to…
-
Is 'Maschine 2 Essentials' + 'Maschine 2 Factory Library' the same as "Maschine 2" in 'Nat. Access'?
I apologize b/c I had a similar question a while back, but now I have a new PC and just wanted to double check. Since I had 'Maschine 2 Essentials' first then upgraded, my 'Native Access' shows 'Maschine Essentials 2' & 'Maschine 2 Factory Library'... In the tutorial videos it shows "Maschine 2" in 'Native Access', but I…
-
Why are there 2 different shortcuts available, and the '64-Bit' one isn't the one on desktop?
When I install a program, there'll often be a shortcut made on the desktop or when I click on the "windows" icon; I can see the newly installed and create one. I realized sometimes there's another shortcut available in the "recent". (ex. I installed 'Maschine 2' and it put a 'Maschine 2' shortcut on the desktop. I later…