-
Maschine 2 AND Machine 3 Software Running on the same computer?
The title pretty much says it. Currently I have both Traktor 3 and Traktor 4 installed on my Macs. Will I be able to install the updated Maschine 3 software while keeping the existing 2 installation of 2.18.4 or will 3 replace that installation. If it replaces it, at the current time I have no reason to upgrade until I see…
-
Installing Maschine Mikro Mk3 on a late 2013 27” iMac running OS Catalina
I have an S49 Mk 2 Keyboard and am now considering purchasing a Maschine Mikro Mk3 and would like to know if anyone here has been successful in installing this Maschine hardware on a Mac running OS Catalina 10.15? Any info would be appreciated. Med Vänliga Hälsningar
-
Kontakt instrument only playing loop in Maschine
Greeting, I am trying to load Spotlight collection : india, a kontakt instrument into maschine. I particulary want to be able to play the tabla on my Mikro MK3. I cannot find a way to load one-shot or make the instrument work as i always end-up with loop loaded on my pad. Any clues on how to make it work. Thank you for…
-
Bought and registered mikro mk3, but cannot find any Maschine software.
I recently bought maschine mikro mk3 and registered it, but there isn't any maschine software in my native access. I checked serials in my account, but cannot find it at all. I also restarted & reinstalled the NI access app few times, but it wouldn't appear. Does anyone knows how to solve this issue?
-
Switched from MK1 Mikro to MK3 Mikro / Arpeggiator Sequences
Hi @ all, I just switched from Maschinen Mikro MK1 to MK3. With the MK3 Micro I miss the option of selecting the sequences in the arpeggiator or I can't even find the option. Has this been completely removed? If I connect the MK1 Mikro again, I can find the arpeggiator sequences immediately. You could even adjust velocity…
-
Ending software support for some earlier generations of Maschine (Solutions for Long time users)
so… its simple. we're either not going to update and NI loses some of its creators and we start a whole Maschine 2 counter culture. ORRRR, NI brings the functionality of the older hardware/software to the new stuff and everyone is happy. its pretty simple. I made a video talking about the pros and cons of the maschine…
-
Using Midi mode to control Presonus Impact XT
Maschine 3 Mikro MBP M2 - OS Sonama Presonus Studio One 6 (Professional) I just bought Maschine 3 and my first use case is I want to control the pads in Impact XT within Studio One DAW from the Maschine 3 Mikro. I've put it in midi mode and selected Maschine as the instrument controlling Impact. I can see midi messages…
-
Save Settings för Fingerdrumming Hit Order and Choke
Hallo, I'm totally beginner and cannot find where to save the order of Hi-hats I changed on my pads and where to save the settings for the Hi-hat choke group I just made. I'm sure there must be a save possibility so that I don't have to do the settings every time, but cannot find it.
-
Libraries missing, "Kontakt 7 available"
Hi, Bought Komplete 14 and installed it. All libraries are updated/scanned. All latest version updated and no library errors in NI. Komplete Kontrol version 3.1.0 Kontakt 6 player version 6.8.0 Kontakt 7 version 7.7.3 My problem is that when I open Kontakt 7 standalone (From desktop shortcut) I'm able to see all libraries…
-
Which piece of hardware should I buy
I am a dj and am looking to get into producing. I could either buy the Machine studio (with software) for £140 (170$) (used) or the micro mk3 for £80 ($100) (used) with no software. or the micro 3 with all software brand new for £140. What should I do. I have logic and FL but want to use Maschine own software as heard it…
-
Maschine Mikro Mk3 Input lag in Cubase 12
Hello. Recently updated to C12, I like the changes so far but I have run into a annoying issue. I noticed that my NI Maschine Mikro Mk3 (+maschine 2 software) midi controller suffers from slight input lag in C12. So when you press the pad there is a slight lag before you hear the sound between 20-40ms I'd guess. I did a…
-
NI Branded ARM Kontroller
Hi Folks, Is there any change that NI would release an add on ARM based Kontroller than runs all of the software of Maschine+ but with updated hardware? I am thinking about a modded Orange Pi 5+ that connects via USB to Maschine MK3 and Maschine+
-
Maschine Mikro MK3, shift button sticks?
So, I'm not quite sure what is happening here, or if it's something I'm accidentally doing? Basically, if I'm jamming on the Mikro, hitting SHIFT + Any Button, let's say SHIFT + Record to count myself in; sometimes the shift button gets stuck to its engaged position. It isn't lit up, but the controller starts responding as…
-
Using the Smart Strip in Midi Mode
Hey, I'm using the Maschine Mikro MK3 in Midi Mode to control Ableton Live. Is there a way to use the Smart Strip to control different effects? For example I assigned the Midi command of the touch strip to my EQ frequency. Now I want to assign it to my Delay to, for example with a different combination. Is that possible?
-
Second hand MK3
Hello Team, A big question is how I can buy a new serial number for my second hand MK3 Willing to complete my access :)