-
Komplete Audio 6 MK1 Main Output (1+2) causing distortion / bitcrushed sound from headphones.
Hello! As stated in the title I'm having a weird issue (only occured recently) where the audio coming out of my headphones is distorted & bitcrushed. It was previously working fine, and occurred for the first time a few weeks ago, seemed to correct itself temporarily, and has happened again. If I switch the output audio in…
-
Komplete Audio Mk1 - poor performance on win 11
Have been using a Komplete Audio 6 Mk1 quite happily for some time under windows 10. I've just done a fresh win 11 install on another SDD and I'm surprised to find the latency is about double what it was under windows 10. The test in the ASIO control panel gives around 350 us and remains steady in win 10, whereas it gives…
-
Komplete Audio 6 (KA6 Mk I) Audio quits until power cycled
My KA6 MK I's audio randomly quits working. When I unplug the USB cable and plug it in again, the problem is temporarily solved. Sometimes I notice it is not working just after starting my computer, other times it quits after sitting for awhile. It used to happen very infrequently, now its every day. This mildly annoying…
-
Maschine Plus + KA6 Mk1 SPDIF issue
Hello everyone! I have an issue on using KA6 Mk1 with Maschine Plus (Maschine hereinafter) while developing the following signal flow. KA6 is connected to Maschine via USB. I route Maschine's Ext. Stereo Out 1 to KA6 SPDIF Out that is detected as Outs 5-6 in Maschine. KA6 SPDIF Out is connected to Arturia Audiofuse SPDIF…
-
Komplete Audio 6 Mk1 compatibility with Mac OS Big Sur and M1
Hi guys, I have a Mac mini i7 3.2GHz unit with 32GB RAM in on Catalina (OSX 10.15.7), and run Maschine as principal DAW system and many 3rd party plugins VST3/AU. I also use a Komplete Audio 6 original Mk1. I know there were lots of people worrying about the M1 Mac with the Big Sur upgrade and thereafter. My question is…
-
Komplete Audio 6 MK1 - Which driver and other software needed to run on Windows 10?
Hi all, I record a podcast and recently switched to riverside fm. I use an Audio Technica ATR2100 XLR mic and want to use it with mu old Komplete Audio MK1 that I have laying around to record my podcast in riverside. I downloaded a driver but am not sure if i have the correct one and other software / updates I might need…
-
Komplete Audio 6 (MkI in this case) and the Mac Keyboard
Hi All I have just installed a new system: Mac Studio M2 Max / OS 13.5 (Ventura) / running Logic 10.7.8. To my amazement - and horror - it appears I now have no access to the Komplete Audio 6 output volume via the Mac's keyboard (F10 / F11). Can anyone confirm this troubling news? If this is indeed the case then it's a…
-
Komplete Audio 6 MK1 Ventura support
Hi, Is it there anyone over here that has tested KA 6 MK1on MAC OS Ventura? The information on the NI article is a little bit confusing to me as they don't explicitly say it's supported, but it's neither on the excluded list. Best regards,
-
Connect MPC Live to Komplete Audio 6 MK1
Hey guys, I've got a pretty basic set-up question here: How do I connect my MPC Live to the Komplete Audio 6 (MK1) with active speakers (KRK Rokit 5)? The only way that seems reasonable to me is connecting the MPC to Input 3/4 on the Komplete 6 with 1/4" TRS cables and then setting "monitor on" to 3/4 accordingly. The only…
-
Komplete Audio 6 MkI driver
Hi all I'm running Win 11 with Cubase Pro 12. Computer specs should run Cubase with no issues. E.g 64Gb Ram Issue is that audio starts to break up, really, really bad crackles. If I'm in Cubase I simply disconnect Komplete Audio 6 and then re-establish the connection in 'audio connections'. It'll then work fine for a while…
-
Komplete Audio 6 3/4 Input worked momentarily
So I just had an odd experience using the 3/4 In on a Komplete Audio 6 in Windows 11. I bought a record player recently with a stereo RCA out, which I used (via a RCA to 1/4" adapters) to connect to the 3/4 In on the Komplete. When I first plugged it in, I was able to go to the 'Input' section of Sound Preference, and…
-
How to turn the s/pdif switch on Komplete Audio 6 MK1
Hi I have a komplete audio 6 mk1 and I'm wondering how to turn the s/pdif switch on with ipad/garegeband? Thanks so much!
-
Getting KA6 MK1 to work with Windows 11?
Hey guys, im hoping someone can help me. I've spent 3+ hours trying to get my Komplete Audio 6 to work. First let me explain the current symptoms. Windows can see my device as an audio output (WMD). I can change from main output to output 3/4 and the lights on my device change to reflect this. I can play some music, the…
-
Why is my Komplete Audio 6 Mk 1 not working on my MacBook Pro M1?
Hi, I'm having difficulties using the audio interface on my MacBook. It doesn't work via Rosetta in Logic either. Does anyone know how to fix this issue?