-
Loop Length Modulation seems Glitched (Kontakt 5)
Hello Experts, I have a rather odd problem, that I'm convinced is operator error: If I modulate the loop length with the mod wheel, the loop length modulation only happens on the root note, the rest of the notes have merely the position of the loop modulated. I have replicated this across a few different samples. What am I…
-
Double triggering occurs with mikro mk3
I am Japanese, so my explanation may be poor. The operating system used is Windows 11 Home 22H2. I purchased a new maschine mikro mk3 and it is double triggered on all PADs. Not in any of the PADs, but in all of them. This phenomenon occurs not only when Native mode is selected in maschine2 software, but also when MIDI…
-
[BUG] Kontrol S2 MK2 pushing the encoder to reset filter no longer working
Hi, this is a bug report; the feature mentioned in the title is no longer working for me. This is not great, as when the encoder is over-rotated, it cannot be brought into the "0" position without bringing up the GUI element and clicking it (seems the increments go out of alignment). NB: I've got it set to "Filter" mode so…
-
Buggy zone envelope zoom and editing
I havnt used the zone envelopes since years, now I tried to use them again and I feel instant why I stopped using them. I used them for different samples, which are inside different groupes (just 4 samples inside 4 groupes) and modulate volume and cutoff of a legacy filter with a zone envelope each, all within sampler…
-
Kontakt 7 Player Hijacked my Kontakt 6 instruments?!
Hello, I have a huge problem. Last week Native Access installed Kontakt 7 Player with the Scarbee and Rickenbacker updates. Now when I open previous projects in Maschine all of my (full version) Kontakt 6 instances open in Kontakt 7 Player demo mode... I've tried unchecking Kontakt 7 in the plug-in manager and also…
-
M 32, Maschine 2, NI Accessibility Helper and Bitwig 4 / 5 Studio MIDI Output Error
When opening Bitwig I get the ever popular MIDI Output Error. Strangely I went through the steps outlined here to no avail; https://www.kvraudio.com/forum/viewtopic.php?t=577541 After getting frustrated I started to kill the NI Services, one by one and restarting Bitwig while still getting the error, nothing worked until I…
-
M+ bug - touchstrip not working ( - after peaking 100% cpu??)
I have experienced several times that touchstrip for perform fx stopped to work during my jam. "touchstrip engage" was still working on the knob, but not thru touching the strip. What is bad news during any live jam, right:) I suspect and suggest to test this scenario - when / if I peak 100% cpu, even for a very short…
-
Komplete Kontrol 2.9 Browser stops working
After updating to Komplete Kontrol 2.9 on my S61 MK2 keyboard, every time I hit the SHIFT button the keyboard browser gets locked. The encoder wheel will cycle through the sounds in the browser but the browser display is locked. I have to restart the keyboard to get the browser working again. Does anyone have any…
-
Playbox not being installed after displaying installation successful
I tried to install Playbox today and even though Native Access shows it as installed without a problem (green tick), it shows up as not being installed when I restart Native Access. Komplete Kontrol and Kontakt also don't show it. I am able to install any other plugin just fine. OS: Windows 11
-
is there a "place" to report mistakes in manual?
good morning, beside many wrong translations there´re also other things wrong in the (german) TraktorPro3-manual is there a place to report them? and NO, it´s not a typical german behavior in my case, it´s something that makes me angry and sad, so I simply offer my help regards The Sarge!
-
Multiple instances of NI products across different drives
I'm having a nightmare. I got a new PC and added my SSD from my old setup with all my NI products installed on it. I've been trying to get them all in the same place: C: (SSD) for applications and VSTs, E: (SSD) for content, F: (HDD) for downloads. It's in a real mess and I can't update or repair any of them. I'm reluctant…
-
Assigning parameters from traktors12 to modifiers causes multiple assignements
If I drag modulator to an effect parameter, multiple destinations are added randomly, up to 4 at once, even parameters from the modulator itsself. In the example, I just bind Reverb Dry/Wet, but also Reverb Mute was assigned with it. It is also happening in Standalone so it is not DAW specific as plugin. (this test was…
-
Old projects aren't loading Komplete Kontrol correctly
Opening Komplete Kontrol in an old project loads this empty page. If I double-click on the preset it opens correctly, but I lose all my settings and the effects chain I had saved. Logic Pro 10.7.7 M1 MacBook Pro Ventura 13.3.1