-
My Maschine Mikro MK3 is not detected as midi device anymore, Can this be Hardware failure ?
I use Maschine usualy as a pluggin in Reaper, with my MikroMK3 set as a midi controler. Today when I tried to add Maschine in a track in reaper the controler didn't turned on. I tried to reinstall controler editor, then the driver, then Maschine itself but nothing worked. Finaly I found that the NIHhostintegration agent…
-
Slice Option Missing from Maschine2 UI
I'm following a video tutorial (image on the right) and when I click the Sample Edit button, I get no slice options (image on the left). Any reason why? Thanks!
-
Midi cc #80 Issue With Plug-ins
Gear: - Maschine + Controller Mode Ony - Circuit Tracks (midi track) For additional Knobs/Pads After some experimentation, I have narrowed it down to this : Midi cc#80 does not send midi thru to any of my VST plugins. The Maschine MK3 DAW does accept midi cc#80 if it is something in the daw other than an instance of a VST.…
-
Programming synths from M+
just bought the Maschine plus, I used to used Maschine back in 2009 I bought it day one and I loved it..after years in the Elektron realm I decided to get back into Maschine since I got along with the MK1 version so well. What I was hoping for was essentially what Maschine used to be but standalone and I’m ver pleasantly…
-
Will there be a version 2 update to Maschine+ or only a version 3 upgrade?
As this discussion is running for a while now, I really would like to know if NI will (also) release the promised update for M+ version 2 instead of (just) version 3 of Maschine SW? Why I’m asking? Simply because we shouldn’t be forced to upgrade to Maschine 3.0 to get the known bugs fixed. From the ‘previous’ change log,…
-
Not all expansions I own show up in NativeAccess
I moved from an old Mac mini i7 to a new one with Apple silicon M4. I installed NativeAccess on the fresh OSX system. Now, not all expansions which I own are shown in NativeAccess. I already removed the NativeAccess.xml and let a new one build, no change. What can I do? What can be the reason? Thank You very much, Frédéric…
-
How do i factory reset my Maschine MK 3?
Maybe i'm just tired, but i can't find a straight answer. I need to return my Maschine MK3, so obviously i need to wipe my settings / content. But i can't find how, and the only answer that i have found was some A.I. generated nonsense that was no help at all. Just to be clear, it is not the Mikro or the Plus, just the…
-
Maschine interfering with Media Players - Seeking Help!
Hi everyone, I'm having a really frustrating issue with Maschine and my media players, and I'm hoping someone in the community might have some insights. Whenever I open Maschine , all the media players on my computer stop working correctly. They either won't play at all, or the audio is distorted/choppy. The problem…
-
Maschine MK3 - REMOVE REGISTRATION
How do I get this done. I just bought the unit from a guy and he is not available to give me the token. I have not been able to use the unit for 10 days because NI support doesn't exist. How can I get in touch with someone to register my Machine, so I can use it. Thanks
-
Buying a used Maschine +
Hey Dear Community, I have an offer for a barely used Maschine + for 630€, she said she never got to use it so she doesn’t need it anymore. Almost half the price is kinda suspect for a barely used hardware, so of course I will test it thoroughly before purchasing it. My question know is what things I should test and check…
-
How do I correctly use the software?
I just bought my first ever Drum maschine the Maschine Mikro mk2. I have never produced music at all which makes the software part kinda tricky. I have downloaded some samples and I wanted to know what I have to do to play these sounds by pressing these buttons on the maschine.
-
Maschine Plus as Open Source like Synthstrom
Maschine Plus going open-source would empower the community, just like Synthstrom did with the Deluge firmware. Custom firmware built with i.e. Reaktor could unlock new creative possibilities, gain innovation and collaboration—a true win-win.
-
No Audio output when I ignored a file.
Good evening, Last night I had to perform at a party, everything I needed for the set iv'e put into a project. Group A,till H where used. The moment I turn on the maschine I got the notification: "SampleName.wav could not be found", so I pressed ignore and from that moment I couldn't play any samples from group C till…
-
Roland TR-6s or Machine Mk3 with Traktor
Hello, I'm thinking about getting a simple drum machine like the Roland TR-6S to use with Traktor. After some research I came across Machine MK3. What would you recommend to a beginner? I actually want to add my own drums to existing tracks (change them). Is the Machine MK3 a bit overkill for that? Can Machine replace the…
-
How long can I expect a response from the support team?
Last sent a message on december 26th. Will I be expecting a month for a response?
-
Maschine+ not connecting to NativeId
Hello, I am trying to begin using my brand new Maschine +. I successfully connected to wifi network and I am trying to connect to my native Id account. The device does not load QR code and it does not allow me to log to my native ID account. Do you have suggestions to fix the issue?
-
Loosing chanel
Good morning. Is anyone having this problem? Since updating my instruments I’m loosing the left Chanel after about 30 seconds and it’s really annoying. I’ve checked if my subscription is active and paid and all is in order. It was all good yesterday. I’ve also checked if it happens on my VST’s and it doesn’t. It’s only on…
-
The Grandeur, Upright Bass, Studio Drummer, Session Horns on MPC Key 37?
Hi Folks! I'm interested in NI acoustic products like The Grandeur, Upright Bass, Studio Drummer, Session Horns etc. Are they all compatible with the new mpc key 37? Thanks a lot, Patrick
-
Maschine Studio windows 11help me out
only plays when on preference screen
-
Your Product is Missing the Base Product For This Serial
I recently bought Maschine 3 and every update that Maschine offers with it. No matter how many times and various way I enter the serial for Machine 3 it constantly comes back "your product is missing the base product for this serial" I'm not sure how that is possible when I have bought every option of Machine 3 software…