Help, Learn and Connect

Recent discussions

Mapping Kontact in Studio One
Hey Native Instrumites I've been working through a fresh install of Studio One Professional 6.6. I recently purchased a new to me M Audio Oxygen 49 and was trying to map buttons and faders. I was able to map the keyboard to Studio One in built instruments like presence then spitfire instruments. One of the techs said the…
Issue with Analog Lab in Komplete Kontrol 3.4 runing on Studio one 7
Hello, I have a display issue with the last version of Komplete Kontrol (3.4.0) It happens when i open KK in Studio One 7, and then open Analog Lab Pro inside KK (i do like that for nks support reasons). Ths VST interface is bugging and not usable. See screenshot. But, It only happens on Studio one 7: it works well in…
MASCHINE 2 Plugin in Studio One - 'could not be loaded' error for Instruments
Hello. In the MASCHINE 2 app, I am able to load instruments, but in the MASCHINE 2 plugin within Studio One, I get the message '** could not be loaded.' Groups, Sounds, Loops, and One-shots load without any issues. However, I cannot load FX that seem to be associated with the instruments. If anyone knows the cause and a…
Maschine plays all drums on channel 1 when assigned separately.
So, not understanding something. After the updates to Maschine 2, when I send the sounds to Studio one V6/7 to their individual channels it used to separate every sound on it's own channel. Now when I separate all the drums play on channel 1 and everything else plays on their own channel. So when I mix the drums lets say 1…
Kontakt7 Multiple outputs in Studio One Fix
I have a solution to your problem... and the problems of many other people! This is a solution with the addition of channels in S1 You need to open a clean Kontakt and open the "Outputs" panel -> click on the PLUS button to add channels near the "Outputs" label on the Output panel. Next, in the "Quantity" field, specify…
Kontakt only intruments playing when NOT selected in my DAW
Hi all, I just installed Komplete Start yesterday along with Kontakt 8. Everything was working really well yesterday in a session until I saved, shut down, and went back to it later. What is happening now is, if I either have no tracks selected or if I have a non-kontakt track selected, the playback is totally fine but…
Kontakt crashes in Studio One occasionally with "kernelbase.dll" error
The issue seems restricted to Kontakt specifically. I have a huge project, but I've tested loading a blank project, and it happens too. It's so hard to figure out what triggers it, because many times its fine. When it breaks, it screws me up big time and delays me because I haven't been able to figure out how to fix it.…
Newbie needs help W/ S61 Browser not working
I am pretty new to keyboards and midi ,I have a new Mac Studio running 14.6.1, my Daw is studio one V7. with my S61 I believe I have updated all the software as well as the S61. The Daw functions properly on the S61 world Superior Drummer and other virtual keyboards in the daw. But I can't get it to work with Kontakt 8, If…
Maschine 3 - VST - Export MIDI/Audio Drag and Drop
With Maschine 3 as a VST in Studio One I don't see the option to drag and drop MIDI/Audio to drop the pattern/clip into the host. Not sure if there is another discussion thread with bugs or how to 'officially' submit a potential bug?
Using Midi mode to control Presonus Impact XT
Maschine 3 Mikro MBP M2 - OS Sonama Presonus Studio One 6 (Professional) I just bought Maschine 3 and my first use case is I want to control the pads in Impact XT within Studio One DAW from the Maschine 3 Mikro. I've put it in midi mode and selected Maschine as the instrument controlling Impact. I can see midi messages…
Problem with volume settings using Kontakt with Studio One
Hi. I'm a newbee with Kontakt and I'm having a strange problem using Kontakt within Studio One. Whenever I load an instrument into a track in S1 the volume on the track automatically goes to -117.3 and then flips between 117.3 and 115.3 - continually. I cannot raise the volume on the slider - it keeps flipping back and…
Mobile Production Suggestions
I'm currently looking into options for a setup I can take with me to work on music when traveling. I currently use a Mac Mini to run my DAW (Studio One). I have Komplete, virtual instrument libraries etc. housed on an external drive. I used to primarily use a 2020 MacBook pro, but was having trouble running Komplete when I…
S88 MK3 issues with Studio One 6.5
I have no physical control of my S88 mk3. It mirrors what I see in S1 but I cannot control anything from the keyboard itself, like browse or hit play, stop "transport controls". I have followed all steps, have the latest firmware. Has anyone faced this and could you possibly point me in the best direction to fix this.
How to add a sound track for recording the NI Traktor S4 DJ sounds in Studio One6?
I'm a music producer, the software is Studio One6 Professional Version, and i bought a NI Traktor S4 from the company Native Instruments, I want to create a stereo track for NI Traktor S4 in Studio One6 , using for controlling the Traktor S4 DJ audio stream volume and recording the DJ sounds independently by Studio One6, I…
Opening support ticket
How in the Hell does one file a bug report with NI these days? I see noting on their "support" pages where I can notify them of a dead-looping problem in both Kontakt and Battery under Studio One 6.
Huge lag when close project in studio one
Since ~2 months ago, everytime I use NI kontakt / Massive X / NI plugins in a Studio One project, when I close the project, it will be ~5-10 second lag and I cannot make any operation. But if I do not use any NI compomnent in the project, there will not be any lag when I close the project. Is there any conflict between NI…
Replika XT doesn't generate output anymore after switching on the ping-pong effect.
Hi, I'm facing the problem that "Replika XT" just works until I toggle the switch from "Standard" to "ping-pong". Afterwards the output meter stays empty and the effect ist gone. Toggling back to "standard" doesn't help. Even a restart of the DAW doesn't help, the effect is gone. It doesn't generate output anymore. I have…
Komplete Scales / Chord Sets module sends invalid random MIDI OUT
I am using most current version of Studio One Pro. I have a track and it is assigned to Komplete Control. The MIDI in for this is a MK3 49 (hardware). I select the Gentleman piano VST. I enable Scale and choose Chord Set. (It actually does not matter what I select, the outcome is the same no mater what the configuration…
Notes hanging with MK3 keyboard in Studio One
Hello. I recently purchased an S61 MK3 keyboard to upgrade my setup from my MK1 keyboard. I'm getting a problem with Studio One with hanging notes and I have to send a manual All Notes Off event from the DAW to fix that. Further (though limited) investigation revealed that it happens with Kontakt 7 and maybe Kontrol too.…
Kontakt freezes DAW when loading some libraries
Hello, I have a big problem (actually there are 2 problems which can be correlated). When loading, for example, Session Guitarist - Electric Sunburst Deluxe, the whole DAW freezes for about 2 minutes. Then everything is ok until the next time the library is loaded. I made batch re-save, enabled samples loading in…

Sign in to unlock member-only content

New questions

Possible malware?
Hi there, My antivirus has captured some files with names like this one: Drop.Win32.WinDirControlSet.716319, and associated it as being related with Kontak 8 and iZotop installation paths. They are for archives. See the picture. Do you guys no anything about that issue? I'd appreciate your help. Best,
Can I save current set up on Kontrol S61 Mk3 before factory reset?
My MIDI through has simply stopped functioning. I had this problem before, mentioned in an earlier discussion, and the 'answer' resolved as a factory reset. I guess a factory reset will fix it again, but then I'll lose various settings, which is rather annoying. Is there a way to save my current set up before factory reset…
Kontakt Script to change Instrument and keyrange with modulation
This is an interesting problem. I need a script to change Kontakt Instruments depending on keyrange, and the keyrange will dynamically change with modulation CC#1. This is to select which notes along a guitar fretboard are to be played according to fret positions 0 through 17 assigned by mod wheel. One monophonic…
S88 loses Logic
In Logic, when selecting tracks with different instances of Komplete Kontrol, the S88 M2 does not indicate what instrument is active in both the screen and the lighted key indicators. Sometimes it does, but moving track to track they change very slowly and mostly not at all. Is there a solution? Maybe an instruction for…
Abbey Road Drum Libraries MIDI-mapping
Hi, I need a way to use the same MIDI-mapping across the whole range of Abbey Road (and Studio Drummer) Libraries. They all contain the possiblity to save optional mappings, but I can not find a way to use those across the libraries. Attached picture shows how I created my own mapping and saved it, but it does not show up…
Can I export sample loop & release metadata from kontakt 8?
I am sampling a pipe organ and making a VST instrument. I like Kontakt and I would prefer to do it with it. The thing is, I have the chance to give it to a music museum in Barcelona. They have their own sampler there and I need to send them the samples with its loop and release metadata, so we can port it to their…
Kontakt7 libraries viewer is initialized when closed and opened.
I am using FLStudio2024. If I close the window once and reopen it with the STRINGS ENSENMBLE Instrument open, the STRINGS ENSENMBLE in the Libraries is not selected. (It is the first state where nothing is selected). This did not happen when I was using Kontakt5 before, but I wonder if there is a solution to this…
Enabling flux mode in loops
Hi! I have been really enjoying using Traktor Pro for the past two years (version 3 and then later 4). I use it with either mouse/keyboard, or a Numark Mixtrack Pro 3 and a midi mapping file found off the internet and edited to fit my needs. However there is something that has always bugged me about loops and flux mode.…
Modular Icons Sequencer Notes
Correct me if I’m being a dummy, but you can set the key & scale and lock this in the sequencer. Say I did E Minor. When you go to nudge the notes, shouldn’t this be programmed to minor notes only? It’s a music theory question really. For example, you’ve set the seq to e minor, is selecting maj 3rd or all majors make any…