Maschine MK3

Maschine Hardware Channel Mode Output Selection Not Updating Software Mixer Outputs
I’m running into an issue with Maschine where the hardware and software do not seem to be communicating properly when assigning external outputs. When I’m using Channel mode on the Maschine hardware, I can navigate to the output section and select different outputs, such as External 1–16. However, changing the output from…
Native Instruments Changes Priorities
From the Official Site - Music Creation - Hardware page: BEFORE: ___________________________________________________________________________________________ ___________________________________________________________________________________________ AFTER:…
Maschine+ Loopstation
Q:Translation inserted by Moderator (translation by DeepL) Is it possible to use the Machine+ as a loop station? If so, how? Community Code of Conduct - Please read before posting : Quote : Our community is currently only available in English. Please be advised that we retain the right to remove any posts in languages…
Minta Foundry NKS
One I made earlier for Minta Foundry Patina with presets and graphics. Logo/banner used is from the original online app version as I prefer it, but I have put some alternative logo graphics inside consistent with the plugin release. Primarily for use with Maschine software application. https://www.mintafoundry.com/patina…
Maschine 3 won't start; it freezes on the UI
Q: Translation inserted by Moderator (translation by DeepL) Hi, the Maschine 3 software freezes when it starts up; it gets stuck on “Initializing UI.” I've tried everything, but it won't fix itself. I need help—it's driving me crazy. Community Code of Conduct - Please read before posting : Quote : Our community is…
Someone else have problems with 3rd party nks UAD and Arturia when loading from Kontrol S
I found a weird issue where i wanted to go through effects loaded from both Maschine and Kontrol S MK3 series into empty slots in Maschine 2 DAW The issue what i have is that i have a sampler with a clap sample loaded in the first slot, when i go to an empty slot or want to change the second loaded fx slot, the effect i…
How to roll back to Maschine 3.4.2?
Maschine 3.5 is crashing my computer constantly. How can I roll back to 3.4.2? I followed the instructions in Native Access and it only allowed me to reinstall 3.5.
Maschine Controller In Reason Midi Issue
Strange behavior with Maschine MK3 controller in Reason: Maschine VST in Reason receives midi from MK3 controller, but Reason Sequencer is not receiving midi from Maschine MK3 controller. 1) MK3 controller is being recognized by Reason (in Reason, Machine MK3 shows up in Midi settings as a choice) BUT… 2) It cant detect…
2nd Hand Maschine Mk3 - Software Maschine 2
Morning Folks. Purchased a Maschine Mk3, the seller has went through with the Licence Transfer for which I have the Transfer ID Product Serial Number License Status Expansion - Body Mechanik Expansion - Carbon Decay Expansion - Dark Pressure Expansion - District Xeo Expansion - Drop Squad Expansion - Grey Forge Expansion -…
Not installed items unavailable to install
After an update Native Access required me to repair almost all of my installed products. It wouldn't do a repair all so I had to repair over 300 one by one. However it would not repair my NBPL or a couple of Reaktor items. One was Spark and the other I now can’t recall. I deleted them from the library expecting them to…
How to add instruments to Maschine 3.5?
I'm not able to add instruments to Maschine anymore. What I did: - all updated - full disk access for the required products - erased the "Machine 3" Folder from the application support lib. - re-scanned every PlugIn with Maschine Nothing worked… Any more possibilities? Thx in advance
Maschine+/Mk3: Missing Option to Convert a Single Pattern to Clip – Feature Request
Converting a single Pattern to a Clip in standalone or controller mode is currently not possible. Right now, Maschine+ converts the entire Scene instead. On the other hand, the software can convert an individual Pattern. For workflow continuity, this should also be possible on the hardware. A potential solution would be to…
Making Editing Easier
In Events view, allow Shift + 4‑way encoder up/down to move selected events to previous/next Sound slot (within the same Group), instead of only changing selection. Hello Community, Greetings from Greece! I hope you doing great! I' m a Graphic Designer from Greece and I Love to Make Beats. I' m Producing since 2005 mostly…
Buying used Mikro MK 3
If I buy a used Maschine Mikro MK3, will I get access to any software?
ReasonStudios Rack plugin display is odd
The ReasonStudios rack (VST3) version does not open correctly to allow for selecting device in Reason. It only opens the top 1/3 of the window. Any workaround?

Maschine Hardware Channel Mode Output Selection Not Updating Software Mixer Outputs
I’m running into an issue with Maschine where the hardware and software do not seem to be communicating properly when assigning external outputs. When I’m using Channel mode on the Maschine hardware, I can navigate to the output section and select different outputs, such as External 1–16. However, changing the output from…
Native Instruments Changes Priorities
From the Official Site - Music Creation - Hardware page: BEFORE: ___________________________________________________________________________________________ ___________________________________________________________________________________________ AFTER:…
Maschine+ Loopstation
Q:Translation inserted by Moderator (translation by DeepL) Is it possible to use the Machine+ as a loop station? If so, how? Community Code of Conduct - Please read before posting : Quote : Our community is currently only available in English. Please be advised that we retain the right to remove any posts in languages…
Minta Foundry NKS
One I made earlier for Minta Foundry Patina with presets and graphics. Logo/banner used is from the original online app version as I prefer it, but I have put some alternative logo graphics inside consistent with the plugin release. Primarily for use with Maschine software application. https://www.mintafoundry.com/patina…
Maschine 3 won't start; it freezes on the UI
Q: Translation inserted by Moderator (translation by DeepL) Hi, the Maschine 3 software freezes when it starts up; it gets stuck on “Initializing UI.” I've tried everything, but it won't fix itself. I need help—it's driving me crazy. Community Code of Conduct - Please read before posting : Quote : Our community is…
Someone else have problems with 3rd party nks UAD and Arturia when loading from Kontrol S
I found a weird issue where i wanted to go through effects loaded from both Maschine and Kontrol S MK3 series into empty slots in Maschine 2 DAW The issue what i have is that i have a sampler with a clap sample loaded in the first slot, when i go to an empty slot or want to change the second loaded fx slot, the effect i…
How to roll back to Maschine 3.4.2?
Maschine 3.5 is crashing my computer constantly. How can I roll back to 3.4.2? I followed the instructions in Native Access and it only allowed me to reinstall 3.5.
Maschine Controller In Reason Midi Issue
Strange behavior with Maschine MK3 controller in Reason: Maschine VST in Reason receives midi from MK3 controller, but Reason Sequencer is not receiving midi from Maschine MK3 controller. 1) MK3 controller is being recognized by Reason (in Reason, Machine MK3 shows up in Midi settings as a choice) BUT… 2) It cant detect…
2nd Hand Maschine Mk3 - Software Maschine 2
Morning Folks. Purchased a Maschine Mk3, the seller has went through with the Licence Transfer for which I have the Transfer ID Product Serial Number License Status Expansion - Body Mechanik Expansion - Carbon Decay Expansion - Dark Pressure Expansion - District Xeo Expansion - Drop Squad Expansion - Grey Forge Expansion -…
Not installed items unavailable to install
After an update Native Access required me to repair almost all of my installed products. It wouldn't do a repair all so I had to repair over 300 one by one. However it would not repair my NBPL or a couple of Reaktor items. One was Spark and the other I now can’t recall. I deleted them from the library expecting them to…
How to add instruments to Maschine 3.5?
I'm not able to add instruments to Maschine anymore. What I did: - all updated - full disk access for the required products - erased the "Machine 3" Folder from the application support lib. - re-scanned every PlugIn with Maschine Nothing worked… Any more possibilities? Thx in advance
Maschine+/Mk3: Missing Option to Convert a Single Pattern to Clip – Feature Request
Converting a single Pattern to a Clip in standalone or controller mode is currently not possible. Right now, Maschine+ converts the entire Scene instead. On the other hand, the software can convert an individual Pattern. For workflow continuity, this should also be possible on the hardware. A potential solution would be to…
Making Editing Easier
In Events view, allow Shift + 4‑way encoder up/down to move selected events to previous/next Sound slot (within the same Group), instead of only changing selection. Hello Community, Greetings from Greece! I hope you doing great! I' m a Graphic Designer from Greece and I Love to Make Beats. I' m Producing since 2005 mostly…
Buying used Mikro MK 3
If I buy a used Maschine Mikro MK3, will I get access to any software?
ReasonStudios Rack plugin display is odd
The ReasonStudios rack (VST3) version does not open correctly to allow for selecting device in Reason. It only opens the top 1/3 of the window. Any workaround?

Maschine MK3

Discussion List

Popular Tags