Maschine MK3

Need help!
Not sure where 8 should post this but I need someones help I have a voice recording of someone hacking my phone and are unaware there broadcasting. I have been unable to break it down to understand them..
What to do with my Maschine Mikro MK3, which is stuck in DFU mode
I'm reaching out regarding my Maschine Mikro MK3, which is stuck in DFU mode and not being recognized correctly by Maschine software. I've worked through your full troubleshooting guide and wanted to document everything I've tried before escalating. **USB Connection** - Tested multiple USB cables, including one confirmed…
Maschine Poly Synth - Pulse Oscilators leak high energy. ¿DC correction?
Just decided to give a chance to PolySynth, after years of using VSTs for this range. And I was very satisfied with the easyness of use and specially its clear page disposition of controlls. I will still hold my opinion about sound, as I need to explore more. However, noticed that when using Pulse Osc in widths different…
inMusic FLOW — A Vision for the Next Generation of Music Hardware
From my point of view and my experience working with Akai MPC and Maschine, I imagine the future not as two separate worlds, but as the evolution of both philosophies into a completely new type of instrument. I call this concept: inMusic FLOW A hybrid standalone performance system that combines the strongest ideas from…
Maschine+ Bricked: Stuck in Registration Failed
Hi, I bought a used Maschine+. The seller gave me the license, I activated it on the Maschine, everything was perfect. I decided to do a factory reset, and now here's the problem: when I turn it back on, I connect to Wi-Fi, log in to my account, and it never activates at step 3 and gives me an error message. I read a…
I have bought maschine 3 bundle, it’s shows in my account, but why is it still showing demo mode?
I have bought Maschine 3 bundle. I have even reset my whole computer, but when I install it, it goes to demo mode
What do I do
I recently bought the full bundle version of Maschine, but the problem is it keeps saying Demo, I tried deleting corrupt files like the ai bot suggested me to but the program is stayng saying demo…I don't know if I am doing things right or what but Is there anybody who can help me? because i'm just bout ready to call this…
Maschine Hardware Channel Mode Output Selection Not Updating Software Mixer Outputs
I’m running into an issue with Maschine where the hardware and software do not seem to be communicating properly when assigning external outputs. When I’m using Channel mode on the Maschine hardware, I can navigate to the output section and select different outputs, such as External 1–16. However, changing the output from…
Native Instruments Changes Priorities
From the Official Site - Music Creation - Hardware page: BEFORE: ___________________________________________________________________________________________ ___________________________________________________________________________________________ AFTER:…
Maschine+ Loopstation
Q:Translation inserted by Moderator (translation by DeepL) Is it possible to use the Machine+ as a loop station? If so, how? Community Code of Conduct - Please read before posting : Quote : Our community is currently only available in English. Please be advised that we retain the right to remove any posts in languages…
Minta Foundry NKS
One I made earlier for Minta Foundry Patina with presets and graphics. Logo/banner used is from the original online app version as I prefer it, but I have put some alternative logo graphics inside consistent with the plugin release. Primarily for use with Maschine software application. https://www.mintafoundry.com/patina…
Maschine 3 won't start; it freezes on the UI
Q: Translation inserted by Moderator (translation by DeepL) Hi, the Maschine 3 software freezes when it starts up; it gets stuck on “Initializing UI.” I've tried everything, but it won't fix itself. I need help—it's driving me crazy. Community Code of Conduct - Please read before posting : Quote : Our community is…
Someone else have problems with 3rd party nks UAD and Arturia when loading from Kontrol S
I found a weird issue where i wanted to go through effects loaded from both Maschine and Kontrol S MK3 series into empty slots in Maschine 2 DAW The issue what i have is that i have a sampler with a clap sample loaded in the first slot, when i go to an empty slot or want to change the second loaded fx slot, the effect i…
How to roll back to Maschine 3.4.2?
Maschine 3.5 is crashing my computer constantly. How can I roll back to 3.4.2? I followed the instructions in Native Access and it only allowed me to reinstall 3.5.
Maschine Controller In Reason Midi Issue
Strange behavior with Maschine MK3 controller in Reason: Maschine VST in Reason receives midi from MK3 controller, but Reason Sequencer is not receiving midi from Maschine MK3 controller. 1) MK3 controller is being recognized by Reason (in Reason, Machine MK3 shows up in Midi settings as a choice) BUT… 2) It cant detect…

Need help!
Not sure where 8 should post this but I need someones help I have a voice recording of someone hacking my phone and are unaware there broadcasting. I have been unable to break it down to understand them..
What to do with my Maschine Mikro MK3, which is stuck in DFU mode
I'm reaching out regarding my Maschine Mikro MK3, which is stuck in DFU mode and not being recognized correctly by Maschine software. I've worked through your full troubleshooting guide and wanted to document everything I've tried before escalating. **USB Connection** - Tested multiple USB cables, including one confirmed…
Maschine Poly Synth - Pulse Oscilators leak high energy. ¿DC correction?
Just decided to give a chance to PolySynth, after years of using VSTs for this range. And I was very satisfied with the easyness of use and specially its clear page disposition of controlls. I will still hold my opinion about sound, as I need to explore more. However, noticed that when using Pulse Osc in widths different…
inMusic FLOW — A Vision for the Next Generation of Music Hardware
From my point of view and my experience working with Akai MPC and Maschine, I imagine the future not as two separate worlds, but as the evolution of both philosophies into a completely new type of instrument. I call this concept: inMusic FLOW A hybrid standalone performance system that combines the strongest ideas from…
Maschine+ Bricked: Stuck in Registration Failed
Hi, I bought a used Maschine+. The seller gave me the license, I activated it on the Maschine, everything was perfect. I decided to do a factory reset, and now here's the problem: when I turn it back on, I connect to Wi-Fi, log in to my account, and it never activates at step 3 and gives me an error message. I read a…
I have bought maschine 3 bundle, it’s shows in my account, but why is it still showing demo mode?
I have bought Maschine 3 bundle. I have even reset my whole computer, but when I install it, it goes to demo mode
What do I do
I recently bought the full bundle version of Maschine, but the problem is it keeps saying Demo, I tried deleting corrupt files like the ai bot suggested me to but the program is stayng saying demo…I don't know if I am doing things right or what but Is there anybody who can help me? because i'm just bout ready to call this…
Maschine Hardware Channel Mode Output Selection Not Updating Software Mixer Outputs
I’m running into an issue with Maschine where the hardware and software do not seem to be communicating properly when assigning external outputs. When I’m using Channel mode on the Maschine hardware, I can navigate to the output section and select different outputs, such as External 1–16. However, changing the output from…
Native Instruments Changes Priorities
From the Official Site - Music Creation - Hardware page: BEFORE: ___________________________________________________________________________________________ ___________________________________________________________________________________________ AFTER:…
Maschine+ Loopstation
Q:Translation inserted by Moderator (translation by DeepL) Is it possible to use the Machine+ as a loop station? If so, how? Community Code of Conduct - Please read before posting : Quote : Our community is currently only available in English. Please be advised that we retain the right to remove any posts in languages…
Minta Foundry NKS
One I made earlier for Minta Foundry Patina with presets and graphics. Logo/banner used is from the original online app version as I prefer it, but I have put some alternative logo graphics inside consistent with the plugin release. Primarily for use with Maschine software application. https://www.mintafoundry.com/patina…
Maschine 3 won't start; it freezes on the UI
Q: Translation inserted by Moderator (translation by DeepL) Hi, the Maschine 3 software freezes when it starts up; it gets stuck on “Initializing UI.” I've tried everything, but it won't fix itself. I need help—it's driving me crazy. Community Code of Conduct - Please read before posting : Quote : Our community is…
Someone else have problems with 3rd party nks UAD and Arturia when loading from Kontrol S
I found a weird issue where i wanted to go through effects loaded from both Maschine and Kontrol S MK3 series into empty slots in Maschine 2 DAW The issue what i have is that i have a sampler with a clap sample loaded in the first slot, when i go to an empty slot or want to change the second loaded fx slot, the effect i…
How to roll back to Maschine 3.4.2?
Maschine 3.5 is crashing my computer constantly. How can I roll back to 3.4.2? I followed the instructions in Native Access and it only allowed me to reinstall 3.5.
Maschine Controller In Reason Midi Issue
Strange behavior with Maschine MK3 controller in Reason: Maschine VST in Reason receives midi from MK3 controller, but Reason Sequencer is not receiving midi from Maschine MK3 controller. 1) MK3 controller is being recognized by Reason (in Reason, Machine MK3 shows up in Midi settings as a choice) BUT… 2) It cant detect…

Maschine MK3

Discussion List

Popular Tags