-
Kontakt East Asia plugin use in the Maschine 2 daw
Bonjour, En ouvrant mon plugin Kontakt East Asia dans le daw Maschine 2, mon browser ne me fait plus apparaître mes instruments mélodiques, type Guzheng, Erhu, etc... je ne me retrouve plus qu'avec toute la série de percussions du plugin East Asia. Dois je faire une manipulation particulière? je les vois installés sur mon…
-
Saving custom fx chains in Maschine+ standalone?
Hey, I'm a lil ashamed to say this, but I haven't got the foggiest idea how to save a sound with all its effects on the M+ standalone.. I know I should RTFM but figured one of you would know? It has to be one of those SHIFT menus somewhere, but I am having a hard time finding it Can I save the sound with the whole…
-
Analog Guitar Pedals and Maschine
Hi. I am wondering if anyone has had any experience using guitar pedals with Maschine MK3. I have set them up so a sound is routed out the headphone and then back in to another sound on a new group via line in. While I am hearing the effects, like delay or reverb etc. they are extremely quiet. No mater how much I fiddle…
-
Maschine + "error Loading project failed"
Hi, I'm trying to transfer maschine 2 projects to a Maschine + (wich is not mine), but no matter what i try, i get the same error "Loading Project Failed" I checked the software versions (2.17.5 on both systems), there is no third party VST involved, i saved the project with samples, placed the samples in the Sounds folder…
-
Is Plugin Delay Compensation being worked on?
Hello all, I've been working in Maschine for around a year now and I think that the software is really close to be a proper DAW. I love the workflow. However, I think that a lack of Plugin Delay Compensation is the biggest flaw of the Maschine software. Is it being worked on by the developers? In another post I've seen…
-
Brand-new MK3, can't get my sound to work. Please help!
Hi everyone, So I just bought my MK3 but this first day has been quite a frustrating experience. Long story short: I'm unable to get ANY sound by plugging in headphones in the phones jack. I'm on Mac OS Big Sur 11.6. Sony MDR plugged in + sound knob at the back turned on Maschine MK3 as Device (CoreAudio Driver) Input L &…
-
Maschine MK2 Hardware not being recognized with software
I'm having an issue using my Maschine MK2. I completed the full installation and when I startup MASCHINE software my hardware is not being recognized. It stays on "groove production studios" . I followed the NI support steps and figured it might be my firmware out of date, when I open the "device updater" to update my…
-
Used Maschine+ product registration failed
So I bought a used Maschine+ at Guitar Center. Came home, used the QR code reader on my phone to start the registration process. Midway through the process, the QR reader app crashes. This was between the product code being entered and me entering my own account information. So I go back through the process, and now the…
-
why the lock state is not working with effects?
The lock state snapshots are not working with effects. If I take a snapshot and make a new pad and add an effect like reverb and update then return to the original snapshot the reverb is on both pads. If I mute or solo on a snapshot these changes are remembered fine. I can make multiple snapshots and update but every…
-
Foot pedal
Hi there, I’ve been using maschine mk3 for a few years. I love it, easily my favourite piece of gear. I recently started using a foot pedal to stop and start whilst playing guitar. I wish I could figure out a way to program the pedal to restart rather than play. However, I’ve found a work around which is to have scenes set…
-
No aftertouch in Maschine
I made a nice preset in Super 8 where I use aftertouch to give a bit of pitch and filter modulation. Works great in Presonus Studio One. I used the same Super 8 patch in Maschine today and it turned out the aftertouch isn't working. After a while I found out that Maschine isn't supporting aftertouch. Is this for real! Why?…
-
Software vs hardware
Hi all. I'm new to the synth world. I have bought some NI and Arturia gear recently which all comes with software synths. They all sound pretty amazing to my untrained ear. I just wondered are these software synths good for professional recording and do people actually use them? Are there any famous hits that use them that…
-
machine not working in midi mode
For years I've been using mashine in midi mode to play superior drummer and ez drummer as I love the feel of the pads. Today I switched to midi mode and nothing is coming thru. Normal machine mode works fine. I must have changed a setting somewhere but have no clue as to what.... pls help..... working in studio one. I've…
-
If i want to use the same Memory Card in the Controller Mode
hi NI Forum, my Question is the following: if i want to use my m+ in controller mode, what do i need to set as Paths to make the SD Card work in both modes (and not have 2 discs with same data) thanks in advance Adrian
-
Mapping zone on Maschine Plus
Hello I sampled a stylophone with my Maschine Plus and I have a sample with each 44 notes of the instrument, from A1 to F5. I can slice it and apply it to the page so that I can play it in keyboard mode, but C pad plays A1, C# pad plays A#1, etc. I tried to set up root note and range in the Zone section but it does not…
-
Compatibility and software version
I'm in the market for a preowned Mashine Mk III controller and I'd like to know what will I need as far as NI software is concerned? I am running Mac OS 12.6.3 Monterey if this matters. Interested in any recommendations as well. Thank you.
-
The Touchstrip never release.
Hi, all. The touchstrip never release, If the touchstrip Engage is OFF never changes to On when I press the touchstrip, only change the parameters like Frequency or Feedback. I don't know if is a bug or an issue with the touchstrip.
-
FL Studio as a VST in Maschine doesn't work anymore
As soon as I try to load FL Studio as a plugin in Maschine which was working fairly well , and could start this track wiith https://soundcloud.com/kaldosh/angel-master-16022024?si=85ac7f7f004a4e87ba47d6ca6cde209d&utm_source=clipboard&utm_medium=text&utm_campaign=social_sharing which obvisouly was not that stable at the…
-
Does Maschine+ save Reaktor ensembles within each project?
Imagine I am making a track and I load a Reaktor patch from my SD card and use it in the project, then save the project. If I then replace the Reaktor patch on my SD card with a new version, or even delete it, will that affect my already-saved project? Is the Reaktor patch saved within the project or does the project look…
-
Please confirm Maschine can't route MIDI from a VST/AU plugin?
I'm trying to route MIDI output from a VST plugin (Hypercyclic, Tonespace or Reaktor) to another instrument in Maschine and I can't figure this out. Tutorials I've found online suggest using either a physical MIDI loopback cable (??) or the IAC Driver on Mac, but both of these solutions really get in the way. Is there…