-
Maschine + MIDI learn
I think I already know the answer to this but I just want to be sure. Is the Maschine + in standalone able to route external MIDI to internal parameter changes via a learn mode /routing page? It seems like this can only be done if you set up the routing on a computer first but I wanted to check. If it can only be done…
-
I need help with installing the software for my Maschine MK1
Hiii, I recently bought a Maschine MK1 second hand with the installation disc for the software. The past owner told me he removed the license from his account so that I could use the license that came with it. But when I tried to register the license on native acces, they told me somebody already used it… The past owner…
-
get Maschine 2 software
I recently bought a second hand Maschine Mikro MK2. then realised that its not supported by the latest Maschine 3 sofware. it can be run only using Maschine 2 software. However this version is not available for purchase. the owner who sold it is not giving the serial number of the software. i am pretty much stuck with the…
-
My Maschine+ with latest firmware doesn´t show Fm8
The Native support is ebven worse than I could imagine, sio please allow me to ask this question here. How can I locate FM8 on my Maschine+ with the latest firmware? Thanks in advance
-
is there a way to use a 2nd hand maschine+ without registering the serial?
this is the second one I bought in a week. both used. the first wouldn't boot and this one of course already has the serial registered. so am i just stuck at the register screen until support transfers the serial or is their a work around? im about to throw in the towel with this company.
-
Maschine 3.0 user samples libraries thumbnails do not show up.
If anyone has any information about this, please tell me. Is this a bug or does the new version use thumbnails in a different way? now all my user libraries are in the "other" section. In the second version, thumbnails work for me. Windows 11
-
how to access to more than 16 pads
Hello, I cut 70 slices from a sample, and when I send them to a program (bank b, for example), I only have access to the 16 pads from the first bank of slices I created. Is there a way to access the other slices?
-
Maschine 3 with older Mac ?
is there away to download maschine 3 with older Mac I'm feeling left out
-
Maschine+ with or without Maschine 3
Hi, I just get new Maschine+ and I never used groovebox. SO I will learn on Maschine+ to create on groovebox. I thought that the software that comes with Maschine+ is Maschine 3 when you want to connect to computer and record.I think I was wrong. Please explane me do I need Maschine 3 with my M+ hardware and what are the…
-
Quickly open and close a plugin on screen
Hi I'd like to quickly open and close a plugin on my Mac or PC screen using a keyboard shortcut, or better yet, a MIDI CC.This would allow me to quickly have the full MassiveX interface on screen, for example, without having to use the mouse to click the tiny arrow in the Maschine software interface. JFQ
-
Is 1.61 the last update for M+ and Maschine 2?
I've looked and can't find the definitive answer here. I know I don't want to update my M+ to 3 because I use Maschine 2 software. Will there be more updates for the M+ that would still allow it to be used with the Maschine 2 software? Or is the next update only if you want to start using the Maschine 3 software?
-
Maschine 3.1.1. BUG - Browsing sounds leads to semi-random selection
Can anyone confirm this bug; When browsing the types of sounds on Maschine mk3 with the 5th knob from the left (lead/bass/etc.) i get semi-random switching for some types, instead of going from left to right as was the case on machine 2.x (tested and working right on v2.x). Same thing happens on Komplete control mk2 61.. I…
-
Light and dark mode for Maschine 3
Hey, I really like the new design and functions that were added into Maschine 3 but I hope NI is going to add the possibility to switch between a light and a dark mode of the whole interface. Even if its only the grey tone of the old version. Just would love to have the choice of that.
-
Maschine Jam Isomorphic Keyboard with Maschine+
I just recently picked up a Maschine Jam and really like the device. Match made in heaven for the Maschine for sure. So far, I’ve used it with Maschine MK3 and a PC, and all is great. One of the features that I really like is the Isomorphic Keyboard mode…
-
All of my Native Access-installed instruments have once again vanished when I open Maschine 3
I ran into this issue just months ago and ended up buying a new computer because I got no help from Native Instruments' Customer Service. I opened Maschine 3 as normal today and all of my instruments have completely vanished. Both Maschine 3 and Native Access are the most up to date versions on my MacOS running Sequoia…
-
Maschine+ / Plus update 1.6.1 has screwed my standalone startup AGAIN.
NI replaced an original unit with a new one 2 or 3 years back, but it's the SAME issue on multiple threads - it hangs on the start-up screen. So they replaced faulty hardware with faulty hardware (and there are many users reporting the same). It was KIND OF stable on the last update - it would hang every 3 or 4 startups……
-
Maschine Plus wont update (Update loop)
Hello, i tried to update maschine+ to the newest update. It updated and started, then i tried to load in a instrument while downloading the new fx and then it shut down. Now everytime i try to start maschine+ in standalone modus m+ tells me "There is an update", i can update, shutdown or restart maschine, when i press…
-
Maschine 3 Projects can't open in MAschine+ Stand Alone
Hi, when is planned, to roll out an update to support loading Maschine 3 Projects on Maschine + Stand Alone? THX
-
How to use cue out the headphones
I don't get how you use the cue on maschine+ I would like to hear a sound over headphones only. I get you select master out the headphones, does that setting need to be set at master. I need a general run down
-
Using maschine with Roland mx1, tr8, and tb3
hi I currently have two set ups, my maschine mk3 plugged into my mac and a hardware setup which is the Roland mx1 running as the master setting the clock for the tr8 and tb3 (both connected to the mx1 via usb) I want the machine my to act as a synth engine so i can use serum 2 along with the Roland hardware. How best do i…