-
Z1 MK2 blurrey display
I bought the Z1 MK2 controller as a mobile second device for Christmas. What bothered me from the start is that the display is very blurred. Unfortunately, I haven't found anything else about it, but I'm wondering whether this is a general problem or a manufacturing fault. I also have an S4 MK3 controller and the display…
-
Z1 MK2 issues with headphones output sound
hi everybody: I have the new Z1 MK2 and i have issues with the headphones output signal i did download the z1 driver and the master output sounds great but the headphones output sound is like with distortion, i was read about the headphones issues and i know is about the drivers but in this case i hope this issues is not…
-
Z1 MK 2 & Traktor Pro 4 Update Firmware of the controller stuck as the rescan button does not work
Hi, I just bought a z1 mk2, when launching traktor pro4, I am getting a message to update the firmware of the controller, a link redirect me to the updater which I can download and install. Once the updater is opened and I press the rescan button but nothing happens... So I am stuck here and not able to use the controller…
-
Issues with Headphone Cueing on Traktor Z1 MK2. Is This Normal?
I recently bought the new Traktor Z1 MK2, but I’m having an issue with headphone cueing. When I plug my headphones into the Z1, I can’t hear the cue or mix directly through them. The only way I get it to work is by setting Output 3/4 for the monitor in the software settings, and Output 1/2 for the master on the RCA…
-
X1 Mk3 + Maschine Mikro mk3 Traktor 4.1 function confirm
Can someone just quickly confirm: The X1 MK3 doesn't have a pre-loaded function to switch between decks, for full 4-deck FX, browser, and hotcue (AB, AC… to CD, DA…) without global reset The Maschine Mikro mk3 doesn't have a pre-mapped Controller Manager load-out for 2 remix decks (manual trigger deck and step sequencer…
-
Is it possible to use media players like a cdj to control the channels of a z1 mk2?
I currently have an x1 mk3 and love it. However I want to upgrade with an external mixer. I like how compact the z1 is, but i'm wondering how much use I will get in the future. Does anyone have any experience using the z1 mk2 and using a media player like a cdj to control a channel in traktor.
-
How to set up maschine mk3 audio out to a channel of the mixer of traktor z1 mk2
Hi, I am curently running my maschine mk3 with my z1 mk2…maschine is link to traktor 4 pro and the maschine audio is using the z1 mk2 audio driver I can dj using the z1 and i can play maschine on the top of the track but the sound from the maschine go through the z1 master output only, i cannot listen maschine through my…
-
Z1 mk2 firmware updater not detecting the controller
Hi all, Just bought a z1 mk2, when launching traktor pro4, I am getting a message to update the firmware of the controller, a link redirect me to the updater which I can download and install. Once the updater launched, it doesnt see any controller conected to the laptop, I press the rescan button but nothing happen...…
-
Speaker recommendations for Traktor Z1
Hi all - any recommendations for a bluetooth compatibale or a small portable speaker to connect with Kontrol Z1 at small parties / rooftops etc
-
Z1 MK2 - crash after Traktor Pro 4 startup
hi! I have an issue with my z1 mk2: Traktor 4 (4.1.1) crashes every time I connect the z1 mk2 before I fire up Traktor. When I start the software without the z1 mk2 everything works fine - until I plug the z1 mk2 in. What strikes me as odd is that the two z1mk2 tabs in the settings menu don’t show up when the device is not…
-
Configure the X1 Mk3 as Stem Controller
After seeing how stems are being controlled through the Z1 mk2 it makes total sense to be able to use the X1 to do the same thing, especially as it has the kill buttons alongside each of the dial controls. I was thinking about having a go at configuring this, but before I start I thought I'd ask two questions: 1) Has…
-
Why can't I send MIDI volume fader adjustments on z1mk2 when output routing is set to external?
I record my mix externally for each deck. The crossfader works perfectly and sends MIDI out. All other controls, including EQ, also send MIDI, but the line faders remain completely unresponsive. I've configured MIDI Out for “Mixer → Volume Adjust → Deck a/b/c/d.” With “Audio Internal,” everything works perfectly. Thx for…
-
Connect new controller Z1 with software Traktor Pro 4 : HOW? Please guide me.
Hello, I have never connected an external controller to my software and I struggle. There is an article on native instruments that says that : Make sure that the Z1 MK2 is connected to the computer. Open the Z1 MK2 Firmware Updater by double-clicking the application icon / file. =⇒ I have no idea to make sure z1 is…
-
Z1 Mk2 funktioniert nicht !
Ich habe in der Schweiz Einen Z1 K2 gekauft und Retourniert an Brack.ch. Da das Gerät nicht funktioniert und kein Ton rauskommt geschweige denn, es ein Update gibt, das das Problem beheben würde. Wie kann Ich die Serien Nummer wieder freigeben, das Ich mein Geld zurück kriege ? Ich habe auch schon gefragt über die…
-
About Z1 MK2 LED
My Z1 MK2 LED is dimmer than X1 MK3
-
Z1 MK2 Driver error. Audio interface selection is buggy
Windows 11 i7 32g ram Traktor 4.1 Im getting a driver error in device manager. I tried installing the drivers from NI for the Z1 mk2. (Ni driver 5.7) This did not remedy the error. In settings, sometimes it tells me to connect audio device even though z1 mk2 asio is selected. If I restart traktor it works ok. wdm exclusive…
-
How to use vinyl, DVS and a Z1 ?
Its been a good 15 years sincey last gig but I'm getting nostalgic. So I'm looking into getting my SLs out again for home use and really like the idea of using the Z1. My question is, what do I need to run my decks through Traktor while using the Z1 for mixing both files and standard vinyl?
-
2x z1mk2
is it possible to use two z1 mk2 at the same time? and are they free midi learn bar? for example I have 4 faders with pro 4 mfg ________________________________________________ *Translated by mod, please use only English language in the forum.
-
Z1 Mk2 (OSX) core audio driver loaded but not recognised in 4pro
Z1 is paired with 2X1 Mk3s. everything was working fine until it suddenly didn't work. I get the following red warning. Restarted the app and restarted MacBook but no joy any advice or clues what of what to do? Is it suddenly MIA/DOA?
-
Interface help needed!
Dear Traktor Community Hope you can help, I've been struggling to get clear answers from various retailers on how to solve this problem: I want to connect 2x Technics 1210s to the Traktor Z1 (Mk2), buy the timecode vinyl (DVS), and use this DVS alongside my analogue vinyl. (I'd also like to use non-DVS controlled music…