-
Kontrol X1 2/3 Master Deck / BPM adjustment
Greetings, I am trying to understand the DEFAULT design reasoning of X1 mk2 for BPM adjustment. (I know it can be remapped) I know that Sync + Encoder adjusts BPM, but how can I know which deck is master without checking laptop screen every time? What is the point of deck being the master? Why not just always sync to…
-
Midi Mapping X1 to Rekordbox
Having trouble with this. I've seen a YouTube video about mapping NI controllers to Rekordbox with Controller Editor, but unfortunately, the latest version of the Controller Editor does not include the X1 MK3, even though the latest update notes says it does. Inside Rekordbox I've mapped several functions, but they won't…
-
X1 and Audio 6: Why does output routing of headphone cue not work?
My setup consists of an X1 MK3 and a Komplete Audio 6. X1 and Audio 6 are connected to the computer via USB. In output routing, Main Out is routed to Out 1/2 and Booth (for headphones) to Out 3/4. The speakers are connected to Out 1/2 of the Audio 6, the headphones are connected and set to 3/4. Everything works perfectly…
-
Traktor X1 MK3
I am loving the X1 MK3 a whole lot but i do have 1 issue though. I would love for the X1 Mixer/Effect was separated.. I am planning to buy a second one along with 2 F1s 😍
-
New NI Gear
I just got the Z1 and the X1 MK3 I trying to figure out how to get the volume for the faders to work its and now it switch to the beat jump and dont what i did LOL Oh and plus if anyone uses Maschine Studio with Z1 and X1 hit me up i really want to use it also its mapped but not working anymore since i got the other 2…
-
Kontrol X1 MK3: How to identify hardware revisions
I own two X1 MK3 units witch I purchased seperatly. The 1st unit purchased in september 2023 Q3, the 2nd unit in may 2024. The 2nd unit has better browse and loop encoders with more tactile feel just like the previous X1 models. So it looks like the X1 MK3 has been revised. I'm considering buying a 3rd unit to replace the…
-
X1 MK3 - Replace Power Adaptor with a USB-C to Barrel Jack adaptor
Good morning from Germany, I was wondering if it were possible to replace the standard Power Adaptor that comes with the X1 MK3 to power up the USB hub with a USB-C (would USB-A be also possible?) to Barrel Jack adaptor (like this one here: [as I cannot post links I have to try it like this:] https ://eckstein-shop…
-
Stand for TRAKTOR CONTROL X1 MK3 as on picture ?
Q: Translation inserted by Moderator (translation by DeepL) HELLO, I'M NEW HERE, MY QUERY IS TO KNOW IF ANYONE CAN HELP ME IN TELLING ME WHERE I CAN GET THE ARM OR SUPPORT THAT APPEARS IN THE PHOTO OF THE TRAKTOR CONTROL X1 MK3? I LEAVE ATTACHED THE PHOTO, THANKS! Community Code of Conduct - Please read before posting :…
-
SOS I need help ! KONTROL X1 MK3 - Loop move by 1-Beat only
Hello NI community, i recently bought the X1 MK3 without testing it beforehand. Stupid of me 🤫! Can someone please explain to me how to change the mapping using the Controller Manager. I would like to have the same default mapping of the old X1 MK1 for moving a Loop by 1-Beat only. (Press the Loop Encoder to activate a…
-
How to connect 2 X1 MK3 with a Xone 92 mixer.
Hi community, I would like to purchase a pair of X1 MK3 controllers within my Xone 92 mixer. I think that I need a external soundcard in order to pair both controllers with the mixer and them my laptop. Which is the most appropiate soundcard that fulfills my requirements? I didn't see enough information regarding that.…
-
Move loops 1 step instead of beatjump value?
Helllo! I usually set a 4 bar loop, that I need to be able to move around 1 bar instead of 4 bars (which is the current beatjump value when setting a 4 bar loop) as it worked on the Kontrol X1 mk1. Possible?
-
New video from Boris! How to create a hybrid DJ set (X1 & Maschine)
Warning! He does say "emm kay 3" 😁
-
Traktor Kontrol X1 MK3 and Freeze mode
Hello! I used to play loops with freeze mode on my S8. Is there a way to map this function on X1 MK3? Thank you
-
Looping function on my X1 MK3 won't work on left side? It mostly works but not flawlessly.
There is a different sound when pressing left side loop control, but the controller looks ok overall. When pressing loop on left side sometimes it won't respond. That does not happens on the right side looping control.
-
Why is Traktor latest version 3.11.1 is always starting setup wizard when connecting to new mixed
Hey guys! So I ve been experiencing this issus for the past 4 gigs, after updating to the last version , on Sonoma, Macbook Pro M1. When starting Traktor, while beeing connected to the club's mixer and x1 mk3, all the decks and X1 Mk3 settings are set to default, and starts the setup wizard as if i connected the X1 mk3 for…