X1 Mk3 Hybrid Setup - n°2 CDJ + n°1 Mixer (not digital output) + n°1 X1 Mk3

Asengee

Is it possibile to connect X1 and CDJ like this:
- n°2 CDJ are connected to n°1 X1 via USB. The X1 is connected to a MAC via USB
- CDJs are connect to an external mixer via AUDIO RCA line input (so the mixer don't have USB connection)

See image bellow.

Use the CDJ/XDJ aggregator for control CDJs with Traktor in HID mode.
Use X1 for TRIGGERING HOTCUEs and BEATJUMP function

Is It possible?

Uwe303

so you want a 2 deck setup (external mix mode) with the cdj´s as main deck controller, both aggregated to one audio device, one for deck a out and the other for deck b out to the mixer, and the x1 as additional controller for beat jumps and stuff - then it should work as you want it to work i would say

Technician

Direct audio is from usb sticks. The x1 wont link the software because its an input to the software. You will need a mixer with usb audio or box.

Uwe303

so you want a 2 deck setup (external mix mode) with the cdj´s as main deck controller, both aggregated to one audio device, one for deck a out and the other for deck b out to the mixer, and the x1 as additional controller for beat jumps and stuff - then it should work as you want it to work i would say

Asengee

@Technician no, the audio is from Traktor as cdj's are Traktor main controller because they're aggregated to one audio device and connected in HID mode via USB at the PC/MAC (as I and @Uwe303 said) and via audio to the mixer.
No usb sticks are connected to cd's.
@Uwe303 is your assumption or has it been tested?

Uwe303

Its my assumption

Technician

Sorry, I didn't fully understand what you where trying to do. So you are basically using the x1 as a usb hub for the cdjs. it should work