-
KK S61 Mk3 sustain pedal invert problem
Since it seems that you can't contact support on NI website (thanks), I'll list my problem here: Every time I fire up my new KK S61 Mk3, the sustain pedal behaves wrong, meaning that it sustains the sound when it's not pressed. I have to go into settings each time and change whatever value is there (normal/invert) in order…
-
Pedal for S61 Mk3?
I'm wanting to add a pedal to the S61 Mk3 that I've had for six months now. However, I am wondering if there is a pedal that would give me more than 'sustain' that I should look at? I have the list from the website, but I admit to only having used pedals on a piano before so I was wondering if there were other things you…
-
Kontrol S61 mk3 incorrect sustain pedal values
After power on of the keyboard the sustain pedal always trigger cc64 value 0 when sustain pedal is pressed and value 127 on release. This is independent on invert or not invert setting. As soon as I modify any setting for the sustain pedal (for instance change off value from 0 to 1) the values sent are reveresed and the…
-
Foot Pedal with Native Instruments?
Hello, I own a Komplete Kontrol A49 from Native Instruments and recently bought an M-Audio SP-2 sustain pedal. I plugged it into the "Foot Pedal" input at the back. However, the pedal does not seem to work. In various programs, such as the Basic Piano from Native Instruments, nothing happens when I press the pedal.…
-
Sustain Pedal issue with A49 keyboard
I have owned an A49 for several years but never connected a sustain pedal to it. I just bought an M-Audio SP-2 and for some reason I just can't get it to work. I have tried the following: The sustain pedal works fine when used on other keyboards, and I have tried with the polarity switch in both positions With a MIDI…
-
Noire CC64 Controller (Sustain)
Hello. I tested the behavior of the CC64 controller in VST Noire because the sustain of the instrument seemed unnatural to me. (See table). The behavior was measured from note A1 - A7. Normally, you would expect the behavior of a piano pedal to be even. This is not the case with the Noire VST. The measurements result in…
-
MK3 Keyboard with 2+ Pedals MIDI CC not working properly?
Does anyone else have an issue with MK3 Keyboard sending the wrong MIDI CC when using multiple Continuous Control pedals? I have a MK3 88 and Roland RPU-3 triple half-damper pedals (3 TRS cables) connected as continous controllers sending MIDI 64, 66, and 67 to my Hydrasynth desktops modulation matrix and Kontakt. When 1…
-
roblem with my sustain pedal MK3
Hello, I have a problem with my sustain pedal. I have the Komplete Kontrol S88 MK3. For about 6 days, the Komplete Kontrol software has not been recognizing my sustain pedal anymore. Other programs like Opus and Halion Sonic recognize it without any problems. I think it is a routing issue within the software. When pressing…
-
S88 Mk3 controller/sustain pedal
I hook up my S88 MK3 to Ableton via my computer USB but was also hoping to connect an external keyboard to the controller for purpose of using S88 Mk3 sustain pedal to work with my external keyboard via midi cable. My Novation keyboard allows this but so far, I only have read where it's either USB or Midi cable out of the…
-
Sustain pedal ports no longer seem to be working.
I'm reviewed both of these: https://support.native-instruments.com/hc/en-us/articles/115005166305-How-to-Configure-Sustain-Expression-Pedals-on-Kontrol-Keyboards https://community.native-instruments.com/discussion/5234/tips-how-to-fix-sustain-pedal-issues-on-our-mk2-keyboards Issue occurs on either macOS or Windows.…
-
Script: Virtual Sustain Pedal From Pitch Bend
Here is a little script I wrote that I find really useful: https://gist.github.com/shcipwa/1050ac04e295dee1a6c2767eeef8a766 I originally wrote this for playing Piano using Native Instruments Maschine without a sustain pedal, but should work with any keyboard with a pitch bend wheel. It works great because the Maschine MK3…
-
Does sustain pedal work on The Gentleman?
My Maschine session is loaded with sampled instruments and Kontakt's The Gentleman. All sampled instruments respond fine to the sustain pedal attached to my MIDI keyboard. Gentleman does not. Even though the 'red light' for PEDAL does lights up when pressing, I release keys and sound goes off, just like if no pedal is…
-
Continuous sustain pedal still works in opposite way
I have tried to connect my Yamaha continuous sustain pedal to my S88 mk3. With all the settings according the manual and calibrated. It seems to work, but regardless of whether Invert mode is on or off, it still works in the opposite direction. What did I do wrong
-
How do I connect and configure Komplete Kontrol S88 mk3 for half pedaling
Hi, first post ever on NI forums. I am new to NI hardware and software, and I only have basic knowledge about MIDI. I recently acquired the S61 mk3 controller, and was able to get half pedaling working by disabling the sustain pedal in the controller's settings (Mode=OFF), and configuring the "Assign 1" port as follows:…
-
Sostenuto pedal for S88 MK3
Can I make the middle of my three pedals (Roland RPU-3 Electronic Keyboard Pedal) a Sostenuto pedal? And, what can I do with 'Assign 1' and 'Assign 2' pedal inputs? There appear to be four inputs for pedals on the S88 MK3. Am I right? Sustain: Expression: Assign 1: Assign 2.