-
Pitch correction for Maschine Plus
It's a shame that M+ doesn't have a pitch correction effect onboard, but I found a way around the issue... This is one of three new AIRA gadgets from Roland, the E-4 Voice Tweaker. Internal battery recharged via USB, and audio via USB too. Plugged it into the M+ and hey presto... I recorded some tuned and harmonised vocals…
-
Maschine+ in Storage Mode
New Maschine Plus (May 2022), up to date software. Following instructions in this post: https://support.native-instruments.com/hc/en-us/articles/360016355098-How-to-Use-the-MASCHINE-in-Storage-Mode-to-Transfer-Files Storage mode (Button 3) is not available in System mode. Mac OS 10.15.7 How to get in Storage mode?
-
Maschine Mk3 / Maschine+ as Komplete Kontroller
Please allow the Maschine Mk3 and Maschine+ hardware to be used as controller for Komplete Kontrol when not used to control the Maschine software. It’s really painful to have a great piece of controller hardware on the desk unable to be used with Komplete Kontrol when working with a different DAW. I would love to be able…
-
Reaktor Ensemble image in Maschine+
I'm currently learning how to build Reaktor Ensembles and how to prepare them for the Maschine+ so that they work and have properly mapped controls. What I do not understand is how to provide an image which is then displayed on the M+ screens, like for the factory provided Ensembles (Carbon 2, Lazerbass, Newscool, Space…
-
Maschine Plus 1.4 update is out now!
Hey everyone, We're finally here and the update for Maschine Plus is now available. As we already shared, this update brings the much anticipated autosampler feature and a few other goodies. Additionally, we released an update for both Maschine and Komplete Kontrol We sincerely appreciate everyone's patience during the…
-
How do you connect the Maschine Plus to Mac via USB connection?
Hi I know this might seem like a really dumb question but I cannot access the SD card on my Maschine Plus via USB connection. Normally when I'm at home I have a SD adaptor for my MacBook so I can just insert the SD card into that and easily transfer files both ways. However I don't have that adaptor now I'm away and I…
-
Anyone else having crashes when recording audio into clips in Maschine Plus?
I've had my maschine+ for about month or so. Love the workflow, but the stability is less than optimal. Have just started exploring the clips functionality and so have been trying to record some guitar lines in standalone mode using the built in Line-in A/Ds. I've run into a problem a few times where after a take of…
-
Spooky Nightime Lights on Maschine+
Hi All and thanks NI for the latest updates. I was using my Maschine+ yesterday and forgot to shut it down until late at night. When I did so, in the dark I noticed that as well as the red pulsing power light, the Mute and Variation buttons were also faintly illuminated. I pulled the power cord and all went dark, then…
-
Maschine+ Stability Issues
My maschine+ has been an absolute pain since updating to the new version. Every project so far has crashed numerous times in standalone. I had better luck with the previous version and that’s not to say it was a painless experience. Are we ever going to have a reliable standalone device because it feels like it’s moving…
-
Maschine+ and the Software Maschine
Hey everyone, I got some troubles with my M+ (I'm a newbie with Maschine) When I Plug in the M+ only via USB, Maschine Software is working and synchronizing with my M+. So everything I do in the Software, I see in Maschine too. But my Expansions (Groups, Instruments) are not available. When I Start Maschine+ with the Power…
-
Can I connect USB MIDI instruments directly to Maschine+ and sequence them?
Hello Can I connect instruments that support MIDI over USB directly to the USB ports of the Maschine+ and sequence them, or is MIDI over DIN supported only? If the former, if I connect a powered USB hub (Elektron Overhub) with multiple instruments connected to it, will the Maschine+ find them all? Also, if the former, can…
-
Maschine + Traktor Mappings
Hi! I'm both a Maschine and Traktor user and decided to search for a decent mapping with clear instructions and purpose, I found one that suits my needs and it was (or is) free. It does 90% of what I wanted so I'll map the rest 10%. Do any of you have one that's already mapped for the Maschine Plus? I found one here:…
-
Duplicate voucher with the Maschine offer
hello to all, I received 8 vouchers as a gift for the purchase of my maschine +, but I have a duplicate in the 8 vouchers, 2x the same voucher, where should I go to rectify this?
-
Delete factory content!
Why NI limits my interaction with device? What a problem give us opportunity to optimize our "work space" inside standalone device? I know my workflow, I don't need thousands of presets and sounds which I never use, I want keep my device clean with instruments what I use. I want feel this device exactly mine own and…
-
Plug ins won’t update
On my Maschine +. When I try to update the plug-ins Phasis and Raum. After is restarts the Maschine. It says it still needs to be updated. I’ve been through the process 100’s of times. And it still says the same thing