-
Mandatory Registration
Why is there mandatory registration from the start on the Maschine+? I'd say yeah, somehow when buying sound packs. But could there be any valid reason? And what if Native Instruments bites the dust - will all the hardware stop working? So is it more their hardware or our hardware?
-
Maschine + upgrade?
Well I'm about to buy another bit of kit and I've been searching for the elusive All in one Dawless purchase. Can Maschine+ fill the gap? The reviews aren't real positive. CPU and RAM seem to be the problem? The old crackle and pop performance issues. I also saw the news of the huge amount of staff being laid off…
-
Bought a used Maschine+ - SD Card original image
Hi Guys, I have recently purchased a used Maschine Plus and I am looking forward to making some stand alone music! However the previous owner seems to have wiped the unit clean so there are no demo/welcome project on the unit - Is there anywhere I can get an image of what came on the original SD card ?. Thanks in advance !
-
Maschine Plus - Selecting pad as Aux output destination is buggy and causes crashes
I prefer to add reverb on a pad as an Aux so I don't have to bathe all my drums in the same amount of reverb. However when I try to select a pad where the reverb is set up, the Maschine Plus is really finicky. The list of options scrolls slowly and erratically, and it's hard to select any specific destination, as the…
-
Shift for fine adjustments doesn't work when editing steps in step mode
This is annoying. In step mode, you can hold down a step and adjust parameters for that step, but try to adjust the pitch by an exact amount and you will start screaming. Holding the step, and shift and then adjusting the pitch does not let you fine tune that parameter. Am I missing something, or does Maschine+ just have…
-
Does Komplete 13 work with Maschine +
Hi , I'm sure this is asked a lot - im considering upgrading from my Maschine mk3 to a macshine + does anyone know - if my KOMPLETE 13 will work with the unit and expansion packs ive bought? it seems a bit unclear from the videos I've watched
-
Brand new Maschine+ Crashing on Startup plz help!
Hey guys I just got a brand new Maschine+ and after I entered my WIFI in the initial power up it shut off itself and the Power button is no longer lit. I tried unplugging and replugging the power cable in and the device would automatically power on and the screen would say "Maschine+ is starting" but then a few…
-
Sustain pedal with maschine plus (m+) in standalone? (not in controller mode)
Hi, I can use the pedal socket to start/stop record (connecting just the tip of the jack) or to start/stop transport (connecting the ring) using a Nektar NP1 pedal. But i cannot use a Nektar NP2 as a sustain pedal. Looking at the manual, it looks like one can change the function of the pedal socket (switch or continuous…
-
Poor line level signals in Mas+
I am bringing stereo line level signals direct from Korg Wavestate into Mas+... With the volume maxed out on the Wavestate, the signal is barely getting to -30db. I am assuming that this is an issue with Mas+ and/or Wavestate ... which makes me think that I should begin considering an audio interface / Mixer like Tascam…
-
Arpeggiator mode function button confusion.
Does the NI team have a specific place for feedback? This page from the Software Manual dated 5/2022 mislabels the 'F' buttons when in arpeggio mode on M+ with the latest update. I literally spent like 2.5 hours trying to figure out what was going on. Had I read the last sentence of the 2nd paragraph of the F1-F2 element,…
-
expansion installation, missing files/samples, and missing artwork
hey guys! Having some real problems with my Maschine Plus, I finally worked out how to install expansions from Native Access on to the Plus, I'm basically putting the expansions onto the SD card through storage mode. However not all of the content is available, most of the groups are not there and I am met with a error…
-
Maschine+ corrupted my SD Card, Neither the M+ nor Mac recognizes it anymore
Has this happened to anyone else? I was simply downloading expansions on a new SD Card that had been formatted in the Maschine+. It's a Lexar Pro V90 UHSII 300MB/s 128 GB card. There was nothing else on the card... no user content, nothing but Maschine+ installed expansions. Those expansions had been downloaded while the…
-
Maschine Plus 1.4 Issue
Hello , i‘ve noticed an issue on the new update with the reload Last Project Feature. If i turn it on the m+ have Long loading time (30 Minutes ) and crashes more than 3 times. If i turn it off than the issue‘s gone. why does this Happen?
-
What's the story with bluetooth on Maschine+ (wireless midi anyone)?
hi all. Just received my replacement M+ (third time lucky I hope after two faulty devices in a row!). Since I recently got some 'WIDI' connectors (bluetooth midi dongles) for my synths, it occurred to me that - with M+ bluetooth functionality (or so it says on the box), this will be a good thing to try out - i.e. wireless…
-
My Maschine+ projects no longer open in Maschine2
Hi I've just tried to open some projects in Maschine2 (Mac) that I created on Maschine+. Using the Storage Mode. My recent projects from end May '22 no longer open with Maschine2 saying "Loading Project Failed". All my old projects open no problem. Is this a bug from 1.4.0.3 firmware? My interest is to have the project…