-
MASCHINE MIKRO MK3 - Logic control surface
I'would like to use this device to make drum tracks and control Logic. None of the sounds that came with the device are useful to me. But I should be able to play Drum Kit Designer or EZ Drummer with the pads in Logic. Shouldn't I? When I choose the device as an instrument I can't get it to work as a midi controller. Where…
-
How do I use Maschine MK3 as a control surface in Logic Pro X?
I posted this before but the question has never appeared for some reason so I'm trying again... I've struggled to get my MK3 to act as a control surface in Logic ever since I got it two+ years ago. I tried a number of times but then just gave up. I've read that it should be supported out of the box but it never seems to…
-
In Logic - S88 Keyboard. Channel buttons in Mixer view opens VST/instrument - can't disable it.
In short, while in Logic pro x - when I press the top buttons on the S88 to go to whatever channel while in mixer view, I do go to that channel - but it also opens up the VST/instrument I'm using on that channel. Can't turn that off it's driving me a bit nutty closing it each time I change channels. I'm not sure if this is…
-
Native Access Application does not open and it states Unable to start the NTK Daemon
Yesterday I was doing a session on Logic Pro on my MacOS Ventura 13.3.1 and I was using Native Access and using some plugins on my session with no issues and all of a sudden Logic Pro started acting out so i forced quit logic pro and restarted my laptop. Once my laptop restarted I attempted to open the Native Access…
-
Battery 4 Not seeing my External Drive...
Hello Everyone, I recently updated my iMac to Ventura 12.2.1. Battery 4 shows my loaded user kit when I load it but it does not play any down or show any wave form. I noticed that while attempting to use Battery 4 in Logic Pro X, Battery 4 does not permit me to navigate to my external hard drive where my User Kits are…
-
No audio after recording my MIDI device into Logic Pro X. Is it my input driver?
I'm able to record my Maschine Mikro MK3 into logic, but there is no playback once I've recorded. I can't find a solution to this anywhere. Is it because there is no input device selected in my audio settings? If so, I can't change that for some reason. I don't have an audio interface because I thought this MIDI device…
-
Mod wheel is adding strings to my sounds
Hi there For whatever reason, the mod wheel on my S49 is now adding strings to my sounds on logic pro, and it starts only on C3 onwards That happens with the mod wheel on the right side, and even if I bring it fully down, I can still hear a slight sound of strings on top of whatever instrument Im using, such as a piano.…
-
How to restore default MIDI assignments for KK S88 Mk2 on Logic Pro
Hi there, I've had a Komplete Kontrol S88 Mk2 working fine with Logic Pro since I connected them both 8+ months ago. Today I discovered the DAW control keys such as PLAY, REC, STOP, LOOP have the wrong assignments. They are now playing keys (notes). I've been trying to figure out how to set the assignments back to the…
-
KKS88 MK2 and Logic transport controls issue
HI everyone - hope you are all well I received a new KKS88 MK2 yesterday After installing Komplete Kontrol I checked on the NI website on how to set up the S88 so the transport controls work for Logic Pro -- I followed each step set out by NI and, originally, the transport controls worked within Logic However, today, the…
-
Battery 4 Faders and Knobs UNUSABLE
I've been reading about this issue forcing people to update to Waves V14. Well, I thought that would work for me too but it didn't. I still can't use Battery 4. This is killing my high. My system Apple M1 Macbook Pro Mem 16gb OS: Ventura 13.1
-
DoI need to install VST3 plugins for NKS to work, though using Logic and AU?
Hello. I have a question I hope someone can help answer as I am new to NKS and am a little confused how the NI NKS setup works. It appears to me that though I use Logic as DAW and therefore AU as plugins, that I still need to install the VST3 version of the plugins, in order for the NKS supported plugins to work. Is that…
-
How to get a pattern of Maschine 2 MIDI tracks into Logic Pro?
Newbie here, trying to figure out how to get tracks I've created in the Maschine 2 plug-in into Logic Pro. I'm able to record what I'm doing in Maschine 2 into Logic Pro (by pressing the record buttons in both), but what I want to be able to do (and can't figure out) is to drag a multi-instrument MIDI pattern I've created…
-
DRUMLAB/Logic Pro — Recoding a (written) MIDI track to audio: What's going wrong?
Aloha from O'ahu, I'm working with a multi-timbral instrument, NI's DRUMLAB. A DRUMLAB's groove plays beautifully in Logic Pro. But... how to record each track to audio? I cannot bounce as there's nothing written in multi-timbral tracks: they're just playing. If I send from a MIDI track to a BUS, then use that BUS as the…
-
Does Guitar Rig 5 work at all with Logic on Monterey with an M1?
Hi, it's a blatant no, in the shape of an instant crash, standalone or plug-in. Is it a matter of sending off crash logs and giving up or are there any real workarounds? Cheers David
-
Best Resources For Learning How To Use Maschine Mikro MK3
Hi all, I know Native Instruments has tutorials, and of course, there are Youtube and Google. With that said, I'm new to Maschine Mikro and it would be much appreciated by me and others I'm sure if we can add helpful resources we've found that are on the subject of using Maschine Mikro MK3. Here are a few videos that I've…