-
Komplete Kontrol s61 mk2, Logic Pro, transport controls not working
Komplete Kontrol s61 mk 2 Been dealing with this for years like many others. It is not working at all after several restarts and reboots, after allowing full disk access. Especially since putting in the SSL Uf8. I just want to be able to press record on my keyboard and play. Everything is updated. It had a pretty good run…
-
Why relocating Ultimate 10 doesn't work? :(
Hi there, I tried to reinstall and relocate (most) of my Komplete Ultimate 10 on my new external Sandisk SSD. I had to do that because I lost my old Samsung T1 SSD where most of my libraries (for Kontakt for example) were stored. So I was trying via Native Access to reinstall the missing content and choose my new external…
-
Libraries in Kontakt crashes Logic Pro
Libraries in Kontakt crashes Logic When I open „libraries“ in Kontakt and switch through the presets, after 5 or 6 times Logic crashes immediately. Also sometimes when I delete these libraries from the Kontakt Rack, Logic crashes. Mostly it I have this problem with the following libraries: Straylight, Pharlight, Evolve…
-
Abbey Road 60's Drummer w/ Maschine Mk3 causing CPU spikes and glitches in Logic.
Hello everyone, Ive been unable to use Abbey Road Drummer in Logic w/ Maschine Mikro due to CPU spikes occurring and glitches in the audio. This is when using Maschine 2 as a plugin and during MIDI mode or with MIDI mode not initiated. Setup is the following: Mac mini (2018) 3.2 GHz 6-Core Intel Core i7 32 GB 2667 MHz DDR4…
-
Kontakt 7 and Logic Pro M1
Is anyone having Kontakt stall or crash in Logic? I’m running K7 in Rosetta mode but it will stall and I will shut it down. then it will crash. Here’s the 3rd time I’ve opened it.
-
No Signal in Guitar Rig 6 Pro inside Logic
Hello there, i just downloaded guitar rig 6 pro and set it up in the standalone. Everything works there . But when i try it in logic witht he same interface setup , i dont get any signals .... can you help me?
-
For Logic input, is the MK3 equivalent to a separate audio interface?
Hi - I'm figuring out my workflow involving Logic and the MK3, and have decided I prefer to let them both do their own thing. Work in Maschine, drag into Logic, record guitar, vocals and other stuff in Logic. I have an Apogee One, but it would be easier for me to minimize the number of devices plugged in and use the MK3 as…
-
KK still crashing Logic
I've updated everything (though the Mac is not updated to Ventura) and am still having this issue. When I instantiate KK on a track in Logic, and open the Browser on the S61 to pick a sound, it picks a sound OK. Now, before I updated everything, it would crash Logic any time I tried to pick a new preset. For example, using…
-
Mapping preset buttons on Logic Pro X
Hello, I'm using a KK A61 with logic pro X, and the Preset(up) and Preset(down) buttons don't seem to be active with the logic pro integration. Is it possible to "custom map" all the buttons? For example, it would be great to be able to move up/down the selected track with this buttons instead of the 4D wheel.
-
how to get CC11 on the second Control Strip of Komplete M32 in combination with Logic ProX
Hi everyone, Since I mostly use Orchestral libraries and specially by Spitfire, it would be very useful to have a better control over expression cc11 there has been quite some things written about how to program midi cc11 on the internet in Logic Pro x. however, al things I tried on those fora, did not work and I was…
-
How to get Komplete Kontrol to work in rosetta mode in logic
when I run version 2.8 in standalone mode and set it to open using rosetta, I'm able to get all my vst2 and vst3 plugins available. But when I open logic and open up Komplete Kontrol I cannot get it to do the same thing. All I can see are the vst3 plugins. I have set logic to open in rosetta mode, and restarted, but it…
-
Maschine software hangs while previewing kits - Bug (KBDSW-6977)
Hi all, Today I was back at Should I just sell off my Maschine MK3? It happens every time I take it out of the closet once in a few weeks. It's been that way ever since I bought the damned thing 3-4 years ago, but this time I figured out it wasn't the hardware or its complicated DAW integration to blame, but the software…
-
M32 and Mackie MCU PRO in Logic Pro
I use a KOMPLETE CONTROL M32 together with a Mackie MCU PRO in Logic Pro 10.7.4 (Big Sur 11.7). The firmware of the M32 is 0.4.5. If, in addition to the MCU PRO, the M32 is also registered as a control surface in Logic, there is a strange effect when switching between the tracks on the MCU. If I switch from one track to…
-
Need DAW recommendation for Macbook
I'm getting back into music after a couple years and want to create new music. I have NI Kontrol A49, Maschine Mk3, and Traktor S4. Almost all my hardware is NI. If money were no object I would get Ableton Live, but since it is I'm looking for a DAW that works well with the NI hardware I have. The options I see are Reaper…
-
Old version of Logic ProX with N.I.
Currently using an old version of Logic Pro X. 10.2. I bought and installed N.I. software to use with N.I. keyboard, both purchased in 2020. N.I. software does not work seamlessly with my version of Pro X. I am thinking the Pro X version may be too old? The unreliability issues are making me think that N.I. is not fully…