-
Lots of clicks, pops and glitches, and some electrical current issues - Maschine+
Recently got this hardware, but have been having a couple of problems. Firstly, there seems to be some kind of current running across the surface of the Maschine. I've experienced this before, on earlier Mac laptops. In one of the rooms in the house the vibration is quite heavy (Even got a shock from my connected…
-
After updating software, having an issue with the Browser
Now, when i go to Browser to browse instruments, and I hit the "All Categories" knob, it only lists "All…" and "Other" as options. It used to list categories: Drums, Synths, Sampled Instruments, etc. I no longer have access to these categories, just all the instruments lumped together… What gives?? Any ideas? Thanks!
-
Reconnecting Maschine to another MacBook
Hi, I registered Maschine to my old MacBook, which is no longer working and I've probably not used Maschine for about 3 years as needed to get a new MacBook. I have today tried to register Maschine to new MacBook Air, but did not recognise my email and password and I may have registered with an old email (but I no longer…
-
Storage questions
I have been trying to do this whole production thing from absolute drawing board, I’m very skilled in Brass Instruments, but I have enough knowledge in guitar and piano to have chose doing it, anyway, is it worth it to just get an SSD with SATA-USB? As far as over all decision on storage I’m either gonna buy a 1TB SD Card,…
-
Serial number
Hi community I just have a quick question. Hopefully someone can answer for me. I have two. Control S4MK3 I forgot which one I registered how do I find out a where do I need to go within this site to find out which one I registered
-
“An Error occurred while processing your serial. Please refer to this guide for more information”
Is the message i get when trying to register my new Maschine MK3. Which is about to be “my old” Maschine MK3 because I’m about to start the return process on Amazon and get rid of this useless brick. I contacted customer support but haven’t heard back yet. Maybe they have better things to do than try to figure out why the…
-
New expansion pack not showing despite serial being registered
Hello. Long ime Maschine/ NI user here. I recently purchased an expansion pack (samples and sounds, rather than full pack) and registered the serial in Native Access. Previously, all expansions have appeared automatically in Native Access upon rescanning or restarting. However, this expansion has never appeared. I have…
-
maschine+, please can u add....
more support for komplete, such as…. vintage compressers, driver, replika, choral, bite, dirt, freak, etc reaktor ensembles like, trk01, kontour, form, spark etc and more kontakt libraries please, please, please its starting to feel like ive exhausted the avaliable sounds and its got me thinking about the new akai mpc
-
Bought a renewed maschine can’t register
has anyone had this issue I bought a renewed maschine + and it says the item is registered and I can’t register it. Anyone no how long it will take NI to resolve this issue?
-
LineInput Sample Monitor volume low, replays wrong speed and normalize no effect
Hi guys, I just have the MaschinePlus for one week and updated its OS and its firmware. Symptom: connect via Lighting adapter an iPhone6, play sound in iPhone. Opened Sampling. Jacked up the input level in "Channel" to +10dB". Still, monitoring very quiet, nearly not audible. Can record at threshold -55dB (not good …) and…
-
Maschine+ and Traktor Pro 3 Synchronisation
I am attempting to integrate Maschine+ with Traktor (S4MK3) and I'm running into some Issues. I would like the Maschine+ to sync with the master tempo of Traktor, which I currently have working but I am unable to play scenes on the M+. I have it setup currently: Audio from M+ to S4 Deck C Midi: Generic Midi device to M+…
-
External hardware midi sequencer is glitching the M+ out when REC is enabled
Hi everyone, Back again for more of the same. I'm using a Polyend Tracker as the master sequencer for all my gear. I've got everything running well and as it seems it should on the Maschine+ only for one issue. I think the best way to explain this is thru an illustration: I have Group B set to receive MIDI channel 2 and…
-
How to loop sample to infinity without holding the pad
Good evening, I have recently bought the Maschine+ and it works great. I just cannot find one thing, that is important to me. I want to import sample, then press pad with this sample and it should loop to infinity, without holding the pad. When I set the sample as One-shot, it cannot be looped. When ADSR, I have to hold…
-
Maschine + Question
If i go to settings, choose MIDI then it show me the first popup menu and it stays all the time, or if i change parameter in another popup, after this, the first popup menu is opening and never closed. Is this a software fehler OR is a disconnection in the Hardware (for example the data cable, it can be, that one of this…
-
Is it possible to make a pattern less than 1 bar long?
I would like to make patterns that can create polymeters where one track repeats at a differing length from another.
-
How to keep the chord sets visible on the right display of Maschine+ after switching on Note Repeat?
Does anybody know here a way to keep the chord sets visible on the right display of Maschine+ (or possibly Maschine MK3) after switching on Note Repeat/Arp? (In chord mode) When I’m using it it switches to a kind of event view, and I can no longer tell which pad represents which chord set without taking a picture or…
-
Is it possible to record a hybrid set : the dj part from traktor pro 3 and the live part (maschine+)
hi everyone ! I saw that it was possible to do a dj set with traktor pro 3 + controller and a live performance with maschine + (with maschine + plugged to maschine software) So i was wondering if it was possible to record both the dj set and live set in one audio file ? Tell me if I’m not clear :)
-
How to export MIDI of a pattern in stand alone mode?
Hi, I'd like to export the MIDI of the patterns I created. I'm using Maschine+ in standalone mode. I tried the File → Export option, but all I get is the option to export audio. Is it even possible to export MIDI of patterns if standalone mode? If not, anyone know how I can export my patterns as MIDI? Thank you.
-
no more connection to my MiniFreak Synth via Midi (USB)
I have Maschine MK3 and Komplete Kontrol S61 MK2 and an Arturia MiniFreak Synth all connected via Midi/USB to my PC (Surface Studio). Until now, everything worked fine: Midi-Out (Group H, Pad 1, where I have the MiniFreak V loaded) was set to 'MiniFreak' Channel 1, MiniFreak listens on cnannel 1. Audio Out from MiniFreak…
-
Maschine 3 not working with Pro Tools
I have the most recent version of Maschine (3 I suppose?) At any rate, I can not get it to record midi in Pro Tools. I have gone back and deleted the 5 weird plug ins from my Avid Audio folder, no luck. I can hear it as a hardware insert, I can hear it as a plug in. I just can not record midi at all. I can record one track…