-
Where are the stem samples?
Hello, After using stem separation, a new group is opened. The stems are labeled as expected but no sound. When I hit Sampler it reads "Missing Sample" with a "Locate" button underneath. When I hit "Locate" the Maschine3 > Samples file opens up with nothing in it. Any assistance on this issue would be greatly appreciated.
-
Maschine + Sampling Mode ( Take ) With JP08
Hi, I'm trying to use the looper fonction of Maschine +. But I have a trouble because when I'm recording my loop the volume are not the same. The volume of loop are lower than the volume of JP.
-
Loading Addictive Drums 2 into the Maschine Mikro MK3
I can only get Maschine to recognize one kit, the corresponding codes in AD2's key mapping will only allow for the first of my three purchased kits to be recognized by the beat recording interface through the plug-in search. Anyone have any idea how to remedy this? Thanks for any help.
-
Maschine+ can’t save to new 512GB SD Card
Hello, I was hoping if I could get some help. Bought mint used maschine+ and a SD card (SanDisk 512GB Extreme PRO SDXC UHS-I Memory Card - C10, U3, V30, 4K UHD) becasue I heard the original causes crashes and other issues. I put the new one in, booted it up, I didn’t get the welcome screen but I was able to format the SD…
-
why doesn't my Maschine 3.0 software SEE my Maschine + ??
Newbie here. When I pull down the Controller menu in the software, all of the controllers are grayed out, including Maschine + which is powered on and connected to the computer. SHoudn't Maschine+ show as active?
-
Issue with Komplete and Plugin Installation on Maschine MK3
Hi everyone, I recently purchased a Maschine MK3 and registered the product in Native Access, following all the necessary steps. According to the package, it should include Komplete Select for free, which promises around 8 GB of plugins, including the “The Gentleman” piano. However, I can’t seem to find this plugin…
-
Add keyboard aftertouch support to Maschine
This is a FR for performers and musicians who are unable to fully use their keyboard's midi expression capabilities with software instruments in Maschine due to lack of support for aftertouch. We have an absurd situation where NI 's own flagship S Series keyboards, which have pretty good aftertouch, are not fully…
-
Maschine 3 and FL Studio workflow problem
Dear community, I am trying to solve my issue with a workflow between Maschine 3 and FL Studio 24. To utilize both worlds I am building a beat or some melody in Maschine and using MIDI dragger option I am moving the pattern to FL Studio. In FL I have the same one shots or instruments pulled. Unfortunately when I am doing…
-
Maschine+ as an interface
Hello, what do I have to set up so that I can use Maschine Plus as an audio interface for eg Studio One without this Maschine software? I can't do it. It works perfectly with the MC 707.
-
Maschine Mk3 - emergency stop all sounds?
I'm very new to the Maschine Mk3. In the "Halcyon Sky" Group there's a kit called "Hover Kit". If I load this and demo it there's some keys with a lot of delay or reverb on Pads 15 and 16. When I press Shift+Mute most of the pads stop but the keys on Pads 15 and 16 continue on for many seconds. How do I stop them…
-
Maschine 3 stand alone sound cracks and graphic stutters, while as a VST in a DAW all is fine!?
I recently bought a Maschine MK3, it came with the Maschine 3 software. If Maschine 3 runs as a Windows app, I have frequent sound crackles (yes, I tuned the ASIO buffer) and also the graphics is not smooth, the playhead moves stuttery and dragging an instrument windows is also stuttery. There obviously is something wrong,…
-
How to download Maschine software; I purchased it on Komplete 9 but not showing in Native Access
Hello, I recently purchased the Maschine MK3 (not Mikro) hardware for use with Maschine software. I purchased Komplete 9 on CD-ROM disc. I no longer have a CD Rom player on my current unit. I would like to download the Mascine software for use with the Maschine MK3 hardware. I cannot find a place to download this software…
-
Have an MK3 and thought it came with free software
Hi everyone! I was gifted an MK3 about a year or two ago, and I’m just now getting around to setting it up. I was under the impression that it came with Komplete Now software, but since I only have the hardware, I’m a bit confused about what software I need to download. Could someone clarify what’s included and how to get…
-
Mackie mcu template question
I'm trying to edit the mcu template a little bit for when I'm using maschine as a plugin in studio one. I have the mackie template and host transport control setup and running as expected. I was able to remap the erase button on maschine by changing it to an mcu button and the value to 95. Now it controls record in my daw…
-
Maschine 3 bundle Demo mode
gm bros I recently bought maschine mk3 second hand and the owner transferred HW licence to my acct. I then received Maschine 2 to that acct, which is how I suppose it should work. I then went and bought Maschine 3 bundle as it was showing that it was the "best option" for me. It also looked pretty logical to me: I now have…
-
Missing Maschine 2 sofware in native access
I recently bought Maschine Mk3 2nd hand, the seller transferred me the license however I am not seeing Maschine 2 or 3 in my native access. I did receive "massive for maschine, monark for maschine and rektor for maschine". Any help would be appreciated. Contacted Support but no responds so far.
-
Maschine 2 software missing in Native access
Hello, after the register of the maschine mikro mk3 hardware, the maschine 2 software doesn't appear in Native access. I can't use the product. Could you help me please ?
-
Machine 3 stops on VST scan
Having issues where when I try to Load the Maschine 3 application it starts to load looking or searching for VST‘s and other instruments, but then suddenly stops on Autoformer with both Maschine & Komplere Kontrol applications anyone else having this issue????
-
All the startups seem to jump over configuration to USB audio
I get no sound. I see the notes playing in Maschine 3 Ver 3.0.1 and the MK3 is responding but I cannot find the correct configuration to send out audio. My other devices work fine. I have a Solid State Logic SSL2+, and a Wave XLR for my microphone,a Yahama Sonogenic SHS 500-RD keyboard. Can someone point me to a…
-
How do you turn this thing off in Controller mode
When in controller mode, if I close the Maschine software or disconnect the USB the Maschine Plus stays on with the screens dimly lit. This thing will live plugged into my computer, so Id prefer to not have the screen on 24/7 and burn them out. But I can't figure out how to shut it off in controller mode. I guess I could…
