Mikro MK3 in midi mode
Hi all
I've got the Mikro in midi mode and it's set up in Logic Pro as a Mackie Control. I've loaded an instance of Drum Machine Designer and I'm trying to learn the pads but it's not detecting the Mikro. All the pads on the Mikro are lit yellow and the screen says midi mode, any ideas?
Best Answer
-
you can set that up , look at your 3rd image , on that page under assign/ hit , I think you set the min and max to the same amount
0
Answers
-
What channel did you set the pads too In controller editor ? Remember the other day , when I posted my template , I said the pads need to be set to channel 2 , that mackie template is probably set to channel 1Try
Check maschine settings , midi , in/out , turn on all ports virtual port etc
Check logics midi settings check the the ports are active
select the right input on the logic trk
1 -
your picture is a little blurry, but do you have 2 templates in controller editor, the mikro can only hold one template , if I remember correctly, you need to move the template you want to use to the top of the list
1 -
I think everything is set up, still no joy, any more ideas?
Thanks
0 -
done it, they were all still set to channel 1 in the controller editor!, thanks for your help!
1 -
…. one last question, is there a way to play all pads at fixed velocity in midi mode, if so so how do I do that?
0 -
you could probably set that up in controller editor, I’ll have a look in a bit
But they will be permanently fixed for that template
Try a logic midi fx
0 -
-
you can set that up , look at your 3rd image , on that page under assign/ hit , I think you set the min and max to the same amount
0 -
i thought it was you , i was talking to about the micro template with the other day , but it wasn't
here's a template i made for the micro and logic , and a link to the old forum explaining it
let me know if you have a problem downloading it as i posted it here a year back and for some reason it won't download
0 -
help! I've deleted the factory template by mistake and now there is no sound when I play the pads on the Mikro, Ive reinstalled the controller in Native Access but it still doesn't show the factory template?
0 -
Try to put these ones back in. They should be the originals:
0 -
All sorted now and thanks for the template, I'll have a go downloading it, I'm gradually figuring the Mikro out!
1 -
this is the second template , that i posted in that old thread , this has extra logic mcu controls
0 -
I can't download your template?
0 -
what does it do
try these, I've done these so you can drag them into controller editor template list . the others needed to be loaded , then exported and imported again.
0
Categories
- All Categories
- 19 Welcome
- 1.6K Hangout
- 65 NI News
- 828 Tech Talks
- 4.2K Native Access
- 17.2K Komplete
- 2.1K Komplete General
- 4.5K Komplete Kontrol
- 5.9K Kontakt
- 1.6K Reaktor
- 391 Battery 4
- 874 Guitar Rig & FX
- 440 Massive X & Synths
- 1.3K Other Software & Hardware
- 6K Maschine
- 7.6K Traktor
- 7.6K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators