-
Update to Maschine 3
Hello, I would like to update from Maschine 2 to Maschine 3. I also have Komplete 15 Collector's Edition. What do you recommend I buy: Maschine 3 – software update only or Maschine 3 including Maschine Central? Thank you
-
Maschine 3 update recommendations?
This discussion was created from comments split from: Up to date Maschine 3 manual anywhere.
-
Maschine 3.0 does not show up in Access
When my N.I. Mikro MK3 arrived, I followed the directions per the card insert...and connected it to a Dell Latitude 3500. I also have a FLX4 Controller connected to the Dell 3500, but not at the same time as the Mikro MK3 is connected. This MK3 to me, is complicated; it has me confused most of the time. But I was able to…
-
Saving Projects seems being buggy
Hello, I've installed the latest Maschine 3 Software 3.2. When I save my project AS <NewProject-Name> e.g. Save As "MyProject-Version2" Maschine adds a Filename Ending (mxpr). This is ok! But if I do SAVE AS again, Maschine adds a futher file ending. So I get: MyProject-Version2.mxprj.mxprj. The result on my Storage is a…
-
Why Maschine 2 only has demo mode available in NA 2 even though I have full mode serial registered?
Had an issue with my Fujitsu laptop equipped with i3-4300m processor and 16gb RAM so I had to reinstall Windows 10. Loggged into Native Access 2 and proceeded to reinstall all NI products. Traktor 3 and 4 installed and worked great but. Maschine 2 only allows me install Demo. Even though I have full version and have been…
-
Complaint Regarding Unresolved Repair Process
I am writing to formally express my deep dissatisfaction with the ongoing issues I have experienced regarding the repair of my Maschine Studio 2 SB, which is practically new and has been used no more than three times. Since November 2024, the device has stopped functioning, and despite numerous attempts to resolve the…
-
Maschine 3 Device CPU Overload, Audio Distortion, and Freezing Issue
Technical setup: Maschine 3 (v3.11) paired with Maschine Plus as a controller. (The same issue occurs with Maschine 2.) When playing back a project, the device’s CPU overloads and audio distortion occurs. Sometimes, Maschine 3 freezes, and I have to press the power button to the right of the CPU indicator in Maschine 3.…
-
Audio Tracks, finally!! Thank you NI. I love it
"ADDED Ability to select different takes in the audio module in different patterns. Allowing for better reuse of audio modules in a group" Thank you guys. Thank you guys. I finally can track vocals or guitar bass parts inside one respective audio module and thus create complex arrangements per pattern in a group. No wasted…
-
Maschine & Cubase
Hi - complete newbie with Maschine, but have played with Cubase for years. I'm struggling to fully integrate my new Mikro with Cubase 10.5. I've spent the last day or so going over online tutorials, but I wondered if there was a good collated source to help me set things up. What I've done so far: Installed the Maschine…
-
MIDI Scene change recording into Cubase 14
Hi folks, I have stumbled across an issue that I seemed have working some years ago, I am new to MacOS as well so there could be a quirk there but hear goes. So the way I used to work with Cubase and Maschine was to have the DAW record the scene changes I was doing live, by switching scenes on the Maschine MK3 controller,…
-
When to expect Maschine 3 on Maschine+?
Hi! I'm wondering when Maschine 3 for Maschine+ could be expected for release? I know the teams are hard at work, and I appreciate all you do!
-
Maschine GUI Plugin Window grabs focus
Hi, Since the 3.2.0 update the GUI plugin window is always in front of all other windows like when I want to check something in my web browser or a folder it's there in the forefront. Haven't had this issue before 3.2.0. Did any of you also notice this? BTW, I'm on Windows 10.
-
Can't drag and drop/import in sounds from PC files directly to MASCHINE 3
I've been using MASCHINE 3 for a while now and wasn't having technical issues that reopening or doing a reinstallation couldn't solve, lately i haven't been able to drag and drop (import in) sounds from my pc folders into pads unless it's through the libraries, which also requires me to rescan every time I add in new…
-
Maschine 3 crashing during live gigs?
Hey gang, how reliable are you finding Maschine 3? I just upgraded from 2, and to my dismay it completely crapped the bed about 15 minutes into a live set. Fortunately I wasn't alone so we were able to recover. It then continued to run for the next 3 hours. Later, back in the studio, I tested some tracks and again it…
-
Looking for help with the new Maschine bundle
So i recently picked up the maschine central library as I thought I would be able to use it as a VST, however I'm learning that I don't have Maschine. I bought the Kontakt Komplete 14 Bundle in the past and kind of assumed that it would've been included in that because maschine expansion packs were but I guess not. If I…
-
Maschine 3 drag and drop problem
Hey, I have maschine (latest updated daw) and i used to be able to drag any sound file/sample directly into it, but doesnt work anymore, anyone who could help a fella out? ( I use a pc )
-
Maschine 3 hardware compatibility
Hello, I knew that Maschine 3 (software) would not work on my Maschine Mk2 (hardware), but I didn't realize it wouldn't work with my Mk1 keyboard - the specs didn't say anything about Komplete Kontrol. Can anyone confirm this is true? Just want to ensure I'm not just doing something wrong. Thanks.
-
Missing Sample assistance
Hello - I am opening older songs I made and since being on a different computer than where the songs were created I am getting a Missing Sample pop up. However, there is so little space for seeing what is missing that its hard to even figure out what file is missing. Any ideas…?
-
macos, cannot use Maschine 3 properly
To whom it may concern, No time to approach the product support. Don't mean to seek advice, just want to state my opinion on this: Running Maschine 3.1.1 with Windows 11 and with Macos sequoia 15.3.2 (Mac Mini M4). Hardware is Maschine MK3. I need to have my projects, groups, sounds consistent across two (3 preferrably)…
-
Select/deselect multi channels on Maschine Studio
On the Maschine 3.2 application I can go to the mixer view and multi-select and deselect channels by clicking on them and holding the shift button or control button or CTRL-A or whatever. They will turn light grey when selected, and when I move one fader, all the selected channel faders with all move at the same time.…