-
Maschine 2 Plug Ins not loading from library bar but load manually.
Recently picking up Maschine after a hiatus and am struggling to load plugins from the Library bar. These load fine when adding manually. Rhe issue i'm faching and appears to be that when seleting an instrument say "Drum Lab" from the instrument library (Picture SS1) I then get an error message (Picture SS2) saying that i…
-
Maschine MK3 Hardware not detected
Hi everyone, I’m trying to get my Maschine MK3 to interface properly with my Mac, but I’m stuck and could use some guidance. I got this unit for Christmas, and been at it for Hours. System: macOS (latest) Intel Mac Maschine MK3 (USB detected by macOS) At this point it looks like the Native Instruments background agents are…
-
Kontakt 8 (Circular) audio corruption when using iZotope Neutron 5 + Ozone 12 in Maschine 3
I’m running into a reproducible issue with Kontakt 8 + Circular in Maschine 3 that I haven’t seen clearly answered elsewhere. System: Maschine 3.4.1 Kontakt 8.8.0 (VST3) Circular 1.5.1 MacBook Air 15", M4 (2025) macOS Tahoe 26.0.1 iZotope Neutron 5.5.1 iZotope Ozone 12 Advanced (12.1.0) Issue: While mixing, I used Neutron…
-
Maschine Mk3 - Changing templates without having to open the Controller Editor.
When you press the Channel key with SHIFT, it gets you from the native Maschine mode to the Midi controller mode, and each time it goes into Midi mode it seems to go back to to whatever profile was previously selected. I have five profiles in my maschine's midi profile list. But which profile is active is only really…
-
maschine mikro mk3 and maschine 2 software
I am unable to activate this newly acquired hardware (Christmas 2025) with Maschine 2 software. I found the legacy page and installed native-access (2.15) and Maschine 2. Native access accepts the serial number but will not show the installed maschine 2 software. The Maschine 2 software works with the hardware in demo…
-
Lifehack for Maschine plus. Do you want M.2 NVME SSD inside? I really wanted it, and I got it!
I pulled out the wifi module, inserted the adapter and ssd 512 gb. I formatted it in exFAT beforehand and loaded Kontakt tools onto it. The disk was detected, the tools load quickly, since the read speed is now about 1500 mb per second instead of 60 - usb 2.0. If anyone is interested, join in! I have made my contribution…
-
UPDATES !!!!! 40s Drums & Keys is on Maschine+
Ive noticed some updates, at least 8 a day and…… 40s drums and keys for maschine plus is now available!!!!! and Kontakt 8 got an update too for Maschine plus !!!! thanks NI
-
Anyone can confirm this bug M+ Standalone
Anyone can confirm following bug? In Maschine plus, stand alone, when you load a kit and set chokes or links on an expansion group, with pattern+ and routing+ disabled, the next group you load in the same place, will remember the placed links or groups! I had to do some rescanning today and to my knowledge I did not have…
-
Still audio issues, MK3 with S49
********Previous post********* I need assistance in connecting my equipment. I would like to use my laptop or MK3 to load up sounds, samples, or kits, but have them controlled by my Kontrol S49 to be able to Play or record. Mac has USB-C splitter. I have 2 sets of Midi cables. Thanks in advance.**************** So the…
-
Convert Controller Editor MIDI Template for Maschine MK3 to Maschine+
Using Controller Editor, I've created a heavily modified MIDI template for Maschine MK3 and Logic Pro integration, and I would like to use the same one with my Maschine+ hardware. Controller Editor exports a .ncm3 file for Maschine MK3 templates, and a .ncmp file for Maschine+ templates. Is there any way to convert the…
-
The New AKAI MPC Live III
WOW…. just WOW Not sure what to even say. If NI is working on a new version of Maschine, its got it work cut out for it: https://www.youtube.com/watch?v=A1XbD59wDeM
-
At some point will we get real time time stretching in the Sampler?
not even sure why I’m even asking? I mean live been using it since v1.xx Been faithful through the v3 software rewrite that was supposedly done so they could bring that feature. It has been the #1 request and probably the biggest reason users jump ship to other platforms yet here we are headed into 2026 and still have to…
-
Gross Incompetence with Maschine 3 Update (and S88 MKIII)
This is just a simply, short post to call attention to how absurd it is that a company the size of Native could release a basic OS update that we not only have to pay for on an already $1000+ piece of hardware, but that will literally brick your device if you proceed to update it as you cannot re-register a piece of…
-
shortcut to sampler
With the new update it seem that shortcut "S" now toggles between sound and group instead of going directly to the sampler, i really miss it. Is it moved to another keyboard slot or gone forever?
-
Maschine Plus Loading Project Failed
Hello, after updating Maschine Plus to firmware 2.1.0 I can't load my Ocean and Welcome projects anymore. It says Loading Project Failed. What can I do ? Thanks.
-
cant drag and drop
for some reason i used to be able to drag and drop samples, songs, etc. on to the mk3 via the software. but now every time i try to drag a sample to a empty sound pad i get the little red circle crossed out? did they take drag and drop away?
-
issues with maschine 3 and mk3
for some reason every time lately when i am using the mk3 with maschine 3 software, i'll go to load an instrument or kit etc. and some of the time it will work but mostly the software will close which will restart the mk3. any ideas as to why or what i can do to fix it? anything helps thanks in advance
-
how to accses Ni 360 on my Maschine + ?
I have Ni 360 pro trial , and i don t know why i don t see it on my Maschine + . I m thinking maybe that my sd card that is from factory , doesn t have enough memory. I will buy next month a new sd card ( 1 tb) . But i wonder if is not this the reason. Please help me. Take care.
-
Maschine 2 Software not available in Native Access - Solved
Hello, i move to a new computer. After installing Native Access , i can´t find my Maschine 2 license. Just the factory selection. SOLVED! There is a legacy button you have to switch!
-
Machine User Group appears in the wrong category
Hi, I created my own drum kit (expansion) and took 16 samples from this pack to build a user group, which I saved so that I can reuse this group later in another project, i called it Surf and Turf Kit (just Nonsense) Why is it displayed in the user section as a Maschine kit and not with the image of my Caruzo Coast drum…
