-
Drag & Drop Audio Sample is not working
Hi Everyone, I am using maschine 2, and usually i use the drag & drop audio sampling tool a lot. But right now it's not working. ( You can see on the picture below) I couldn't find the solution for this. Anyone had this problem before ?
-
I really miss this feature of Maschine 1.8 thats not on current Maschine software
I really miss a lot the function of whole group pitch it made things so faster while choppin things. Also it was so good when fixed velocity was 127 by default.
-
Maschine 2.17 not including drivers for Mk1 HW
Hello, While troubleshooting my Maschine mk1 that is not starting up properly, I realize that the directory for drivers is missing (I am on Windows 10, so under c:/program files/native instruments/maschine...), for newer version of the HW the directories are all there. Is this intentional? I have difficulty finding…
-
how to fix buttons and knobs on a maschine mk1?
7 of the 11 knobs were constantly sending random control changes, even when not being used, and several of the buttons needed an extremely hard press to work (mute, solo buttons, etc.) for the buttons, i thoroughly cleaned all the contacts on the board with alcohol, as well as the "black small things" on the rubber buttons…
-
I can't run native access in my OSX Yosemite?
I have downloaded the Native Access 10.15 for my Osx but when I try to run it Native Access trys to search the last update and the download failed (The net is all right). I click in the website to do it by myself but when I have downloaded the lastest version( The downloaded is the Native Access 2) it doesn't work for this…
-
Maschine Mk1 wont power on
Hello guys. I just bought a used Maschine Mk1 and am having trouble powering it on. When I plug in the MIDI into the computer, it will light up once but after that, nothing will happen. The screen doesn't light up or anything. If there are is any help or suggestions, it would be greatly appreciated.
-
Send Maschine mk1 audio to roland mx1 mixer
Hi Everyone. I'm looking to send audio from my maschine mk1 controller to my roland mx1 mixer. So I can use the digital channel to output the audio . Does anyone on here have experience with this.
-
Maschine download won't show up in Native Access
Trying to install my old Maschine MK1. I have the disc and serial number on hand. In my NI profile on this website, I see "MASCHINE incl. Komplete Elements" under Products and Serials.. yet inside of Native Access, there is no download for Maschine. I even tried installing via the old CD disc and it won't let me utilize it…
-
Upgrade from Maschine MIKRO Mk1. Can I update Maschine 1 software only?
Hi everyone, apologies if this has been covered or perhaps it's a silly question. Here's my issue: I purchased a Maschine Mikro Mk1 many years ago, and have been using it on my High Sierra system for the best part of 8 years. I have since upgraded to a M1 MacBook Pro and am to understand that the hardware is understandably…
-
Maschine MK1 software not found after registration
I'm having the same problem that many people seem to have: Maschine software doesn't show up after hooking up the hardware, installing the driver and registering the serial as described by NA2 UI "Look for your product software in the Available section" but it's not there. Tried numerous times, restarted NA2, rebooted,…
-
Creative ways to use old Maschine Hardware.
I have an old MK1 and a Studio. My MK1 served as my live performance controller for a long time, but now I don’t perform live as much and my Studio has been replaced by my MK3. Do you guys have any creative ways that you use old hardware? It’s damn near impossible to sell without software, so I’m trying to think of a way…
-
Can I import and save sounds from my electronic drum set module into the software?
Hello Everyone, I hope that you are all doing well. I have never used any of the Native Instruments software, but I just bought a couple used Maschine MK1's and an used Maschine Mikro MK2 to try them out. I have three drum set modules, a Simmons, a KAT, and a Roland set. I am giving away one set to my little cousin and I…
-
Buying Maschine MK1 without software for windows
Did you buy a Maschine MK1 without software for your windows computer on Ebay, Offer Up, Facebook Marketplace or Craigslist etc? Don't panic you still can make it work but with an small investment and free software drivers. Below I have compiled how I got my maschine mk 1 to work on my window 10 laptop. Step #1: Install…
-
ipad and maschine hardware version compatibility
Hi guys I am thinking of making the jump into traktor for ipad with a kontrol s2 or s3 mk3. I was wondering which ipads are compatible? is it just the m1 based ipads that don't have compatibility with traktor dj 2? another thing, I have a maschine mark 1 and I was thinking if there was a creative way I could use it for…
-
Maschine MK1 doesn't work on New MacBook. Any help to get it to work?
Hi, Just putting together my old Maschine MK1 setup and noticed that there is no Service Center anymore and that it just flashes once and doesn't work with my new MacBook Pro. I have heard there is a write up by someone on how to get this to work but I haven't found it. Any suggestions would be helpful. Thanks!