-
Maschine Mk3 midi mode in Pro Tools - HELP Please!
Hello, Community, I am desperately hoping someone out there can help me. I am trying to record midi into pro tools. I have watched every video possible. I am setting it up properly as far as I can tell, per multiple videos. I go to group and switch input to manual, source is host. I’ve tried C1 and C3 as a start note. The…
-
A61 Komplete Kontrol keyboard with Maschine 2 - Everything except notes
Previously fine - but after setting up protools (and using the maschine plugin) - now the A61 KK Keyboard has stopped registering keystrokes. It is connected - can use all the controls. It registers the instrument chosen on its display etc.. Keystrokes don't register (NOT that they are silent). Meaning no midi info is…
-
Komplete Kontrol Save Function and Knob-Assignment doesn't work
Hello, i want to report two bugs/malfunctions, which in my humble opinion are quite severe, and seem to be connected to each other. There are essential parameters which can not be assigned to the Komplete Kontrol Knobs via the Plug-in panel's Edit mode. For example it happens with KONTAKT. Open up a Kontakt based…
-
Bug on the S61MK3 - starts with sampler ON and it doesnt show ableton tracks anymore
Hello friends, I had some great months with my new S61MK3 with ableton. Everything just worked fine. Since some days, whenever I open a project on ableton, the S61mk3 shows on the screen the "NI sampler" and I can't get to my usual instruments on KK. Furthermore, when I press on the "daw" button, the screen on the keyboard…
-
Kontakt guitar libraries and Arp and Note Repeat feature on new Kontrol S-Series MK3 keyboards
Hi! Please someone let me know if using arpeggiator or note repeat feature (by pressing Play Assist and choosing Arp or Note Repeat) on the new Native Instruments Kontrol S-Series MK3 controllers work great with Kontakt guitar libraries and specifically with melodic instrument of Session Guitarist Electric Sunburst Deluxe.…
-
Trying to play a Maschine drum kit with A61 keyboard via Komplete Kontrol software
I'm a complete beginner, so sorry if this is an obvious question! I have just bought a Komplete Kontrol A61 keyboard and the basic software that comes with it. In particular, I have the Maschine Factory Selection Sounds. In the Maschine 2 software, I can load a Maschine kit and spread the different drums out on the A61's…
-
Updating to Komplete Kontrol 3.1.2 broke functionality of my S61 Mk, can't revert!
I have been using an older version of the KK software with the previous GUI (pre 3.0 I believe?). I updated to the new Native Access 2 and noticed a new version of the KK software available... I foolishly updated without realising that N.I have stopped supporting the MK1 keyboards post 3.0. Fine, back I go to 2.9.6 of the…
-
Komplete Kontrol SC88 MK3 is powered but unresponsive. Why?
I have yet to fully set up the Hardware Control software. All permissions have been granted for direct HD access, but the install consistently fails. My unit did not come with the host to keyboard USB-C cable, and the one I am using is 4' long. The keyboard lights up, tells me the serial number, and awaits instructions ...…
-
S88 MK3 keyboard configuration & firmware update problem 💀
Good morning I just bought the Kontrol s88 but I can't complete the settings. The keyboard screen says “Get the latest update”. When I try to do the last installation, a panel opens but nothing starts: The keyboard is however well connected (on "host") to the computer. When I click on "rescan" nothing happens. Does anyone…
-
Komplete Kontrol S61 MKII is in Midi Mode after change the track
Hi, When I create a new instrument track and load Komplete Kontrol, everything works. When I create a second track and jump between the tracks or select the other track, the Kontrol is in Midi mode. When I click on the keyboard icon (see screenshot) it is back in plug-in mode until I change the track again. I use Cubase…
-
KOMPLETE KONTROL M32
Every time I change the selected track in Cubase 13, the KOMPLETE KONTROL A25 gets disconnected from the MIDI link. Would this symptom also occur with the KOMPLETE KONTROL M32?
-
HELP PLEASE 🙏 Anyone else having issues with Mk3 keyboard midi randomly changing pitch?
I bought a new S49 MK3 keyboard end of Oct '23. Worked fine until last week. The problem is now whenever I try to play an instrument - apparently with aftertouch capabilities - the pitch randomly shifts up half a semitone (sometimes 3/4 semitone) and sticks for random number of notes/chords and then will correct to proper…
-
has anyone gotten firmware update to work for Kontrol S88 mk3 - on windows?
I've got my new s88 mk3 but updater fails to update the firmware on the Kontroller. Updater thinks the Kontroller has failed to boot firmware update mode. The Kontroller display states it is updating. using windows 11. the hardware service is installed the usb services are there. Thanks in Advance. Phil
-
Support for Reaper a KK / Kontrol MK3 Keyboards
Hi folks, I'm really trying to look around for information regarding support for Komplete Kontrol and the new MK3 keyboards inside Reaper. I know it's not listed as a supported DAW, but I do struggle to believe that, as Reaper's usage is quite extensive. Furthermore, like others, I've been having trouble with KK inside…
-
S49 MK3 + Live 11 - Selected track keeps jumping to first track
Has this happened to anyone? When I've selected a track and playing it(they're all kontakt instruments) the selected track always jumps back to the first. No matter which track is selected. Man... There's always something keeping me from doing my work, every single time I use NI software....