-
Tip for successful installation of the Komplete Kontrol s49 Mk3 Firmware Update post purchase
Just wanted to share a tip for anyone stuck on the Komplete Kontrol S49 MK3 firmware update. I had the ‘something went wrong’ loop until I plugged in two cables at once: the regular USB-C to my PC and a second USB-C to A into a simple phone charger for extra power. With both connected, the update finished within about half…
-
Komplete S88 Mk3 Knob Issues after Firmware Update in Logic
Hi, After updating the firmware, my knobs will now only increase values (Can only turn things to 100%) and aren't able to reduce values when working in Logic Pro. This happens in both the plug-in mode and the Daw mode. I don't think there's anything wrong with the actual knobs because when I press Settings and try to…
-
Hardware Connection Service update fail after firmware update to 2.0.4
Windows 11: After successfully updating the firmware for my S88 Mk3 to 2.0.4 I was asked to update the Hardware Connection Service on the S88 screen. So within Native Access (latest version) I clicked "update" for the Hardware Connection service update and updated with confirmation message that it completed successfully.…
-
Connection issue and solution after installed Komplete Kontrol Mk3 firmware 2.0.4
Let me share my story with the update, it may help others. I instantly updated my Kontrol S61 keyboard with 2.0.4 firmware after I saw that there is a new version available in the NI newsletter. → first mistake After it installed (it takes 2+ hours every time) only the basic functionalities worked, so I saw only the…
-
Maschine MK2 Hardware not being recognized with software
I'm having an issue using my Maschine MK2. I completed the full installation and when I startup MASCHINE software my hardware is not being recognized. It stays on "groove production studios" . I followed the NI support steps and figured it might be my firmware out of date, when I open the "device updater" to update my…
-
Latest s61 MK2 firmware?
Hi All, I plugged in my s61 MK2 today and it told me that there was a firmware upgrade ready to download. I thought this product was no longer supported by Native Instruments? My kbd reads firmware v0.6.0, and the firmware editor offers update to 0.5.9 (as described by another user in the forums), but the file downloaded…
-
Why my kontrol MK3 s49 screen is flashing white, and changing to the wrong color of my display?
Hey guys I'm here to ask for help, coz I didn't seen anyone else's with this problem. So I tried to update my Firmware of m mk3 s49 Kontrol Keyboard, but I think something went wrong. I So before my main OS was windows, and now I'm using MacOS Monterey for music. Before I plugged the hardware, and everything was fine,…
-
Traktor S4 which correct software and driver audio and firmware for windows 11 pro
Dear All, please I need help for my new HP Elitebook with Windows 11 Pro software. I have downloaded all the drivers but the pc is still not reading the console S4. I am still not viewing the S4 in the audio setup from the Traktor Pro3. Can you help me to know which are the correct driver audio and correct firmware that…
-
Z1 mk2 firmware updater not detecting the controller
Hi all, Just bought a z1 mk2, when launching traktor pro4, I am getting a message to update the firmware of the controller, a link redirect me to the updater which I can download and install. Once the updater launched, it doesnt see any controller conected to the laptop, I press the rescan button but nothing happen...…
-
Keyboard Kontrol S61 MK3 Firmware update failed
I downloaded the updater for firmware 1.9.4. When I turn on my S61 it shows on the display "Looks like something went wrong. Please re-run the update on your computer. Get hel at ni.de/kontrol-setup" When I start the updater it shows the correkt Serial Number, but shows only version 0.0.1 as installed firmware on my S61.…
-
Kontrol S61 MK Firmware Update Failed - Keyboard Now Unresponsive
"Hello Native Instruments Support Team and Community, I'm experiencing a critical issue with my Kontrol S61 MK[Your MK Version] following a failed firmware update. During the update process via Native Access, I received the error message: 'Looks like something went wrong, please re-run the update on your computer.' I…
-
Cannot Find MK3 DFU Driver
I Use S88 MK3, bought 2025 April 01 First Update i wait very long time. so i ejected and reboot PC then i met this issue, i tried many suggestion but suddenly i cannot find MK3 DFU driver and couldn't scan my s88. how can i solve this problem?
-
Why doesn't the firmware detect my Komplete Kontrol M32 midi keyboard?
I bought a komplete kontrol m32 midi keyboard and at first it worked fine until one day it just stopped working, I bought another pc thinking that was the problem but now it doesn't work either and the error comes when I try to scan the midi with the firmware driver
-
Kontrol M32 stuck at 'Firmware Update in Progress' screen upon boot
As the title says - It's just stuck there with that message on the LCD display. Doesn't show up as a midi device in the daw. Unplugged/replugged usb etc with shift key held down to no avail. Messed around with updating some native access stuff too, same error. Totally frustrating. Anyone know how to solve? Thanks
-
Firmware updater not recognizing Komplete Kontrol MK3 S88
Hi, my updater will not recognize the keyboard. I'm running an M3 Mac Air with Sequoia. Loaded firmware is 0.6.0 (obviously I missed a few updates). I've tried closing all apps, turning on / off the keyboard and computer, and updated all the software on the Mac. I've also tried using different adapters (this is USB A from…